• Journal of Aerospace System Engineering
• /
• v.17 no.2
• /
• pp.38-44
• /
• 2023

This study aims to determine how agricultural drones are operated for flight tests using a 5G communication in order to carry out a mission such as sensing agricultural crop healthy status with special cameras. Drones were installed with a multi-spectral and IR camera to capture images of crop status in separate altitudes with different speeds. A multi-spectral camera can capture crop image data using five different particular wavelengths with a built-in GPS so that captured images with synchronized time could provide better accuracy of position and altitude during the flight time. Captured thermal videos are then sent to a ground server to be analyzed via 5G communication. Thus, combining two cameras can result in better visualization of vegetation areas. The flight test verified how agricultural drones equipped with special cameras could collect image data in vegetation areas.

• Journal of Advanced Navigation Technology
• /
• v.26 no.6
• /
• pp.412-417
• /
• 2022

In this paper, multi-GNSS network RTK MAC correction generation software developed based on MATLAB GUI is introduced. The software was developed as a post-processing software based on simulation data to evaluate the feasibility of an algorithm for generating correction for multi-GNSS including GPS, GLONASS, and Galileo. As a result of software operation, network RTK correction for each system of multi-GNSS is output in MATLAB file format. In this paper, to evaluate the performance of the developed software, the residual error was analyzed after applying the correction generated through the software to the user. As a result of the analysis, it was confirmed that effective network RTK correction could be generated by confirming that the residual errors of users were maintained at 10 cm or less.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3A
• /
• pp.297-307
• /
• 2010

Recently, maintenance engineering and technology for civil and building structures have begun to draw big attention and actually the number of structures that need to be evaluate on structural safety due to deterioration and performance degradation of structures are rapidly increasing. When stiffness is decreased because of deterioration of structures and member cracks, dynamic characteristics of structures would be changed. And it is important that the damaged areas and extent of the damage are correctly evaluated by analyzing dynamic characteristics from the actual behavior of a structure. In general, typical measurement instruments used for structure monitoring are dynamic instruments. Existing dynamic instruments are not easy to obtain reliable data when the cable connecting measurement sensors and device is long, and have uneconomical for 1 to 1 connection process between each sensor and instrument. Therefore, a method without attaching sensors to measure vibration at a long range is required. The representative applicable non-contact methods to measure the vibration of structures are laser doppler effect, a method using GPS, and image processing technique. The method using laser doppler effect shows relatively high accuracy but uneconomical while the method using GPS requires expensive equipment, and has its signal's own error and limited speed of sampling rate. But the method using image signal is simple and economical, and is proper to get vibration of inaccessible structures and dynamic characteristics. Image signals of camera instead of sensors had been recently used by many researchers. But the existing method, which records a point of a target attached on a structure and then measures vibration using image processing technique, could have relatively the limited objects of measurement. Therefore, this study conducted shaking table test and field load test to verify the validity of the method that can measure multi-point displacement responses of structures using image processing technique.

• Journal of Broadcast Engineering
• /
• v.22 no.6
• /
• pp.713-723
• /
• 2017

Since the panoramic image can overcome the limitation of the viewing angle of the camera and have a wide field of view, it has been studied effectively in the fields of computer vision and stereo camera. In order to generate a panoramic image, stitching images taken by a plurality of general cameras instead of using a wide-angle camera, which is distorted, is widely used because it can reduce image distortion. The image stitching technique creates descriptors of feature points extracted from multiple images, compares the similarities of feature points, and links them together into one image. Each feature point has several hundreds of dimensions of information, and data processing time increases as more images are stitched. In particular, when a panorama is generated on the basis of an image photographed by a plurality of unspecified cameras with respect to an object, the extraction processing time of the overlapping feature points for similar images becomes longer. In this paper, we propose a preprocessing process to efficiently process stitching based on an image obtained from a number of unspecified cameras for one object or environment. In this way, the data processing time can be reduced by pre-grouping images based on camera sensor information and reducing the number of images to be stitched at one time. Later, stitching is done hierarchically to create one large panorama. Through the grouping preprocessing proposed in this paper, we confirmed that the stitching time for a large number of images is greatly reduced by experimental results.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.6_1
• /
• pp.447-454
• /
• 2013

The geolocation accuracy of SAR satellite imagery is affected by orbit and sensor information and external variables such as DEM accuracy and atmospheric delay. To predict geolocation accuracy of KOMPSAT-5 and KOMPSAT-6, this paper uses TerraSAR-X imagery which has similar spec. Simulation data for sensitivity analysis are generated using range equation and doppler equation with several key error sources. As a result of simulation analysis, the effect of sensor information error is larger than orbit information error. Especially, onboard electronic delay needs to be monitored periodically because this error affects geolocation accuracy of slant range direction by 30m. Additionally, DEM accuracy causes geolocation error by 20~30m in mountainous area and atmospheric delay can occur by 5m in response to atmospheric condition and incidence angle.

