• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.2 s.20
• /
• pp.87-95
• /
• 2002

Real-time Kinematic GPS enables high accuracy Positioning by real time. If ambiguity use an integer solution, can obtain accuracy of several 'mm', and can obtain accuracy of tens 'em' if use real solution. In this study, We accomplish surveying by existent traditional surveying techniques (Total Station), Static GPS techniques and RTK-GPS techniques by Field Calibration about uniformity measuring point and then compared and ana1yzed each techniques positioning accuracy etc.. Result that achieve by Static-GPS in Plane area, about all measuring points, expressed error fewer than 3cm. Result that achieve RTK-GPS Surveying by Field Calibration in Plane area, could know that RTK-GPS techniques by Field Calibration is available in Plane area because expressing errors fewer than all 6cm, except case that do not get fixed solution of ambiguity Field Calibration RTK-GPS could know economically than existent conventional type measurement and existent GPS's measurement techniques that efficiency is very high.

• Spatial Information Research
• /
• v.9 no.2
• /
• pp.309-324
• /
• 2001

To apply the real-time kinematic GPS surveying technique, this research has tried to obtain the TOKYO datum first from the continuous reference stations distributed all over the country. Then, analysis of the geography of a coastal area including both of land and sea has been carried out by the post-processed continuous kinematic GPS technique and the real-time kinematic GPS surveying technique. After considering the initial conditions and measuring time zone for real-time kinematic GPS, post-processed and the real-time kinematic GPS measurements have been carried out. A new system has been proposed to store measured data by using a program developed to store GPS data in real time and to monitor the satellite condition through controller simultaneously. The accuracy of GPS data acquired in real time was as good as that acquired by post processing. It is expected that it will be useful for the analysis of coastal geographic characteristics because DTM can be also constructed for the harbor reclamation, the dredging and the variation of soil movement in a river.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.8
• /
• pp.789-797
• /
• 2006

A new method for the GPS repeater based indoor positioning is proposed and its feasibility is verified by experiments in previous paper. But the problems how can identify switching GPS repeater's ID and when switching will be occurred are remained. To solve the problem faced with, we propose the time synchronized switching GPS repeater and the methods of the detection of switching time and the estimation of TDOA. First, switching GPS repeater retransmits the signals synchronized on GPS time, sequentially. Always, first switching time is synchronized with 1 PPS. Second, we formulate the detection of switching time and the estimation of TDOA and propose the various methods. No method is existed absolutely superior to others in any conditions but the method is existed superior to others in specific condition. Finally, feasibility of indoor positioning using time-synchronized switching GPS repeater is evaluated through experiments in anechoic chamber and general environment with multipath.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.455-461
• /
• 2004

Now, GPS survey is used on equipment from leisure to precise geodetic survey and nation admits the result of GPS survey. When surveyors perform precise GPS survey, they use post processing method but they greatly use real time processing method to consider field status. Especially, when surveyors measure the result of moving target, they use real time GPS survey to the best method. For this study, the author precisely surveyed distance of ship launching from shipyard on real time using real time precise GPS method. In this paper, the author compares and examines the accuracy of first real time precise GPS survey method nationally and the capability on use. And the author performed real time precise GPS survey in NOKBONG and 21C shipyard positioning at GEOJEDO.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.151-158
• /
• 2006

As GPS 'selective availability' was turned off in 2000, GPS related fields and markets are explosively extended. In mapping area, GPS/INS aided photogrammetry proved it is much cost and time effective method keeping enough accuracy as compared with traditional photogrammetry works. The advantage of GPS/INS integration is interdependence. Even if GPS signal was blocked in some time, the position accuracy is not affected. In this study, various GPS signal time gap was used in GPS/INS AT process. Field surveyed ground points were used in accuracy check with GPS/INS AT check points. And the result showed enough accuracy of photogrammetry work rule of NGII. y.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.4
• /
• pp.411-420
• /
• 2009

