• Journal of Korea Water Resources Association
• /
• v.31 no.1
• /
• pp.27-34
• /
• 1998

Groundwater simulation model suing GIS and Arc/Info Gridfunctions were used to delineate wellhead protection areas. Groundwater simulation model was developed within Arcview GIS. The model. which integrates the data input and manipulation. Process simulation. and display of the results . was developed by considering time variations of the parameters. The model was applied to the EPA data. The hydraulic distributions from the EPA data and those calculated from groundwater simulation model agree well and zone of influence from EPA data and that calculated suing GRID functions seem to be consistent. The developed model may be an efficient tool to delineate WHPA because it integrates all the processes inside the GIS.

• Journal of Korea Water Resources Association
• /
• v.35 no.3
• /
• pp.321-330
• /
• 2002

This study aims at the analysis of the geomorphological instantaneous unit hydrograph model (GIS-GIUH) with geographic information system for the rainfall-runoff analysis of watershed which is ungaged or doesn't have sufficient hydrologic data. The rainfall-runoff analysis was performed in Wi stream(Dongkok, Koro, Miseung, Byeungchun, Hyoreung, Museung) which is a representative experimental river basin of IHP. In the process of analysis of the GIUH model, developed GIS-GIUH model and Rosso-GIUH model were applied the study basin and computed hydrographs by these models were compared with observed hydrograph. The GiS-GIUH model shows more closely to the observed hydrograph than Rosso-GIUH model in the peak discharge of the hydrograph. For the development of the GIS-GIUH model, Gamma function factor N was given by N=3.25( $R_{B}$/ $R_{A}$)$^{0.126}$ $R_{L}$$^{-0.055}$, which is the relation of the watershed geomorphological factor, K was also obtained as K=1.50( $R_{A}$/( $R_{B}$. $R_{L}$))/$^{0.10}$.(( $L_{{\Omega}}$+ $L_{{\Omega}-1}$)/V)$^{0.37}$. As the results of analysis, it was found that GIS-GIUH model can be applied to an ungaged watersheds.eds.

• Korean Journal of Remote Sensing
• /
• v.11 no.2
• /
• pp.1-16
• /
• 1995

This study is conducted to eveluate the potential of a GIS to assist an application problem. GIS has been applied to rainfall-runoff modeling over Soyang area. Various rainfall-runoff models have been developed over the years. A distributed rainfall-runoff model is selected because it considers the topographic characteristics over the basin. GIS can handle the spatial data to enhance the modeling. GRASS-a public domain GIS S/W-is used for GIS tools. Digital database is generated, including soil map, vegetation map, digital elevation model, basin and subbasin map, and water stream. The inpu data for the model has been generated and manupulated using GIS. The database, model and GIS are integrated for on-line operation. The inflow hydrographs are tested for the flood of Sept., 1990. This shows the promising results even without the calibration.

• Spatial Information Research
• /
• v.23 no.4
• /
• pp.79-89
• /
• 2015

This study aims to design and implement a traffic model that can simulate the traffic behavior on the microscopic level by using the GIS. In the design of the model, the vehicle in the simulation environment recognizes the GIS road centerline data as road network data reflecting number of lanes, speed limit and so on. In addition, the behavior model was designed by dividing functions into the environmental perception model, time headway distribution model, car following model, and lane changing model. The implemented model was applied to Jahamun-road of Jongno-gu district to verify the accuracy of the model. As a result, the simulation results on the Jahamun-road had no great error compared with the actual observation data. In the aspect of usability of model, it is judged that this model will be able to effectively contribute to analysis of amount of carbon emission by traffic, evaluation of traffic flow, plans for location of urban infrastructure and so on.

• Journal of KIBIM
• /
• v.3 no.1
• /
• pp.21-27
• /
• 2013

The purpose of the present study is to suggest the strategy for interoperability between BIM and GIS. For this, we analyzed the interoperability issue including the neutral information model such as CityGML, LandXML, IFC and identified the structure differences as the viewpoint of use-case, object, geometry, property by using UML(Unified Modeling Langauge) and reverse engineering. To solve the interoperability problem between BIM and GIS model which is the neutral GIS format, We proposed the consideration including converter, information mapping filter based on ontology dictionary, automation by using API.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.2006-2008
• /
• 2004