• Korean Journal of Remote Sensing
• /
• v.31 no.3
• /
• pp.215-226
• /
• 2015

Normally, aero photography using UAV uses about 430 MHz bandwidth radio frequency (RF) modem and navigates and remotely controls through the connection between UAV and ground control system. When using the exhausting method, it has communication range of 1-2 km with frequent cross line and since wireless communication sends information using radio wave as a carrier, it has 10 mW of signal strength limitation which gave restraints on life my distance communication. The purpose of research is to use communication technologies such as long-term evolution (LTE) of smart camera, Bluetooth, Wi-Fi and other communication modules and cameras that can transfer data to design and develop automatic shooting system that acquires images to UAV at the necessary locations. We conclude that the android based UAV filming and communication module system can not only film images with just one smart camera but also connects UAV system and ground control system together and also able to obtain real-time 3D location information and 3D position information using UAV system, GPS, a gyroscope, an accelerometer, and magnetic measuring sensor which will allow us to use real-time position of the UAV and correction work through aerial triangulation.

• The KIPS Transactions:PartD
• /
• v.15D no.3
• /
• pp.399-410
• /
• 2008

This paper suggests a new retrieval method using weighted vector sum to resolve a problem of traditional location-based retrieval method, nearest neighbor (NN) query, and NN query using direction. The proposed method filters out data with the radius, and then the remained retrieval area is filtered by a direction information compounded of a user's moving direction, a pre-fixed interesting direction, and a pre-fixed retrieval angle. The moving direction is computed from a vector or a weighted vector sum of several vectors using a weight to adopt several cases. The retrieval angle can be set from traditional $360^{\circ}$ to any degree you want. The retrieval data for this method can be a still and moving image recorded shooting location, and also several type of media like text, web, picture offering to customer with location of company or resort. The suggested method guarantees more accurate retrieval than traditional location-based retrieval methods because that the method selects data within the radius and then removes data of useless areas like passed areas or an area of different direction. Moreover, this method is more flexible and includes the direction based NN.

• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.685-691
• /
• 2007

In this paper through Honan high-speed railroad which is planned with the north and south axis, we will verify the feasibility of the coordinate conversion using railroad control points after regarding current planned-railroad as the linear central axises. From analysis, distortion of Y axis varies 21 cm to 40 cm diminishing to a gentle straight line, distortion of X axis varies 14 cm to 29 cm. Through a revision, the deviation value between the coordinates were 6 mm to 9 mm and it satisfied the allowable error of national geographic information institute which is following ITRF (International Terrestrial Reference Frame) and cadastral boundary survey (10 cm). consequently the coordinate conversion is possible using railroad control points as common control points.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1099-1104
• /
• 2007

The visual implementation of 3-dimensional national environment is focused by the requirement and importance in the fields such as, national development plan, telecommunication facility deployment plan, railway construction, construction engineering, spatial city development, safety and disaster prevention engineering. The currently used DEM system using contour lines, which embodies national geographic information based on the 2-D digital maps and facility information has limitation in implementation in reproducing the 3-D spatial city. Moreover, this method often neglects the altitude of the rail way infrastructure which has narrow width and long length. There it is needed to apply laser measurement technique in the spatial target object to obtain accuracy. Currently, the LiDAR data which combines the laser measurement skill and GPS has been introduced to obtain high resolution accuracy in the altitude measurement. In this paper, we first investigate the LiDAR based researches in advanced foreign countries, then we propose data a generation scheme and an algorithm for the optimal manage and synthesis of railway facility system in our 3-D spatial terrain information. For this object, LiDAR based height data transformed to DEM, and the realtime unification of the vector via digital image mapping and raster via exactness evaluation is transformed to make it possible to trace the model of generated 3-dimensional railway model with long distance for 3D tract model generation.

• Journal of Korea Spatial Information System Society
• /
• v.8 no.2 s.17
• /
• pp.53-73
• /
• 2006

Recently, the need for Location-Based Services (LBS) has increased due to the development of mobile devices, such as PDAs, cellular phones and GPS. As a moving object database that stores and manages the positions of moving objects is the core technology of LBS, the scheme for maintaining the main memory DBMS to the server is necessary to store and process frequent reported positions of moving objects efficiently. However, previous works on a moving object database have studied mostly a disk based moving object index that is not guaranteed to work efficiently in the main memory DBMS because these indexes did not consider characteristics of the main memory. It is necessary to study the main memory index scheme for a moving object database. In this paper, we propose the main memory index scheme based on the R-tree for storing and processing positions of moving objects efficiently in the main memory DBMS. The proposed index scheme, which uses a growing node structure, prevents the splitting cost from increasing by delaying the node splitting when a node overflows. The proposed scheme also improves the search performance by using a MergeAndSplit policy for reducing overlaps between nodes and a LargeDomainNodeSplit policy for reducing a ratio of a domain size occupied by node's MBRs. Our experiments show that the proposed index scheme outperforms the existing index scheme on the maximum 30% for range queries.