• Journal of Mechanical Science and Technology
• /
• v.14 no.7
• /
• pp.744-751
• /
• 2000

To achieve lower flying height for high areal recording density, the laser zone texturing of the disk needs to be designed to reduce glide height. One problem of the laser bump design is that the regular laser bump pattern often produces glide resonance phenomenon, which leads to failure of the glide height test. However, it was found in this study that glide resonance is an intrinsic problem of the glide head used and resonance phenomenon depends on the type of the head slider, that is, the natural frequency of the slider body. Therefore, higher glide height or glide failure caused by glide resonance does not lead to head/media interface problem in the real drive operating conditions in which the data head is used. Pseudo-random bump pattern greatly reduces the glide resonance. Smaller bump pitch will also help to reduce the glide resonance. However, as bump spacing becomes smaller, glide height will be increased due to increased air pressure developed around the bumps. Lowering bump height is the most effect way to reduce glide avalanche.

• Journal of Convergence for Information Technology
• /
• v.11 no.2
• /
• pp.82-89
• /
• 2021

The objective of this study is to propose a new Glide Path that dynamically adjusts the risky asset inclusion ratio of the Target Date Fund by simultaneously considering the market's forecast volatility as well as the time of investor retirement, and to compare the investment performance with the traditional Target Date Fund. Forecasts of market volatility utilize historical volatility, time series model GARCH volatility, and the volatility index VKOSPI. The investment performance of the new dynamic Glide Path, which considers stock market volatility has been shown to be excellent during the analysis period from 2003 to 2020. In all three volatility prediction models, Sharpe Ratio, an investment performance indicator, is improved with higher returns and lower risks than traditional static Glide Path, which considers only retirement date. The empirical results of this study present the potential for the utilization of the suggested Glide Path in the Target Date Fund management industry as well as retirees.

• Journal of International Academy of Physical Therapy Research
• /
• v.9 no.3
• /
• pp.1517-1520
• /
• 2018

It has been reported that gastrocnemius tightness and posterior talar glide are crucial factors influencing ankle dorsiflexion. However, the relationship of ankle dorsiflexion and these factors is not identified in previous studies. The purpose of this study was to identify the relationship of ankle dorsiflexion passive range of motion and gastrocnemius tightness and posterior talar glide. Twenty-five male subjects participated in this study. Bilateral weight-bearing ankle dorsiflexion passive range of motion and amount posterior talar glide of participants were measured using an inclinometer. Change in myotendinous junction of medial gastrocnemius was measured using ultrasonography to identify gastrocnemius tightness. Pearson product moment correlations were performed to examine correlations between ankle dorsiflexion passive range of motion and gastrocnemius tightness and posterior talar glide. Present findings revealed significant correlation between ankle dorsiflexion passive range of motion and gastrocnemius tightness (p=0.017, r=0.336). Also, ankle dorsiflexion passive range of motion was correlated with posterior talar glide (p=0.001, r=0.470). The present findings provide experimental evidence for factors influencing weight-bearing ankle dorsiflexion.

• The Journal of the Korean dental association
• /
• v.55 no.10
• /
• pp.688-694
• /
• 2017

Objectives: This preliminary study compared the effects of glide path establishing instruments prior to substantial root canal preparation. Materials and Methods: Glide path was established by enlargement of the 2nd mesiobuccal root canal of Dentalike by using three kinds of glide path preparation nickel-titanium file; PathFile, One G and ProGlider. The pre- and post-instrumented Dentalikes were weighed in the resolution of 1 / 10mg. In addition, after glide path preparation, torque generated during shaping using the WavoOne file was measured. The data were analyzed by one-way ANOVA and Tukey post-hoc test at a significance level of 95%. Results: The ProGlider had the significantly larger amount of reduced weight than other instrument groups (p < 0.05). There was no significant difference between group of glide path preparation with ProGlider and without glide path preparation in maximum torque and total stress generation during the shaping with WaveOne. Conclusions: Glide path preparation instruments may have different efficiency according to their geometries. The Dentalike artificial teeth were revealed to have discrepancies in the size of root canals by microCT examination. It is impossible to make a meaningful judgment of the results due to the reliability or resolution problem of the root canal size of the artificial tooth selected as the standardized tooth.

• The Journal of Korean Physical Therapy
• /
• v.35 no.4
• /
• pp.117-123
• /
• 2023

Purpose: In this study, subjects with femoral anterior glide type were examined to investigate the effects of femoral head anterior glide fixation during active straight leg raise on the strength of the hip flexor in a supine position. Methods: Fifteen subjects participated in this study. All subjects were classified through an evaluation form for femoral anterior glide type (FAGT). The strength of the hip flexor was measured during active straight leg raise test (ASLR test), and compared with and without femoral anterior glide fixation in a supine position. The fixation of the femoral head was achieved as per the therapist's manual guidelines. Paired t-test was applied to compare changes in the strength of the hip flexor according to fixation conditions. The level of statistical significance was set at α=0.05. Results: The strength of the hip flexor was lesser during the ASLR test with fixation compared to without fixation (p=0.007). Conclusion: The strength of the hip flexor decreases with fixation. Results of this study revealed a difference between hip flexor strength, with and without femoral anterior glide fixation during ASLR, in subjects with femoral anterior glide type.

