• 제목/요약/키워드: GND

검색결과 52건 처리시간 0.032초

누룩과 입국을 달리한 막걸리에서 항균활성을 가진 미생물의 분리동정 (Isolation and Identification of Microorganisms with Antimicrobial Activity in Makgeolli of Different Kinds Koji and Nuruk)

  • 이준기;조현주;윤진아;정강현;송병춘;김경임;안정희
    • 한국식품영양과학회지
    • /
    • 제43권4호
    • /
    • pp.577-583
    • /
    • 2014
  • 누룩군과 입국군을 달리 첨가하여 제조한 막걸리의 발효 중의 이화학적 특성과 항균활성을 조사하였고 발효 과정 중 항균활성이 있는 미생물을 동정하였다. 발효 3일째 pH 결과는 누룩군이 입국군에 비해서 낮았다. 그러나 산도와 알코올의 함량은 발효 15일째에서 누룩군이 입국군에 비해서 유의적으로 높았다. 총당과 총균수는 입국으로 만든 막걸리가 누룩으로 만든 막걸리보다 더 높게 나타났다. 관능검사 평가 결과, 색, 단맛, 향, 목넘김, 전반적 기호도는 입국군(DKB)이 가장 우수하게 나타났다. 항균활성 결과 누룩 샘플 GND, ANF에서 Salmonella enterica, Bacillus subtilis, Escherichia coli, Bacillus cereus에서 항균력이 나타난 미생물을 동정하였다. 균주 ST-1은 GND에서 분리하여 16S rRNA 염기서열에 기초하여 동정한 결과 Paenibacillus polymyxa strain RCP6과 99%의 상동성을 보였다. 따라서 P. polymyxa ST-1은 항진균활성과 항세균활성을 가진 bacteriocin-like substances를 생산함을 알 수 있고 이와 같은 새로운 항미생물 물질은 천연식품보존제 및 사료보존제뿐만 아니라 항생제 대체 의약품으로도 활용이 기대되며, 이를 위하여 향후 이 물질들의 보다 정확한 구조 및 특성을 규명하는 연구가 필요하다.

PI(Power Integrity)를 이용한 EMI 개선

  • 이석연;정기현
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2008년도 하계종합학술대회
    • /
    • pp.1195-1196
    • /
    • 2008
  • It is difficult to solve PCB(Printed Circuit Board) Noise problem. Because Electronic circuit system operates very high frequency. Resonance analysis of PCB layout by PI(Power Integrity) Simulation method visualizes distribution of Switching noise between VDD and GND. By using de-cap, we reduce impedance and solve the EMI problems.

  • PDF

Ku-Band용 위성 배열 안테나 설계 및 제작 (The Design and Fabrication of Satellite Array Antenna for Ku-Band)

  • 이한영
    • 전기학회논문지
    • /
    • 제61권11호
    • /
    • pp.1668-1670
    • /
    • 2012
  • In this paper, a satellite array antenna operates at 12.2GHz~12.75GHz was designed and fabricated. The lowest height and high gain electrical beam tilt was obtained by applying backed slot and sub-reflector widening the distance between the patch and the GND. The simulation and measurement showed good agreements, the electrical beam tilt was $10^{\circ}$, the gain was 26.5dBi, the VSWR was less than 3:1 and the return loss was less than -15dB.

입력-결합 전류 제한 링 발진기와 하드웨어 효율적인 레벨 시프터를 적용한 저전력 안테나 스위치 컨트롤러 IC (A Low Power Antenna Switch Controller IC Adopting Input-coupled Current Starved Ring Oscillator and Hardware Efficient Level Shifter)

  • 임동구
    • 전자공학회논문지
    • /
    • 제50권1호
    • /
    • pp.180-184
    • /
    • 2013
  • 이 논문에서는 (SOI) CMOS 공정을 이용한 저전력 안테나 스위치 컨트롤러 IC가 설계되었다. 제안 된 컨트롤러는 전력 수용능력과 고조파 왜곡 성능을 향상시키기 위하여 입력 신호에 따라 안테나 스위치를 구성하는 FET소자의 게이트 단자와 바디 단자에 +VDD, GND 그리고 -VDD에 해당하는 3 가지 상태의 로직 레벨을 제공한다. 또한, 입력-결합 전류제한 링 발진기와 하드웨어 효율적인 레벨 시프터를 적용함으로서 전력소모와 하드웨어 복잡도를 크게 감소시켰다. 제안 된 회로는 +2.5 V 전원을 공급받으며 송신 모드에서 135 ${\mu}A$를 소모하며 10 ${\mu}s$의 빠른 start-up 시간을 달성하였고, 전체 면적은 $1.3mm{\times}0.5mm$로 설계되었다.

