고분자계 치아 수복용 복합재에서 2,2-bis[4-(2-hydroxy-3-methacryloyloxy propoxy) phenyl] propane(Bis-GMA) 70 wt%와 희석제인 triethylene glycol dimethacrylate(TEGDMA)가 30 wt% 포함된 혼합물이 레진 기질로 사용되고 있다. Bis-GMA의 높은 점도로 인해 첨가되는 TEGDMA는 수복재의 높은 경화 수축과 물성 저하의 원인이 된다. 본 연구에서는 TEGDMA 첨가량을 감소시켜 우수한 특성을 나타내는 수복재를 제조하기 위해 저점도 Bis-GMA 유도체들을 이용하여 새로운 치과용 수복재를 제조하였다. 히드록실기를 포함하지 않는 Bis-GMA 유도체들의 경화 특성은 Bis-GMA와 비슷하였지만 이들의 흡습성과 점도는 Bis-GMA에 비해 크게 낮았다. Bis-GMA 유도체를 포함한 수복재를 제조하여 경화 수축률, 흡습성, 기계적 물성을 실험한 결과 기존 상업적으로 사용되는 수복재보다 낮은 흡습성과 탁월한 물성을 나타내었고, 경화 수축률도 약 25% 감소하였다.
E-beam 전조사법을 이용하여 HPP-g-GMA 공중합체와 아민화 반응을 통한 아민화 HPP-g-GMA 이온교환체를 합성하였다. 그라프트율은 GMA 단량체 농도가 증가함에 따라 증가하였으며 GMA 단량체 농도가 1.46 M에서 그라프트율이 130%로 최대를 나타냈다. 아민화율은 그라프트율이 증가함에 따라 증가하는 경향을 나타내었으며, 그라프트율이 100%일 때 37.4%로 최대값을 나타내었다. 아민화 HPP-g-GMA 섬유이온교환체의 이온교환용량은 약 3.78 meq/g으로써 흡착 성능이 매우 우수한 소재임을 확인하였다. BET 분석결과 아민화 HPP-g-GMA의 비표면적은 54.83 $\m^2/g$, 기공크기는 $26\AA$으로 반응전보다 비표면적은 감소하였고 기공크기는 약간 증가하는 경향을 보였다. 또한 SEM 분석 결과, 반응 후 섬유의 두께가 굵어짐을 관찰하였으며 기공 막힘현상이 관찰되지 않았으며 이로부터 본 연구에서 합성한 섬유이온교환체가 음이온 흡착.분리에 적합함을 확인하였다.
연구목적: 치과용 접착제에서 기저단량체로 사용되는 Bis-GMA를 Bis-M-GMA로 대체한 접착레진이, Bis-GMA/TEGDMA 를 사용한 접착제와 비교할 만한 물성과 접착강도를 가지는지 알아보고자 하였다. 연구 재료 및 방법: 다양한 구성비의 Bis-GMA, Bis-M-GMA 및 TEGDMA 를 함유한 접착레진을 제작하여, 점도(${\eta}$), 중합률(DC) 및 굴곡강도(FS)를 측정하고, 상아질에 대한 미세인장접착강도(MTBS)를 측정하였다. 해석을 위해 각 단량체들의 용해도 상수(${\delta}_t$)를 비교하였고, 접착계면을 주사전자현미경으로 관찰하였다. 결과: Bis-M-GMA의 점도는 3.65 Pa s로 크게 감소하였다. Bis-GMA를 함유하지 않는 접착레진은 Bis-GMA를 함유한 접착레진에 비해 낮은 굴곡강도를 보였다(p < 0.05). TEGDMA 함량이 낮은 접착레진은 TEGDMA 함량이 높은 접착레진에 비해 낮은 미세인장접착강도를 보였으며(p < 0.05), 주사전자현미경 사진에서 균열이나 틈이 관찰되었다. 결론: 높은 접착강도를 얻기 위해서는 접착레진의 높은 굴곡강도와 초기 중합률 뿐 아니라, 접착레진과 primer 처리 된 상아질 사이의 용해도 상수의 적합성도 요구되었다.
