• Journal of Positioning, Navigation, and Timing
• /
• v.4 no.3
• /
• pp.141-150
• /
• 2015

In this study, a Global Navigation Satellite System (GNSS) / Inertial Navigation System (INS) / odometer / barometer integrated navigation system that uses a commercial navigation device including Micro Electro Mechanical Systems (MEMS) accelerometer and gyroscope in addition to GNSS, odometer information obtained from a vehicle, and a separate MEMS barometer sensor was implemented, and the performance was verified. In the case of GNSS and GNSS/INS integrated navigation system that are generally used in a navigation device, the performance would deteriorate in areas where GNSS signals are not available. Therefore, an integrated navigation system that calculates a better navigation solution in areas where GNSS signals are not available compared to general GNSS/INS by correcting the velocity error of GNSS/INS using an odometer and by correcting the cumulative altitude error of GNSS/INS using a barometer was suggested. To verify the performance of the navigation system, a commercial navigation device (Softman, Hyundai Mnsoft, http://www.hyundai-mnsoft.com) and a barometer sensor (ST Company) were installed at a vehicle, and an actual driving test was performed. To examine the performance of the algorithm, the navigation solutions of general GNSS/INS and the GNSS/INS/odometer/barometer integrated navigation system were compared in an area where GNSS signals are not available. As a result, a navigation solution that has a smaller position error than that of GNSS/INS could be obtained in the area where GNSS signals are not available.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.14 no.1
• /
• pp.55-62
• /
• 2006

Ionospheric signal delay is a critical factor for precision differential GNSS(Global Navigation Satellite Systems) applications such as GBAS(Ground-Based Augmentation System) and SBAS (Satellite-Based Augmentation System). Most concern is the impact of the ionospheric storm caused by the interaction between Solar and geomagnetic activities. After brief description of the ionosphere and ionospheric storm, ionospheric models for SBAS are discussed. History of recent ionospheric storms is reviewed and their impact on GNSS is discussed. In order to support Korean GNSS augmentation system development, a preliminary study on the regional ionosphere performed. A software tool for computing regional ionospheric maps is being developed, and initial results during a recent storm period is analyzed.

• Journal of Positioning, Navigation, and Timing
• /
• v.13 no.3
• /
• pp.319-329
• /
• 2024

Various structures of navigation messages in Global Navigation Satellite System (GNSS) signals can be categorized into fixed, packetized, and mixed types, each with different broadcast intervals and sequences. In the fixed format, the broadcast intervals and sequences of navigation messages of Global Positioning System (GPS) L1 C/A and BDS B1I are strictly defined in the Interface Control Document (ICD). Navigation messages of GPS L2C, L5, Quasi-Zenith Satellite System (QZSS) L2C, L5, and BeiDou Navigation Satellite System (BDS) B1C are in a packetized format, and their broadcast sequence is not explicitly specified in the ICD; only the maximum broadcast intervals are described. In the mixed format, signals such as GPS L1C, QZSS L1 C/A, L1C, and BDS B2a exhibit both fixed and packetized patterns. Sequences of certain parts of the message are not defined. Therefore, in this study, experimental-based investigations were additionally conducted alongside an ICD investigation to analyze the current broadcast intervals and sequences of GNSS navigation messages.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.10a
• /
• pp.128-130
• /
• 2012

One of the hot issues on GNSS might be that China declared to broadcast the signal of the new Global Navigation Satellite System called Beidou-Compass in December 2011. The multi-GNSS systems with the existing GPS and GLONASS consist of more than 100 GNSS satellites and transmit their signals in near future. Many benefits are expected in accuracy, availability, integrity and increasing anti-jam performance. In this presentation, we have mainly investigated the latest issue for multi- GNSS and discussed spectrum analysis as well as the accuracy improvement issue. The use of the modern weapon system based on satellite navigation information was also briefly investigated in warfare.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.05a
• /
• pp.6-11
• /
• 2002

A term of GNSS(Global Navigation Satellite System) is widely used to represent a navigation method for global area using satellite in space orbit 1his system can provide accurate and continuous position, and timing sources synchronized to UTC. There are, however, certain disadvantage that system can not operate without line of sight environment to satellite, or system failure of either satellite or control station. It is the pseduolite technology for using indoor and also for back-up equipment of foreign system failure. Especially, ocean applications widely use the GNSS system for navigation, surveying, timing, and management of traffic, so, system failure of GNSS will be very critical problem to affect many aspects of ocean field. In this paper, we experimented the pseudolite technology for several application field to compare the result in different environment. We used the common CDGPS algorithm for in-door navigation and experimented in ocean engineering basin with metallic wall and gymnasiums with concrete wall. We also investigated the comparison result and considerations for ocean applications of pseudolite technology.

• Journal of Advanced Navigation Technology
• /
• v.19 no.6
• /
• pp.507-514
• /
• 2015

The Spatial information research institute of the LX Korea land and geospatial informatix corporation manages infrastructure for the LX global navigation satellite system (GNSS), which comprises 30 monitoring stations nationwide. Since 2014, it has conducted network real-time kinematic (RTK) tests using the master-auxiliary concept (MAC). This study introduces the infrastructure of LX GNSS and presents the results of a performance analysis of the LX RTK service. The analysis was based on a total of 25 cadastral topographic control points in Jeonju, Seoul, and Incheon. For each point, performance was measured over one observation, two repeated observations, and five repeated observations. The measurements obtained from LX MAC and the VRS of the National Geographic Information Institute were compared with the announced coordinates derived from cadastral topographic control points. As a result, the two systems were found to have similar performance with average error and standard deviation differing only by 1 to 2 cm.

