• Spatial Information Research
• /
• v.22 no.5
• /
• pp.53-63
• /
• 2014

As recent interest in ecological resources increases, an effort in three-dimensional visualization of the ecological resources has increased for the restoration and preservation of the natural environment as well as the evaluation of the landscape. However, in the case of forest resources, information extraction has been active, but the effort in trying to apply that information into an effective visualization has not happened. In other words, the effort for effective visualization is lacking when it comes to the visualization of forest resources, and numerous cases are ether non-realistic or the simulation required for analysis is inappropriate. Therefore, this paper extracts information through the use of airborne LiDAR data, aerial photograph, and forest type maps to create a vegetation layer, and then uses Flora3D forest modeling tools and ArcGlobe to accurately visualize the vegetation layer into the three dimension. An effective application for restoration and preservation of ecological resources as well as analysis on the urban landscape can be considered as a result of intuitively and realistically enabling the user's awareness of forest information within the Geographic Information System.

• Advances in Traditional Medicine
• /
• v.3 no.3
• /
• pp.111-122
• /
• 2003

Plants of the genus Hypericum (Family - Hypericaceae) are herbs, shrubs or small trees and are distributed chiefly in the temperate regions of the world. About 400 different species of Hypericum are available throughout the globe and 20 species occur in India, including a few cultivated in gardens. Almost all plants of the genus Hypericum are widely used in folk medicine. Several potent phytoconstituents from different Hypericum species have led to the isolation of antibacterial, antifungal and cytotoxic compounds. With the development of resistance and cross resistance with different microorganisms and the evolution of so many deadly diseases the screening and evaluation of the phytoconstituents so much so the development of varied phytoconstituents for the drug development for these deadly diseases is utmost essential in every aspects. The present review on the antimicrobial use of different Hypericum reports the findings from and extensive literature search on the Hypericum species around the globe that have been assessed for antimicrobial and antiviral activity. An attempt has been made through this review to summarize the information in this aspect in order to highlight the promising species of this genus which are worthy for further investigation as leads for drug development. Over 31 different Hypericum species have been reported to possess such activities with their varied number of phytoconstituents. Sixteen different constituents of six different classes of phytoconstituents have been reported to be present in different varieties of Hypericum, which may be considered responsible for this activity.

• Journal of Energy Engineering
• /
• v.24 no.1
• /
• pp.78-87
• /
• 2015

Focusing effect of a metallic layer in a severe accident depending on the aspect ratios and cooling conditions of top plate and side wall was investigated. Experiments were carried out for Rayleigh numbers and aspect ratio in the range of $8.49{\times}10^7{\sim}5.43{\times}10^9$, 0.135~0.541 respectively. In order to achieve high Rayleigh numbers, the heat transfer experiments were replaced by mass transfer experiments based on the heat and mass transfer analogy. A sulfuric acid-copper sulfate ($H_2SO4-CuSO_4$) electroplating system was adopted as the mass transfer system. The experimental results agreed well with the Rayleigh-Benard natural convection correlations of Dropkin and Somerscales and Globe and Dropkin. When compared with the standard Rayleigh-Benard problem, the cooling by the side wall is even higher than the top. For a shorter height, the interaction between the heated and cooled plumes increases due to decrease of the height. Thus, the heat transfer increases.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.387-392
• /
• 2020

This paper proposes a flow-rate control system for industrial valves. Industrial valves are used in piping systems to control the flow rate and pressure. In general, valves used in pipelines are classified into globe valves, butterfly valves, and ball valves according to the shape. Motor, hydraulic, and pneumatic systems are used for operating valves. The flow meter should measure the flow rate when configuring the flow-rate control system. On the other hand, because the flow rate of the valve can be expressed by flow coefficient, a control scheme is proposed using the pressure deviation, which measures at the front and rear of the valve. The transfer function for the valve, according to the control input, was estimated using the signal compression method. Based on the induced transfer function, the disturbance observer was designed to improve the command following the performance of the valve stem. The performance of the proposed control method is compared with the flow-rate control result using the flow meter used.