마이크로웨이브 수신기용 광대역 RF 증폭기 설계 및 제작 (Design and Implementation of Broadband RF Amplifier for Microwave Receiver)

  • 김재현;윤인섭;고민호;박효달
    • 한국전자통신학회논문지
    • /
    • 제10권6호
    • /
    • pp.665-670
    • /
    • 2015
  • 본 논문은 마이크로웨이브 수신기 구성을 위한 광대역 RF 증폭기를 설계 및 제작하였다. 제안한 광대역 RF 증폭기는 수신된 신호의 안정적인 증폭을 위하여 소스단자에 연결되는 비아까지 EM설계를 하였으며, 능동소자의 소오스(Source) 측이 이상적인 접지(GND)로 동작함에 따라 발진하는 요소를 최소화 하여 광대역에서 일정한 이득 특성 및 안정적인 증폭특성을 얻도록 하였다. 상용 GaAs FET를 사용하고, 광대역 마이크로웨이브 수신기의 IF 주파수 대역인 720 MHz, 4,595 MHz와 6,035 MHz에서 동작하도록 입력 및 출력 정합회로를 구성하였다. 제작 및 측정결과 500 MHz ~ 7 GHz의 광대역 특성을 나타내었으며, 전압이득은 737.5 MHz에서 6.0575 GHz까지 10.635 dB ~ 13.129 dB, 기본파와 제2차 고조파 사이에서 20 dBc 이상의 고조파 억압특성을 나타내었다.

플라이백 컨버터를 이용한 조명용 LED Driver의 모듈화 연구 (A Study on the Modularization of LED Driver for Illumination Using a Fly-Back Converter)

  • 최진봉;김관우;정영국;임영철
    • 전력전자학회논문지
    • /
    • 제14권6호
    • /
    • pp.504-513
    • /
    • 2009
  • 본 논문에서는 조명용 LED 구동 장치를 위한 새로운 방식의 LED 구동 모듈화 방법을 제안한다. 제안된 LED 구동 회로는 플라이백 컨버터를 이용하여 교류 입력 전원의 핫 접지와 LED 구동부의 콜드 접지를 절연한다. LED 전류 제어를 용이하게 하기위해 플라이백 컨버터를 동특성이 뛰어난 불연속 모드로 동작시키고, KIA2431을 이용하여 귀환 루프 제어를 한 후, 그에 대한 특성을 파악한다. 제안된 LED 구동 모듈은 폭넓은 교류 전원 입력 범위와 PWM 제어 IC를 직접 제어하여 버스트 디밍을 구현하고 넓은 범위의 LED 밝기 조절이 가능하게 하였다. 본 논문에서는 제안된 LED 구동 모듈에 대한 동작 원리를 설명하고 LED 구동 모듈을 실제로 구현 및 적용하여 제안된 구동 모듈의 유용성을 입증하였다. 또한, 소형화와 모듈화 된 LED 구동 모듈을 병렬로 연결한 다 채널 LED 구동 장치를 제안하고 그 타당성을 검증하였다.

A Validated Solution for the Threat of Ionosphere Spatial Anomalies to Ground Based Augmentation System Users

  • Pullen, Sam;Lee, Ji-Yun;Datta-Barua, Seebany;Park, Young-Shin;Zhang, Godwin;Enge, Per
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
    • /
    • pp.9-14
    • /
    • 2006
  • This paper develops a complete methodology for the mitigation of ionosphere spatial anomalies by GBAS systems fielded in the Conterminous U.S. (CONUS). It defines an ionosphere anomaly threat model based on validated observations of unusual ionosphere events in CONUS impacting GBAS sites in the form of a linear ‘wave front’ of constant slope and velocity. It then develops a simulation-based methodology for selecting the worst-case ionosphere wave front impact impacting two satellites simultaneously for a given GBAS site and satellite geometry, taking into account the mitigating effects of code-carrier divergence monitoring within the GBAS ground station. The resulting maximum ionosphere error in vertical position (MIEV) is calculated and compared to a unique vertical alert limit, or $VAL_{H2,I}$, that applies to the special situation of worst-case ionosphere gradients. If MIEV exceeds $VAL_{H2,I}$ for one or more otherwise-usable subset geometries (i.e., geometries for which the 'normal' vertical protection level, or $VPL_{H0}$, is less than the 'normal' VAL), the broadcast ${\sigma}_{pr_{-}gnd}$ and/or ${\sigma}_{vig}$ must be increased such that all such potentially-threatening geometries have VPL$_{H0}$ > VAL and thus become unavailable. In addition to surveying all aspects of the methods used to generate the required ${\sigma}_{pr_{-}gnd}$ and ${\sigma}_{vig}$ inflation factors for CONUS GBAS sites, related methods for deriving similar results for GBAS sites outside CONUS are suggested.