• Journal of Positioning, Navigation, and Timing
• /
• v.8 no.2
• /
• pp.79-85
• /
• 2019

The mission tasks of polar exploration utilizing unmanned systems such as glacier monitoring, ecosystem research, and inland exploration have been expanded. To facilitate unmanned exploration mission tasks, precise and robust navigation systems are required. However, limitations on the utilization of satellite navigation system are present due to satellite orbital characteristics at the polar region located in a high latitude. The orbital inclination of global positioning system (GPS), which was developed to be utilized in mid-latitude sites, was designed at $55^{\circ}$. This means that as the user is located in higher latitudes, the satellite visibility and vertical precision become worse. In addition, the use of satellite-based wide-area augmentation system (SBAS) is also limited in higher latitude regions than the maximum latitude of signal reception by stationary satellites, which is $70^{\circ}$. This study proposes a local-area augmentation system that additionally utilizes Global Navigation Satellite System (GLONASS) considering satellite navigation system environment in Polar Regions. The orbital inclination of GLONASS is $64.8^{\circ}$, which is suitable in order to ensure satellite visibility in high-latitude regions. In contrast, GLONASS has different system operation elements such as configuration elements of navigation message and update cycle and has a statistically different signal error level around 4 m, which is larger than that of GPS. Thus, such system characteristics must be taken into consideration to ensure data integrity and monitor GLONASS signal fault. This study took GLONASS system characteristics and performance into consideration to improve previously developed fault detection algorithm in the local-area augmentation system based on GPS. In addition, real GNSS observation data were acquired from the receivers installed at the Antarctic King Sejong Station to analyze positioning accuracy and calculate test statistics of the fault monitors. Finally, this study analyzed the satellite visibility of GPS/GLONASS-based local-area augmentation system in Polar Regions and conducted performance evaluations through simulations.

• Journal of Positioning, Navigation, and Timing
• /
• v.8 no.4
• /
• pp.153-164
• /
• 2019

This paper presents the development of an end-to-end numerical simulator for signal design of the next generation global navigation satellite system (GNSS). The GNSS services are an essential element of modern human life, becoming a core part of national infra-structure. Several countries are developing or modernizing their own positioning and timing system as their demand, and South Korea is also planning to develop a Korean Positioning System (KPS) based on its own technology, with the aim of operation in 2034. The developed simulator consists of three main units such as a signal generator, a channel unit, and a receiver. The signal generator is constructed based on the actual navigation satellite payload model. For channels, a simple Gaussian channel and land mobile satellite (LMS) multipath channel environments are implemented. A software receiver approach based on a commercial GNSS receiver model is employed. Through the simulator proposed in this paper, it is possible to simulate the entire transceiver chain process from signal generation to receiver processing including channel effect. Finally, numerical simulation results for a simple example scenario is analyzed. The use of the numerical signal simulator in this paper will be ideally suited to design a new navigation signal for the upcoming KPS by reducing the research and development efforts, tremendously.

• Journal of Positioning, Navigation, and Timing
• /
• v.13 no.2
• /
• pp.117-129
• /
• 2024

In this paper, we survey recent trends of International Global Navigation Satellite System (GNSS) organizations such as the International Committee on GNSS (ICG), International Civil Aviation Organization (ICAO), International Maritime Organization (IMO), and International Telecommunication Union (ITU), and investigate their impact on the maritime and aviation sectors. Each international organization promotes international cooperation, improvement of service quality, assurance of security, compliance with international regulations, and technological innovation and development. ICG develops a variety of satellite navigation enhancement systems. ICAO establishes international aviation regulations and standards to enhance aviation safety and security. IMO establishes international shipping conventions and rules to protect and regulate the shipping environment. Lastly, ITU establishes international communication regulations and standards. Investigation of such international organizations plays an important role in increasing the efficiency and reliability of GNSS systems. Each international organization promotes international cooperation, improvement of service quality, assurance of security, compliance with international regulations, and technological innovation and development. In the future, interoperability and compatibility with new satellite navigation systems and other GNSS and satellite navigation enhancement systems must be secured, so and thus investigation of international organizations must be conducted first.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.3
• /
• pp.273-284
• /
• 2020

The performance of Global Navigation Satellite System (GNSS) chipset and Inertial Measurement Unit (IMU) sensors embedded in smartphones for location-based services (LBS) is limited due to the economic reasons for their mass production. Therefore, it is necessary to efficiently process the output data of the smartphone's embedded sensors in order to derive the optimum navigation values and, as a previous step, output performance of smartphone embedded sensors needs to be verified. This paper analyzes the navigation performance of such devices by processing the raw measurements data output from smartphones. For this, up-to-dated versions of smartphones provided by Samsung (Galaxy s10e) and Xiaomi (Mi 8) are used in the test experiment to compare their performances and characteristics. The GNSS and IMU data are extracted and saved by using an open market application software (Geo++ RINEX Logger & Mobile MATLAB), and then analyzed in post-processing manner. For GNSS chipset, data is extracted from static environments and verified the position, Carrier-to-Noise (C/N₀), Radio Frequency Interference (RFI) performance. For IMU sensor, the validity of navigation and various location-based-services is predicted by extracting, storing and analyzing data in static and dynamic environments.