• Journal of Biosystems Engineering
• /
• v.33 no.6
• /
• pp.423-429
• /
• 2008

This study was performed to investigate the effects of inertial navigation system (INS) / global positioning system (GPS) sensor fusion for agricultural vehicle navigation. An extended Kalman filter algorithm was adopted for INS/GPS sensor fusion in an integrated mode, and the vehicle dynamic model was used instead of the navigation state error model. The INS/GPS system was consisted of a low-cost gyroscope, an odometer and a GPS receiver, and its performance was tested through computer simulations. When measurement noises of GPS receiver were 10, 1.0, 0.5, and 0.2 m ($1{\sigma}$), RMS position and heading errors of INS/GPS system at 5 m/s straight path were remarkably reduced with 10%, 35%, 40%, and 60% of those obtained from the GPS receiver, respectively. The decrease of position and heading errors by using INS/GPS rather than stand-alone GPS can provide more stable steering of agricultural equipments. Therefore, the low-cost INS/GPS system using the extended Kalman filter algorithm may enable the self-autonomous navigation to meet required performance like stable steering or more less position errors even in slow-speed operation.

• Journal of Positioning, Navigation, and Timing
• /
• v.5 no.4
• /
• pp.165-172
• /
• 2016

A Global Navigation Satellite System (GNSS), which is typically exemplified by the Global Positioning System (GPS), employs a open signal structure so it is vulnerable to spoofing electronic attack using a similar malicious signal with that used in the GPS. It is necessary to require a spoofing test evaluation environment to check the risk of spoofing attack and evaluate the performance of a newly developed anti-spoofing technique against spoofing attacks. The present paper proposed a simulation method of spoofing environment based on simulator that can be implementable in a test room and analyzed the spoofing simulation performance using commercial GPS receivers. The implemented spoofing simulation system ran synchronized two GPS simulator modules in a single scenario to generate both of spoofing and GPS signals simultaneously. Because the signals are generated in radio frequency, a commercial GPS receiver can be tested using this system. Experimental test shows the availability of this system, and anti-spoofing performance of a commercial GPS receiver has been analyzed.

• Aerospace Engineering and Technology
• /
• v.7 no.1
• /
• pp.161-169
• /
• 2008

This paper introduces test configuration and operation method for the GPS receiver system under electromagnetic test of KSLV-I upper-stage as a system qualification level and describes performance analysis of the test results. The GPS receiver system has clearly passed the electromagnetic test specifications of component level which is based on MIL-STD-461E through several design changes. Under electromagnetic test as a system qualification level, the GPS receiver system normally operates in spite of electromagnetic interferences with other systems. Performance of the GPS receiver system is also, not degraded on the condition of electromagnetic field incidence and electrostatic discharge. The KSLV-I GPS receiver system, as a result, is verified on the electromagnetic condition of the KSLV-I upper-stage.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.1
• /
• pp.33-38
• /
• 2002

The object of this study is to verify the feasibility in the application of the GPS system data to the existing geodetic and cadastral survey system. WGS-84 data, which were converted into domestic geometric coordinate system, were compared with those of the existing triangular coordinate system in Gwangju area. The significant results in this study are summarized below ; GPS system is more speedy and accurate than the existing triangular coordinate system in the survey of points in triangular coordinate or on the map. And the error in the GPS system was more uniform than that of the existing triangular coordinate system. GPS system is more effective than the existing triangular coordinate system in the future geodetic and cadastral survey because GPS data can be processed by the computer. It is necessary to calculate the conversion coefficients to apply GPS data practically to the existing geodetic and cadastral survey system. It can be achieved by the individual investigation on how the existing data in the domestic coordinate system were determined.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11B
• /
• pp.1618-1623
• /
• 2010

In this paper, we propose a new assisted global positioning system (A-GPS) using terrestrial digital multimedia broadcasting (T-DMB) data services. Because of the weak signal strength from GPS satellite and the signal blockage, it is difficult for the telematics terminal to determine the position in urban area. Proposed A-GPS system calculates pseudo range (PR) from timing information of GPS satellites and obtains the satellite information such as ephemeris from T-DMB station to determine the current position. Compared to conventional GPS system, the proposed system has better performance in terms of the fast time to first fix (TTFF), low horizontal dilution of precision (HDOP). Experimental results show that the proposed system is a feasible and robust solution.