  • PDF

Microbiological Composition and Sensory Characterization Analysis of Fermented Sausage Using Strains Isolated from Korean Fermented Foods

  • Jeong, Chang-Hwan;Lee, Sol-Hee;Kim, Hack-Youn
    • 한국축산식품학회지
    • /
    • 제42권6호
    • /
    • pp.928-941
    • /
    • 2022
  • This study aimed to analyze the microbiological composition and sensory characterization of fermented sausage using strains isolated from Kimchi (GK1, Pediococcus pentosaceus SMFM2016-GK1; NK3, P. pentosaceus SMFM2016-NK3), Doenjang (D1, Debaryomyces hansenii SMFM2021-D1), and spontaneously fermented sausage (S8, D. hansenii SMFM2021-S8; S6, Penicillium nalgiovense SMFM2021-S6). The control was commercial starter culture. Nine treatments were applied [GD (GK1+D1), GS (GK1+S8), GDS (GK1+D1+S8), ND (NK3+D1), NS (NK3+S8), NDS (NK3+D1+S8), GND (GK1+NK3+D1), GNS (GK1+NK3+S8), and GNDS (GK1+NK3+D1+S8)] by mixing lactic acid bacteria and yeast, and S6 was sprayed. The microbial composition of fermented sausage was analyzed [aerobic bacteria (AC), Lactobacillus spp. (LABC), Staphylococcus spp. (STPC), and yeast and mold (YMC)], and pH and electronic nose and tongue measurements were taken. The AC, LABC, STPC, and YMC values of the control and treatment groups tended to increase during fermentation (p>0.05). The STPC values of the GD, GS, ND, and GDS groups were similar to that of the control on day 3. The pH of the control on day 3 was significantly lower than that of the GD, ND, and GND groups (p<0.05). Higher levels of 4-methylpentanol, 2-furanmethanol, and propyl nonanoate, which provide a "fermented" flavor, were detected in the GD group compared to in the control and other treatment groups. GD and ND groups showed higher umami values than the control and other treatment groups. Therefore, it is expected that GD can be valuable as a starter culture unique to Korea when manufacturing fermented sausage.

LPF 내장형 7중 대역 LTCC 프런트엔드모듈 설계 (Design of 7 band LTCC Front-end module embedded LPF)

  • 김형은;서영광;김인배;문제도;이문규
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2011년도 제42회 하계학술대회
    • /
    • pp.1660-1661
    • /
    • 2011
  • 본 논문에서는 7중 대역 (GSM850, GSM900, DCS1800, PCS1900, UMTS850, UMTS1900, UMTS2100) 을 지원하는 LPF 내장형 LTCC 프런트 엔드 모듈 (FEM) 을 설계, 제작 및 측정하였다. 제작된 FEM은 효과적인 고조파 제거를 위해 수동소자를 LTCC 기판에 내장하여 저역 통과 필터(LPF)를 구현하였다. 본 논문에서 제안하는 FEM은 송수신 신호를 선택하기 위한 flip-chip 형태의 CMOS RF SP9T switch, Rx 신호의 수신을 위한 dual type의 SAW filter, 매칭 및 ESD 보호 회로를 위한 0603 크기의 칩소자가 부품 외부에 실장되어 구현된다. 전체 크기는 $4.5{\times}3.2{\times}1.2\;mm^3$의 초소형으로 내부 GND 2개 층을 포함하여 총 16층으로 구성된다. 측정결과는 송신단과 수신단의 삽입손실이 각각 1.7 dB, 3.6 dB 이하의 우수한 특성을 보였다.

  • PDF

모바일 디바이스를 위한 고밀도 어댑터 개발 동향

  • 최성욱;조규민;최영운;이선경;이종달;오동성;이효범
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2011년도 전력전자학술대회
    • /
    • pp.310-311
    • /
    • 2011
  • 기존의 모바일 디바이스용 AC/DC 어댑터는 단순한 밧데리 충전기로서 기능적인 측면보다는 가격적인 측면의 접근이 많이 이루어졌다. 하지만 최근 스마트폰과 타블렛 PC 같은 다양한 모바일 디바이스의 출현으로 출력단 GND 잡음 및 누설전류에 대한 새로운 사양들이 대두되고 있다. 더불어 하나의 어댑터를 이용하여 여러 디바이스에 대응하기 위한 새로운 어댑터에 대한 요구가 커지고 있다. 본 논문에서는 AC/DC 어댑터의 새롭게 요구되는 사양들에 대해 간략히 살펴보고 기술적 문제점에 대해 기술하였다.

  • PDF