• Journal of Biomedical Engineering Research
• /
• v.27 no.5
• /
• pp.250-259
• /
• 2006

The information of eye movement is used in various fields such as psychology, ophthalmology, physiology, rehabilitation medicine, web design, HMI(human-machine interface), and so on. Various devices to detect the eye movement have been developed but they are too expensive. The general methods of eye movement tracking are EOG(electro-oculograph), Purkinje image tracker, scleral search coil technique, and video-oculograph(VOG). The purpose of this study is to embody the algorithm which tracks the location of the gazing point at a pupil. Two kinds of location data were compared to track the gazing point. One is the reference points(infrared LEDs) which is effected from the globe. Another is the center point of the pupil which is gained with a CCD camera. The reference point was captured with the CCD camera and infrared lights which were not recognized by human eyes. Both of images which were thrown and were not thrown an infrared light on the globe were captured and saved. The reflected reference points were detected with the brightness difference between the two saved images. In conclusion, the circumcenter theory of a triangle was used to look for the center of the pupil. The location of the gazing point was relatively indicated with the each center of the pupil and the reference point.

• Korean Journal of Agricultural Science
• /
• v.46 no.1
• /
• pp.45-56
• /
• 2019

As a result of analyzing the quality of imported grapes during the 2018 season, the hardness of the grape berry was found to be 10 N or less in total. In the case of Chilean grapes, the soluble solids tended to be lower as imports and distribution periods were delayed. The berry weight was the largest at 14.4 - 14.8 g for the 'Red Globe', 7.1 - 7.4 g for the 'Thompson Seedless' and 6.0 - 7.0 g for the 'Crimson Seedless'. The 'Crimson Seedless' grapes imported from Chile, which had a high berry shatter rate, had a shorter pedicel length, pad width and brush length than that of the other 2 varieties. Regardless of the grape varieties, the weight loss during the distribution at room temperature ($25^{\circ}C$) increased rapidly as the import season was delayed. Additionally, it was found that the later the distribution seasons, a higher stem browning index was observed regardless of the variety. The 'Thompson Seedless' was revealed to be more susceptible to browning than that of the other varieties. The shrinkage of the stem and the pedicel browning progressed within a short time during shelf-life as the distribution time was delayed. The incidence of berry decay of the imported grapes tended to increase with the progression of the distribution period. In the fruits distributed on April, except for the 'Crimson Seedless', the grapes were rapidly corrupted in the second half of the distribution. The 'Red Globe' grapes completely lost marketability due to a berry decay of 26.1% and 69.9% at 9 and 12 days after shelf-life, respectively.

• Journal of the Korean earth science society
• /
• v.43 no.6
• /
• pp.712-736
• /
• 2022

To understand the characteristics of low-level clouds (CLs), environmental variables are composited on each CL using individual surface observations and six-hourly upper-air meteorologies around the globe. Individual CLs has its own distinct environmental conditions. Over the eastern subtropical and western North Pacific Ocean in JJA, stratocumulus (CL5) has a colder sea surface temperature (SST), stronger and lower inversion, and more low-level cloud amount (LCA) than the climatology whereas cumulus (CL12) has the opposite characteristics. Over the eastern subtropical Pacific, CL5 and CL12 are influenced by cold and warm advection within the PBL, respectively but have similar cold advection over the western North Pacific. This indicates that the fundamental physical process distinguishing CL5 and CL12 is not the horizontal temperature advection but the interaction with the underlying sea surface, i.e., the deepening-decoupling of PBL and the positive feedback between shortwave radiation and SST. Over the western North Pacific during JJA, sky-obscuring fog (CL11), no low-level cloud (CL0), and fair weather stratus (CL6) are associated with anomalous warm advection, surface-based inversion, mean upward flow, and moist mid-troposphere with the strongest anomalies for CL11 followed by CL0. Over the western North Pacific during DJF, bad weather stratus (CL7) occurs in the warm front of the extratropical cyclone with anomalous upward flow while cumulonimbus (CL39) occurs on the rear side of the cold front with anomalous downward flow. Over the tropical oceans, CL7 has strong positive (negative) anomalies of temperature in the upper troposphere (PBL), relative humidity, and surface wind speed in association with the mesoscale convective system while CL12 has the opposite anomalies and CL39 is in between.