In this paper the imitated electric defect was simulated by insulation particle in the model GIS. This paper studied the distribution of frequency spectrum of the radiated electromagnetic waves using antenna (30-2,000[MHz]) and spectrum analyzer. From results of this study, a new method was introduced for measurement and analysis of the radiated electromagnetic waves in accordance with discharge progress of each defect in the model GIS. It was confirmed that detecting partial discharge and estimating discharge progress can be possible in the model GIS.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.45 no.1
• /
• pp.102-114
• /
• 2003

The objectives of the paper are to evaluate cell based pollutant loadings for different storm events, to monitor the hydrology and water quality of the Baran HP#6 watershed, and to validate AGNPS with the field data. Simplification was made to AGNPS in estimating storm erosivity factors from a triangular rainfall distribution. GIS-AGNPS interface model consists of three subsystems; the input data processor based on a geographic information system. the models. and the post processor Land use patten at the tested watershed was classified from the Landsat TM data using the artificial neural network model that adopts an error back propagation algorithm. AGNPS model parameters were obtained from the GIS databases, and additional parameters calibrated with field data. It was then tested with ungauged conditions. The simulated runoff was reasonably in good agreement as compared with the observed data. And simulated water quality parameters appear to be reasonably comparable to the field data.

• Environmental Engineering Research
• /
• v.14 no.2
• /
• pp.111-119
• /
• 2009

A prototype GIS-based decision support system (DSS) was developed by using a database management system (DBMS), a model management system (MMS), a knowledge-based system (KBS), a graphical user interface (GUI), and a geographical information system (GIS). The method of selecting a dispersion model or a modeling scheme, originally devised by Park and Seok, was developed using our GIS-based DSS. The performances of candidate models or modeling schemes were evaluated by using a single index(statistical score) derived by applying fuzzy inference to statistical measures between the measured and predicted concentrations. The fumigation dispersion model performed better than the models such as industrial source complex short term model(ISCST) and atmospheric dispersion model system(ADMS) for the prediction of the ground level $SO_2$ (1 hr) concentration in a coastal area. However, its coincidence level between actual and calculated values was poor. The neural network models were found to improve the accuracy of predicted ground level $SO_2$ concentration significantly, compared to the fumigation models. The GIS-based DSS may serve as a useful tool for selecting the best prediction model, even for complex terrains.

• Journal of Korea Spatial Information System Society
• /
• v.3 no.1 s.5
• /
• pp.49-62
• /
• 2001

Recently, component-based software has become main trends in designing and developing computer software products. This component-based software has advantage of the interoperability on distributed computing environment and the reusability of pre-developed components. Also, GIS is designed and implemented with this component-based methodology, called Open GIS Component. OGC(OpenGIS Consortium) have announced various implementation and design specification and topic in GIS. In GIS, Spatial analysis functions like network analysis, TIN analysis are very important function and basically, estimate system functionality and performance using this analysis methods. The simple feature geometry specification is announced by OGC to increase the full interoperability of various spatial data. This specification includes just geometry spatial data model. However, in GIS which manages spatial data, not only geometric data but also topological data and various analysis functions have been used. The performance of GIS depends on how this geometric and topological data is managed well and how various spatial analyses are executed efficiently. So it requires integrated spatial data model between geometry and topology and extended data model of topology for spatial analysis, in case network analysis and TIN analysis in open GIS component. In this paper, we design analysis component like network analysis component and TIN analysis component. To manage topological information for spatial analysis in open GIS component, we design extended data model of simple feature geometry for spatial analysis. In addition to, we design the overall system architecture of open GIS component contained this topology model for spatial analysis.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.782-789
• /
• 2010

Landslides cause enormous economic losses and casualties. Korea has mountainous regions and heavy slopes in most parts of the land and has consistently built new roads and large-scale housing complexes according to its industrial and urban growth. As a result, the damage from landslides becomes greater every year. In this study, performed a GIS-based landslide hazard analysis by SINMAP(Stability Index MAPping) model in Gyeonggi Icheon area coupling with geomorphological and geological data. SINMAP model has its theoretical basis in the infinite plane slope stability model with wetness obtained from a topographically based steady state model of hydrology. To Gyeonggi Icheon area landslides hazards evaluated, these SINMAP model were analysed results while simultaneously referring to the stability index map, where lines distinguish the zones categorized into the different stability classes and a table giving summary statistics.