• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.3
• /
• pp.129-141
• /
• 2005

It is difficult to edit large-scale digital maps because of problems of cost and process and it is carried out by aerial photogrammetry in renewal periods. Five years of update period cannot provide exact data required in the fast-moving age. This study is to analyze applicability and impact for editing digital map of road system using the GPS-Van. Results are compared with accuracy of the data acquisition with GPS-Van positioning. INS data are affected by the barrier to receive GPS data. But high accuracy were achieved by thorough plans according to work order. By using GPS Van and fieldwork at the same time for editing and renewal of digital map, it is expected that this method can be used to reduce costs in the economic and temporal aspects, and provide rapid and accurate digital map of road system.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.3
• /
• pp.263-272
• /
• 2001

For a high resolution real-time kinematic GPS surveying using carrier phase, positioning accuracy according to the OTF initialization was better than 1 cm with more than 5-minute initialization within 20 km baseline. Also, it is recommended that measurements be carried out when PDOP and RDOP can be kept less than 4.0 since the geometrical layout of satellites has a great influence on the positioning accuracy. After considering the initial conditions and measuring time zone for real-time kinematic GPS. post-processed continuous kinematic GPS and real-time kinematic GPS measurements have been carried out. A new system has been proposed to store measured data by using a program developed to store GPS data in real time and to monitor the satellite condition through controller at the time of measurement. As a result, it has been revealed that possible noise in surveying could be corrected and the accuracy could be improved.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.588-590
• /
• 2003

For the normal operations, KOMPSAT-1 orbits are determined using GPS navigation solutions data such as position and velocity vectors. Currently, the accuracy of GPS navigation solution data is generally known as on the order of 10~30 m with the removal of S/A. In this paper, an estimate of the current orbit determination accuracy for the KOMPSAT-1 is given. For the evaluation of orbit determination accuracy, the orbit overlap comparison is used since no independent orbits of comparable accuracy are available for comparison. As a result, It is shown that the orbit accuracy is on the order of 5 m RMS with 4 hrs arc overlap for the 30 hr arc.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.103-106
• /
• 2004

Nowadays it is necessary to manage the road system effectively because of the explosive increment of vehicle and goods. To resolve this problems through the fast upgrade of information about position and time of moving vehicle, the combined navigation system using GPS and complementary navigation system, i.e. INS, DR, etc. has been used. Although GPS is popular for the vehicle navigation system, this is not useful for the kinematic positioning of the vehicles in the urban canyon because of its few satellites. Therefore, this study deals with the kinematic positioning of the vehicles with GPS CORS to GPS navigation. For this, first the static single point positioning of GPS and GPS for reference station was performed to evaluate the accuracy of GPS positioning. Next, in the post-processed, the DGPS (Differential GPS) was performed for the kinematic positioning of the vehicles. So, it is expected that GPS CORS can be applicable to the control of traffic flow, the effective management of road system, and the development of ITS and it is regarded that the combined navigation system of vehicles with GPS, INS, and DR, etc. should be studied constantly.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.3
• /
• pp.528-533
• /
• 2005

The purpose of the study is to develop ship's bearing sensor using GPS receiver which can play a role as a ship's secondary compass. In this research, two GPS receivers are used to determine the bearing in real time. Then we investigated the bearing accuracy associated with the error pattern of two GPS receivers. Especially, the results are as follows the investigation on the system design of GPS-Compass, the modeling to compute heading of sailing, the analysis on bearing accuracy with the error pattern, the defining possibility to play a role as a ship's secondary compass.

• Journal of Positioning, Navigation, and Timing
• /
• v.2 no.2
• /
• pp.131-137
• /
• 2013

In this study, positioning results that combined the code observation information of GPS and GLONASS navigation satellites were analyzed. Especially, the distribution of GLONASS satellites observed in Korea and the combined GPS/GLONASS positioning results were presented. The GNSS data received at two reference stations (GRAS in Europe and KOHG in Goheung, Korea) during a day were processed, and the mean value and root mean square (RMS) value of the position error were calculated. The analysis results indicated that the combined GPS/GLONASS positioning did not show significantly improved performance compared to the GPS-only positioning. This could be due to the inter-system hardware bias for GPS/GLONASS receivers, the selection of transformation parameters between reference coordinate systems, the selection of a confidence level for error analysis, or the number of visible satellites at a specific time.

• Journal of Astronomy and Space Sciences
• /
• v.16 no.2
• /
• pp.285-292
• /
• 1999

To determine a geographical position by GPS signal, the effect of the ionosphere must be considered to improve accuracy. This has led us to continuously try to find the TEC of the ionosphere by using the GPS signal. So far the way to find TEC has been developed and the information obtained from this can be used not only to increase the accuracy of determining the position, but also to study the ionosphere. In this research, the TEC MAP over Korea was obtained by using the data collected from eight GPS stations around the Far East Asia, which is the common way to represent TEC over some regional or global region.

• International Journal of Aeronautical and Space Sciences
• /
• v.2 no.1
• /
• pp.67-77
• /
• 2001

In recent navigation system, the profitable solution is to integrate the GPS and Stapdwon INS (SDINS) system and its integration allows compensation for shortcomings of each system. This paper describes the hardware preparation and presents the test results obtained from the automobile test of the developed system. The automobile tests was conducted with two kinds of inertial sensors and GPS receivers : short range and middle range test, to verify and evaluate the performance of the integrated navigation system. The reference of position is given by the Differential GPS(DGPS) which has cm-level accuracy to compare the accuracy of system. Kalman filtering is used for integrating GPS and SDINS and this filter effectively allows the long-term stability of GPS to correct and decrease the time deviation error of SDINS.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.75-75
• /
• 2000

Recently, number of navigation system using GPS and other complementary sensors has been developed to offer high-position accuracy. In this paper, an integration of GPS and Dead-Reckoning, which consists of a fiber optical gyroscope and two high-precision wheel-motor encoders for a unmanned navigation system, is presented. The main objective of this integrated GPS/DR unmanned navigation system is to provide accurate position and heading navigation data continuously for autonomous mobile robot. We propose a method for increasing the accuracy of the estimated position of the mobile robot by its DR sensors, high-precision wheel-motor encoders and a fiber optical gyroscope. We used Kalman filter theory to combine GPS and DR measurements. The performance of GPS/DR navigation system is evaluated.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.564-567
• /
• 2007

GPS(Global Positioning System) data has a high accuracy at outdoor positioning generally, but its accuracy decreases in the urban areas with dense buildings. Moreover insufficient number of satelllites prevent us GPS positioning at inside of buildings. To complement these shortcomings of GPS, RFID(Radio Frequency IDentification) has been studied on indoor positioning parts. In Ubiquitous environment, LBS(Location Based Service) which can be used anytime and anywhere is an essential component. We use kalman filter to estimate the real location in GPS and RFID handover area. This study's purpose is to make a continuous positioning system using interlocking RFID and GPS.