• Journal of Korean Society for Geospatial Information Science
• /
• v.6 no.2 s.12
• /
• pp.81-90
• /
• 1998

With the high demand for Geographic Information System and the diversification of Spatial Information, it has been required a rapid and accurate input system, updating system and an efficient field survey system to organize database for thematic mapping. Following the purpose, several indispensable modules have to be Invented to build a GPS Lap-top Computer System using low cost GPS receivers. These modules include such as an interface module between GPS receivers and lap-top computers, a data processing module for standalone GPS or Real-time Differential GPS, a module to input or amend digital map and to transfer three-dimensional coordinates in real-time, and finially a module to enter attribute value and feature code based on standard specification of digital maps for controlling position and attribute data. In this paper, it Is presented the efficiency of method to acquire and to input or to amend spatial information using a GPS Lap-top Computer System.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.103-106
• /
• 2004

Nowadays it is necessary to manage the road system effectively because of the explosive increment of vehicle and goods. To resolve this problems through the fast upgrade of information about position and time of moving vehicle, the combined navigation system using GPS and complementary navigation system, i.e. INS, DR, etc. has been used. Although GPS is popular for the vehicle navigation system, this is not useful for the kinematic positioning of the vehicles in the urban canyon because of its few satellites. Therefore, this study deals with the kinematic positioning of the vehicles with GPS CORS to GPS navigation. For this, first the static single point positioning of GPS and GPS for reference station was performed to evaluate the accuracy of GPS positioning. Next, in the post-processed, the DGPS (Differential GPS) was performed for the kinematic positioning of the vehicles. So, it is expected that GPS CORS can be applicable to the control of traffic flow, the effective management of road system, and the development of ITS and it is regarded that the combined navigation system of vehicles with GPS, INS, and DR, etc. should be studied constantly.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.7
• /
• pp.688-693
• /
• 2007

The INS/GPS integration system is designed by employing an adaptive filter that can estimate the measurement noise variance using the residual of the filter. To verify the efficiency of the proposed loosely-coupled INS/GPS integration system, simulation is performed by assuming that GPS information has large position errors. Simulation results show that the proposed integration system with the adaptive filter is more effective in estimating the position and attitude errors than those with the Extended Kalman Filter.

• Journal of Aerospace System Engineering
• /
• v.4 no.3
• /
• pp.17-23
• /
• 2010

GPS sensors provide accurate position and velocity of moving vehicles. However, GPS is weak at intermittent signal loss and large position error. Combination with INS improves the GPS position accuracy during the GPS signal loss. In this paper, a fusion filter using GPS and INS is developed and its perfomance is analyzed with RC car and RC airplane experiments.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.3
• /
• pp.65-70
• /
• 2010

Steel frame construction in high places entails many risk factors. In order to improve the safety and productivity of steel frame construction, a project to develop a robotic tower-crane has been undertaken. As the first step, a real-time lifting-path tracking system is being developed. In a previous study, a laser-based tracking system was proposed. While a laser-based tracking system requires at least three laser sensors to detect the x, y, z coordinates of a lifted steel member, a GPS-based system has an advantage over the laser-based system, in that the x, y, z coordinates of a lifted steel member can be detected by a single GPS sensor. To improve the accuracy, arelative positioning method using two GPS sensors was proposed in a previous study. This paper reports an improved GPS-based lifting-path tracking system of a tower crane based on an integrated RF modem and GPS system. The results showedthat the RF modem could successfully send the identifier information to a server a maximum distance of 1 km away from the lifted steel beam, and the lifting path information of each beam captured by the GPS-based tracking system was successfully saved together. Also, byusing an improved algorithm for the GPS relative positioning method, the deviation was reduced to 0.61 m on average.