The core/shell type structure of the highly crosslinked poly(glycidylmetharylate-co-divinylbenzene) microspheres prepared in the precipitation polymerization in acetonitrile was thoroughly verified by means of swelling, $^1H$ NMR, XPS, TEM and TGA measurements. In the XPS measurement, the higher the GMA content, the higher the oxygen content was observed, implying that the higher content of GMA is observed in the particle surface. The further verification of the core/shell structure of the poly(GMA-co-DVB) particles was carried out using $^1H$ NMR and TEM techniques, resulting in the poly(GMA-co-DVB) particles with the GMA rich-phase and DVB rich-phase. In overall, the poly(GMA-co-DVB) microspheres consist of a highly crosslinked DVB rich-phase in the core and slightly or non-crosslinked GMA rich-phase in the shell part due to the different reaction ratios between two monomers and self-crosslinking density of DVB.
In this work, the effect of glycidyl methacrylate grafted multi-walled carbon nanotubes (GMA-MWCNTs) on the viscoelastic behaviors of polypropylene (PP) based nanocomposites was studied. The GMA-MWCNTs/PP was prepared using a bravender at $200^{\circ}C$ by melt mixing as a function of GMA-MWCNT content. The viscoelastic behaviors of GMA-MWCNTs/PP nanocomposites were measured by a rheometer. It was found that the GMA-MWCNTs were homogeneously dispersed in the PP matrix. The GMA-MWCNTs/PP nanocomposites showed higher storage modulus, loss modulus, and shear viscosity compared to pure PP nanocomposites and the maximum value was shown at 2.0 wt% GMA-MWCNTs loading. These results were probably attributed to the strong interfacial interaction between the GMA-MWCNT and the PP matrix.
높은 용융강도가 요구되는 용도로 사용하기 위하여, 기능성 단량체인 glycidyl methacrylate(GMA)가 첨가된 poly(lactic acid)(PLA)를 전자선 조사로 개질하였다. GMA의 양과 전자선량을 조절하여 다양하게 개질된 PLA를 제조한 후 열적 특성, 용융 점탄성 성질 및 겔화도를 조사하였다. GMA를 첨가하지 않고 전자선 조사로만 개질한 PLA의 복합점도와 저장 탄성률은 원래의 PLA의 값보다 더 낮았고 조사량이 증가하면 더욱 낮아졌다. GMA을 0.1 phr 또는 0.3 phr로 첨가하여 개질한 PLA의 물성의 조사량에 따른 변화 경향은 GMA를 첨가하지 않고 개질한 PLA와 비슷하지만, 0.5 phr GMA를 함유하며 전자선 조사량 5 kGy로 개질된 PLA는 원래의 PLA보다 낮은 주파수 영역에서 3배나 큰 복합점도와 10배나 큰 저장탄성률을 보였다.
본 연구에서는 실리카 나노입자를 dipodal 형태의 bis[3-(trimethoxysilyl)propyl]amine(BTMA) 실란 커플링제로 실리카 표면을 개질한 후, glycidyl methacrylate(GMA)로 표면 처리를 하여 실리카에 결합된 BTMA의 N-H기와 GMA의 epoxide기의 개환 반응에 의하여 실리카 표면에 중합용 methacrylate기를 도입하는 연구를 수행하였다. 반응시간, 반응온도 및 투입하는 GMA의 농도 변화가 BTMA의 N-H기와 GMA의 epoxide기 사이의 반응에 미치는 영향을 Fourier transform infrared spectroscopy(FTIR), elemental analysis(EA) 및 고체상태 $^{13}C$ cross-polarization magic angle spinning(CP/MAS), nuclear magnetic resonance spectroscopy(NMR)법을 사용하여 분석하였다. BTMA로 개질된 실리카를 GMA로 처리하면 실리카 입자에 결합되어 있는 BTMA의 N-H기와 GMA의 epoxide기가 열리면서 상호 반응이 일어났으며, 실험한 조건에서는 반응시간, 반응온도 및 투입하는 GMA 농도가 증가할수록 실리카 표면에 도입되는 methacrylate기가 증가함을 확인하였다.