To plan a GPS survey, they have to decide if a survey can be conducted at a specific point and time based on the predicted GPS ephemeris. In this study, to predict ephemeris, we used the repeat time of a GPS satellite. The GPS satellite repeat time was determined by analysing correlation among three-dimensional satellite coordinates provided by the 48-hour GPS ephemeris in the ultra-rapid orbits. By using the calculated repeat time and Lagrange interpolation polynomials, we predicted GPS orbits f3r seven days. As a result, the RMS of the maximum errors in the X, Y, and Z coordinates were 39.8 km 39.7 km and 19.6 km, respectively. And the maximum and average three-dimensional positional errors were 119.5 km and 48.9 km, respectively. When the maximum 3-D positioning error of 119.5 km was translated into the view angle error, the azimuth and elevation angle errors were 9.7'and 14.9', respectively.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.187-190
• /
• 2010

GPS survey came into wide use, but there are inefficient parts in related laws and regulations. Especially, to get GPS surveying results under 1.5cm permissible error the observation time must be longer than 8 hours in triangulation points surveying regulations. However, GPS surveying technology is developing now, so results could be acceptable under 4 hours observation time. Therefore, this study made a stable standard of observation time in GPS survey by comparing the errors due to observation time, and used PAJU, DOND and YANP's GPS data and 6 cadastral points' survey data. Also, to analyze the variations of results due to baseline distance, applied each GPS site as a fixed point and compared the positions. As a result, the stable satisfactory results were calculated under 4 hour survey, when the baseline distances were under 30km.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.2
• /
• pp.81-87
• /
• 1990

International time comparisons using a commercial GPS receiver, with the common-view program of GPS satellite time links, have been carried out between Korea Standards Research Institute(KSRI) and Communications Research Laboratory(CRL) of Japan, and also between KSRI and United Stated Neval Observatory(USNO). The frequency stability is about 1.5 parts in $10^-13$ for the averaging time of 1day. The result of time comparisons obtained by the GPS common-view technique was about 10 times better than that by the LORAN-C(Long Range Navigation) ground wave technique.

• Journal of Positioning, Navigation, and Timing
• /
• v.3 no.4
• /
• pp.163-170
• /
• 2014

A pseudolite is used as a GPS backup system, and is also used for the purpose of indoor navigation and correction information transmission. It is installed on the ground, and transmits signals that are similar to those of a GPS satellite. In addition, in recent years, studies on the improvement of positioning accuracy using the pseudorange measurement of a pseudolite have been performed. As for the effect of the time synchronization error between a pseudolite and a GPS satellite, a time synchronization error of 1 us generally induces a pseudorange error of 300 m; and to achieve meter-level positioning, ns-level time synchronization between a pseudolite and a GPS satellite is required. Therefore, for the operation of a pseudolite, a time synchronization algorithm between a GPS satellite and a pseudolite is essential. In this study, for the time synchronization of a pseudolite, "a pseudolite time synchronization method using the time source of UTC (KRIS)" and "a time synchronization method using a GPS timing receiver" were introduced; and the time synchronization performance depending on the pseudolite time source and reference time source was evaluated by designing a software-based pseudolite time synchronization performance evaluation simulation platform.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.5
• /
• pp.531-537
• /
• 2010

Real-time Aerial Monitoring System performs the rapid mapping in an emergency situation so that the geoinformation could be constructed in near real time. In this system, the position and attitude information from GPS/INS integration algorithm is used to perform the aerial triangulation(AT) without GCPs. Therefore, if we obtain Exterior Orientation(EO) estimates from AT sequentially, EO are used as the measurements in the Kalman filter. In this study, we simulate the GPS/IMS/Image data for an UAV-based aerial monitoring system and compare the GPS/INS/AT with and without from AT. Comparative analysis showed that result from the GPS/INS/AT with EO update is more accurate than without the update. However, when the vehicle turns, the position error significantly increases which need more analysis in the future.