• Safety and Health at Work
• /
• v.14 no.3
• /
• pp.325-331
• /
• 2023

Background: Heat stress is a harmful physical hazard in many occupational settings. However, consequences of occupational heat exposure among workers in a sugarcane factory in Ethiopia are not well characterized. This study aimed to assess the level of occupational heat exposure-related symptoms and contributing factors. Methods: In this cross-sectional study, five workstations were selected for temperature measurement. Heat stress levels were measured using a wet-bulb globe temperature index meter. A stratified random sampling technique was used to select 1,524 participants. Heat-related symptoms were assessed using validated questionnaires. Results: The level of occupational heat exposure was 72.4% (95% CI: 70.2%-74.8%), while 71.6% (95% CI: 69.3%-74.9%) of participants experienced at least one symptom related to heat stress. The most common heat-related symptoms were swelling of hands and feet (78%), severe thirst (77.8%) and dry mouth (77.4%). The identified risk factors were a lack of reflective shields (AOR: 2.20, 95% CI: 1.53, 3.17), not-enclosed extreme heat sources (AOR: 1.76, 95% CI: 1.23, 2.51), a lack of access to shade (AOR: 9.62, 95% CI: 6.20, 14.92), and inappropriate protective clothing provision (AOR: 1.58, 95% CI: 1.27, 2.71). Conclusions: The burden of occupational heat exposure and heat-induced symptoms was high. Lack of reflective shields, the absence of enclosed extreme heat sources, a lack of access to shade, and inappropriate protective clothing provision were considerable attributes of heat stress. Therefore, the use of mechanical solutions to stop heat emissions at their sources and the key factors identified were areas for future intervention.

• Archives of Craniofacial Surgery
• /
• v.25 no.4
• /
• pp.161-170
• /
• 2024

Background: The eyes are the central aesthetic unit of the face. Maxillofacial trauma can alter facial proportions and affect visual function with varying degrees of severity. Conventional approaches to reconstruction have numerous limitations, making the process challenging. The primary objective of this study was to evaluate the application of three-dimensional (3D) navigation in complex unilateral orbital reconstruction. Methods: A prospective cohort study was conducted over 19 months (January 2020 to July 2021), with consecutive enrollment of 12 patients who met the inclusion criteria. Each patient was followed for a minimum period of 6 months. The principal investigator carried out a comparative analysis of several factors, including fracture morphology, orbital volume, globe projection, diplopia, facial morphic changes, lid retraction, and infraorbital nerve hypoesthesia. Results: Nine patients had impure orbital fractures, while the remainder had pure fractures. The median orbital volume on the normal side (30.12 cm³; interquartile range [IQR], 28.45-30.64) was comparable to that of the reconstructed orbit (29.67 cm³; IQR, 27.92-31.52). Diplopia improved significantly (T(10)= 2.667, p= 0.02), although there was no statistically significant improvement in globe projection. Gross symmetry of facial landmarks was achieved, with comparable facial width-to-height ratio and palpebral fissure lengths. Two patients reported infraorbital hypoesthesia at presentation, which persisted at the 6-month follow-up. Additionally, five patients developed lower lid retraction (1-2 mm), and one experienced implant impingement at the infraorbital border. Conclusion: Our study provides level II evidence supporting the use of 3D navigation to improve surgical outcomes in complex orbital reconstruction.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2902-2909
• /
• 2011

Regional torrential rains in summer this year due to abnormal climate changes compared to last year, have been frequent. Since Typhoon Rusa and Typhoon Maemi resulted in major damage to railroad facilities in 2002 and 2003 consecutively, problems with abnormal climate changes became a global problem including railroad and floods and droughts around the globe, heavy snow and winter warming have been repeated until now. Serious problem of radiation leakage in Fukushima nuclear power plant by the Tsunami due to 9.0-scale earthquake, this year in March, in northeastern Japan happened, and has given an impact on the life of Japanese citizens and industries and has also influenced on Korean. This shows how important to secure and to protect major national facilities including railroad structures to natural disasters such as earthquake. Therefore, we will briefly discuss about technologies for securing and protecting railroad structures to earthquakes, floods and other natural disasters.