상업적으로 이용되는 고분자계 치과용 수복재의 문제점인 중합시 나타나는 부피 수축을 감소시키기 위해 (2,2-비스[4-(2-하이드록시-3-메타크릴로일옥시프로폭시)페닐] 프로판) (bis-GMA), 유도체인 (2,2-비스[3-메틸, 4-(2-하이드록시-3-메타크릴로일옥시프로폭시)페닐] 프로판) (DMBis-GMA)와 (2,2-비스[3,5-디메틸, 4-(2-하이드록시-3-메타크릴로일옥시프로폭시)페닐] 프로판) (TMBis-GMA)를 합성하고 이를 희석제, 스파이로 오쏘카보네이트, 무기 충진재와 혼합하여 새로운 고분자계 치과용 수복재를 제조하였다. Bis-GMA 유도체/Bis-GMA 유도체/희석제 혼합계들 중에서 Bis-GMA/TMBis-GMA/TEGDMA 계의 중합 수축률이 가장 작았다. 이혼합계에 스파이로 오쏘카보네이트를 첨가함으로써 중합 수축률은 더욱 감소하였다. 최소의 중합 수축률을 나타내는 레진 단량체 혼합물을 사용하여 치과용 수복재를 제조한 결과 중합 수축률은 $0.7\%$로 기존 수복재의 중합 수축률 $2.5\%$에 비해 크게 감소하였다. 또 수복재의 기계적 강도는 기존 소재와 비슷하였지만 중합이 완료되는데 필요한 시간은 지연되었다.
The use of Zn coated steel has increased in the automotive industry due to its excellent corrosion resistance. Conventionally the BIW(body-in-white) structure and the hang-on parts have been made of Zn coated steel and more recently Zn coated steel began to be applied in the chassis parts. During gas metal arc (GMA) welding of the chassis part, lap fillet joint used to be adopted but spatter generation and porosities are most important concerns. In the industrial applications, an intentional joint gap was made to avoid the weld defects but it is not easy to control the size of joint gap. In this research, gas tungsten arc (GTA) is combined with GMA welding where GTA precedes GMA. As pulsed arc was adopted as GMA, GTA was oscillated along the longitudinal direction by pulsing GMA, but the arc oscillation did not disturb the molten droplet transfer of GMA welding. By increasing the distance between GTA and GMA, the length of weld pool increased and porosity could be reduced. Moreover porosity in the welds was fully removed when the distance between two arcs was 15 mm.
리튬이온 이차전지에는 폴리에틸렌 격리막이 주로 사용되어 오고 있다. 전지의 고온 안정성 확보를 위해서는 폴리에틸렌 격리막보다 높은 멜트다운(melt down) 온도를 갖는 격리막이 요구된다. 이를 위해 폴리에틸렌 격리막을 단량체인 2,2-bis[4-(2-hydroxy-3-methacryloyloxypropoxy)phenyl]propane(bis-GMA) 혹은 이의 유도체들로 코팅하고 이를 라디칼 중합반응시켰다. 점도가 높은 bis-GMA를 사용한 경우에는 라디칼 중합반응이 진행되지 않은 반면 점도가 낮은 bis-GMA 유도체를 사용한 경우에는 라디칼 중합반응이 진행되었다. 적절한 함량의 bis-GMA 유도체를 포함한 반응액으로 격리막을 코팅하고 이를 중합반응시켜 격리막을 제조한 결과, 격리막의 통기도 감소없이 멜트다운 온도를 $160^{\circ}C$까지 향상시킬 수 있었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.