• Restorative Dentistry and Endodontics
• /
• v.37 no.4
• /
• pp.215-219
• /
• 2012

Objectives: The purpose of this study was to investigate the screw-in effect and torque generation depending on the size of glide path during root canal preparation. Materials and Methods: Forty Endo-Training Blocks (REF A 0177, Dentsply Maillefer) were used. They were divided into 4 groups. For groups 1, 2, 3, and 4, the glide path was established with ISO #13 Path File (Dentsply Maillefer), #15 NiTi K-file NITIFLEX (Dentsply Maillefer), modified #16 Path File (equivalent to #18), and #20 NiTi K-file NITIFLEX, respectively. The screw-in force and resultant torque were measured using a custom-made experimental apparatus while canals were instrumented with ProTaper S1 (Dentsply Maillefer) at a constant speed of 300 rpm with an automated pecking motion. A statistical analysis was performed using one-way analysis of variance and the Duncan post hoc comparison test. Results: Group 4 showed lowest screw-in effect ($2.796{\pm}0.134$) among the groups (p < 0.05). Torque was inversely proportional to the glide path of each group. In #20 glide path group, the screw-in effect and torque decreased at the last 1 mm from the apical terminus. However, in the other groups, the decrease of the screw-in effect and torque did not occur in the last 1 mm from the apical terminus. Conclusions: The establishment of a larger glide path before NiTi rotary instrumentation appears to be appropriate for safely shaping the canal. It is recommended to establish #20 glide path with NiTi file when using ProTaper NiTi rotary instruments system safely.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.3
• /
• pp.245-252
• /
• 2012

The purpose of this study was to evaluate the influence of glide path on canal centering ratio after instrumentation with different single file systems; WaveOne and Reciproc. Reciproc R25 (VDW), WaveOne Primary (Dentsply Maillefer) and PathFile #13, 16, 19 (Dentsply Maillefer) were used in this study. In no glide path groups, Reciproc files and WaveOne files used for canal preparation without glide path. In glide path groups, the PathFile were used before canal preparation. Methylene blue dye was introduced into the canal to obtain a clear pre-instrumentation image. Pre-instrumentation images and post-instrumentation images were scanned using Epson Perfection V700 Photo scanner (Epson, Nagano, Japan). Transparencies of post-instrumentation images were changed and superimposed on pre-instrumentation images using Adobe Photoshop CS 3 (Adobe Systems Incorporated, San Jose, CA, USA). The centering ratio was calculated for each instrumented canal using the following formula: CR=|X1-X2|/Y. It was statistically analyzed using two-way ANOVA at 95% confidential level. The centering ratio in glide path groups were significant less than it in no glide path groups at 3, 4, 5 and 6 mm level. Except 1 and 6 mm level, WaveOne groups had significant less centering ration than Reciproc groups. At 6 mm level, there was no significant difference between WaveOne and Reciproc. In the limitation of this study, creation of a previous glide path before reciprocating motion instrumentation in curved canal appears to be appropriate and WaveOne system can be used for preparation of curved canal without severe aberrations.

• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.994-999
• /
• 2011

This paper explains how existing electrical ADU(Antenna Distribution Unit) has been improved into a mechanical ADU. Generally the mechanical ADU has stabilized Glide Path which provides a RF signal to the aircraft for safe landing and it has solved the issue of phase shift and power distribution ratio change which can be occurred during long-term use. Besides it has been certified by Flight check and operating several airports in oversea as well as in korea.

• Restorative Dentistry and Endodontics
• /
• v.40 no.4
• /
• pp.286-289
• /
• 2015

Objectives: The aim was to evaluate dentinal crack formation after root canal preparation with ProTaper Next system (PTN) with and without a glide path. Materials and Methods: Forty-five mesial roots of mandibular first molars were selected. Fifteen teeth were left unprepared and served as controls. The experimental groups consist of mesiobuccal and mesiolingual root canals of remaining 30 teeth, which were divided into 2 groups (n = 15): Group PG/PTN, glide path was created with ProGlider (PG) and then canals were shaped with PTN system; Group PTN, glide path was not prepared and canals were shaped with PTN system only. All roots were sectioned perpendicular to the long axis at 1, 2, 3, 4, 6, and 8 mm from the apex, and the sections were observed under a stereomicroscope. The presence/absence of cracks was recorded. Data were analyzed with chi-square tests with Yates correction. Results: There were no significant differences in crack formation between the PTN with and without glide path preparation. The incidence of cracks observed in PG/PTN and PTN groups was 17.8% and 28.9%, respectively. Conclusions: The creation of a glide path with ProGlider before ProTaper Next rotary system did not influence dentinal crack formation in root canals.

• Restorative Dentistry and Endodontics
• /
• v.45 no.2
• /
• pp.22.1-22.10
• /
• 2020

Objectives: This study investigated the influence of glide path size and operating kinetics on the time to reach the working length and the fracture resistance of Twisted File (TF) and Endostar E3 files. Materials and Methods: A total of 120 mandibular single-rooted premolars were selected. Two methods of kinetic motion (TF adaptive and continuous rotary motion) and file systems (TF and Endostar E3) were employed. The files were used in root canals prepared to apical glide path sizes of 15, 20, and 25. The time taken to reach the working length and the number of canals used before the instrument deformed or fractured were noted. Fractured instruments were examined with scanning electron microscopy. Results: The TF system took significantly more time to reach the working length than the Endostar E3 system. Both systems required significantly more time to reach the working length at the size 15 glide path than at sizes 20 and 25. A greater number of TFs than Endostar E3 files exhibited deformation, and a higher incidence of instrument deformation was observed in adaptive than in continuous rotary motion; more deformation was also observed with the size 15 glide path. One TF was fractured while undergoing adaptive motion. Conclusions: No significant difference was observed between continuous rotary and adaptive motion. The TF system and adaptive motion were associated with a higher incidence of deformation and fracture. Apical glide path sizes of 20 and 25 required significantly less time to reach the working length than size 15.