• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.3
• /
• pp.520-529
• /
• 2003

Proper finishing and polishing of tooth restorations enhance the esthetics and the longevity of the restored tooth. The aims of this study were to identify an appropriate polishing system for each esthetic restorative material(Z250, Heliomolar, Dyract AP, Fuji II LC), and to compare the efficiency of polishing systems(Enhance, Sof-Lex, Composite). The control group remains untouched. The results were as follows: 1. There was no significant difference of surface roughness among the materials, while a roughness value of Z250 was the lowest of all. 2. The smoothest surface was produced by Mylar sheet on all materials. The polishing procedures, however, increased a roughness value. 3. The smoothest surfaces were produced by Sof-Lex, and there was significant difference of surface roughness between Sof-Lex and Enhance systems. 4. The smoother surfaces on the control group showed many scratches after the polishing procedures in the SEM findings.

• Korean journal of food and cookery science
• /
• v.17 no.6
• /
• pp.565-570
• /
• 2001

Soibirhym(Portulace oleracea) was extracted by methanol and its antimicrobial activities against food spoilage or foodborne disease microorganisms were investigated by the paper disc method. The microorganisms used in this experiment included 5 species of bacteria(Escherichia coli, Pseudomonas aeruginosa, Salmonella typhimurium, Klebsiella Pneumoniae, Staphylococcus aureus) and 3 species of fungi(Fusarium solani, Aspergillus flavius, Penicillium citreonigrum). Soibirhym showed high antimicrobial activites against P. citreonigrum, P. aeruginosa and K. pneumoniae. Minimum inhibitory concentrations(MICs) on S. aureus, P. citreonigrum and K. pneumoniae were 200, 200 and 250 mg/㎖, respectively. In the methanol extracts from Soibirhym, 147 kinds of compound were separated by GC/MS. The extraction yields of phenolics, furans, alcohols, acids and esters, ketones, aldehydes, and miscellaneous compounds were 7.43%, 6.13%, 2.20%, 41.06%, 9.21%, 0.15% and 1.08%, respectively. Some antimicrobial compounds such as 2,3-dihydro-benzofuran, 4-hydroxy-3-methoxy-benzoic acid, 4-hydroxy benzeneethanol were detected in the methanol extract.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.3
• /
• pp.53-62
• /
• 1998

In this research, 7 species of white rot fungi were used for determining the resistance against pentachlorophenol (PCP). Three fungi with good PCP resistance were selected for evaluating the biodegradability, and biodegradation mechanism by HPLC and GC/MS spectrometry. Among 7 fungi, there were significant differences on PCP resistance on 4 different PCP concentrations. In the concentrations of 50 and 100ppm ($\mu$g of PCP per g of 2% malt extract agar), most fungi were easily able to grow, and well suited to newly PCP-added condition, but in that of more than 250ppm, the mycelia growths of Ganoderma lucidum 20435, G. lucidum 20432, Pleurotus ostreatus, and Daldinia concentrica were significantly inhibited or even stopped by the addition of PCP to the culture. However, Trametes versicolor, Phanerochaete chrysosporium, and Inonotus cuticularis still kept growing at 250ppm, indicating the potential utilization of wood rot fungi to high concentrated PCP biodegradation. Particularly, P. chrysosporium even showed very rapid growth rate at more than 500ppm of PCP concentration. Three selected fungi based on the above results showed an excellent biodegradability against PCP. P. chrysosporium degraded PCP up to 84% on the first day of incubation, and during 7 days, most of added PCP were degraded. T. versicolor also showed more than 90% of biodegradability at 7th day, and even though the initial stage of degradation was very slow, I. cuticularis has been approached to 90% at 21 st day after incubation with dense growing pattern of mycelia. Therefore, the PCP biodegradability was definitely dependent on the rapid suitability of fungi to newly PCP-added condition. In addition, the PCP biodegradation by filtrates of P. chrysosporium, T. versicolor, and I. cuticularis was very minimal or limited, suggesting that the extracellular enzyme system may be not so significantly related to the PCP biodegradation. Among the biodegradation metabolites of PCP, the most abundant one was pentachloroanisole which resulted in a little weaker toxicity than PCP, and others were tetrachlorophenol, tetrachloro-hydroquinone, benzoic acid, and salicylic acid, suggesting that PCP may be biodegraded by several sequential reactions such as methylation, radical-induced oxidation, dechlorination, and hydroxylation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.1
• /
• pp.1-6
• /
• 2020

Purpose: This study evaluated color stability of Dentca 3D-printed denture teeth, in comparison to color stabilities of four conventional types of denture teeth, upon being immersed in various colorants. Materials and methods: Four types of conventional prefabricated denture teeth (Surpass, GC, Artic 6, Heraeus Kulzer, Premium 6, Heraeus Kulzer, Preference, Candulor), 3D-printed denture teeth (Dentca); and Z250 (Filtek Z250, 3M ESPE) were prepared for testing. The samples were immersed in erythrosine 3%, coffee, cola, and distilled water (DW) at 37℃. Color change (ΔE) was measured by spectrophotometer before immersion and at 7, 14, and 21 days after immersion. One-way analysis of variance was performed along with Tukey's honestly significant difference multiple comparisons test (P<.05). Results: No great difference was observed between the color change of Dentca denture teeth and that of conventional denture teeth in most cases (P>.05). The color change of Dentca denture teeth immersed in erythrosine 3% was greater than that of Surpass (ΔE = 0.67 ± 0.25) after 1 week; Artic 6 (ΔE = 1.44 ± 0.38) and Premium 6 (ΔE = 1.69 ± 0.35) after 2 weeks; and Surpass (ΔE = 1.79 ± 0.49), Artic 6 (ΔE = 2.07 ± 0.21), Premium 6 (ΔE = 2.03 ± 0.75), and Preference (ΔE = 2.01 ± 0.75) after 3 weeks (P<.05). Conclusion: A color change was observed in Dentca denture teeth when immersed in some colorants; however, the maximum value of ΔE for Dentca denture teeth was within the clinically acceptable range.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.4
• /
• pp.419-423
• /
• 2011

BACKGROUND: Inorganic component is made up largely of salt, because the criteria are difficult to split into domestic and imported ingredients, organic examined the fatty acid composition is to see a possible use as a marker using gas chromatography-mass spectrometry (GC-MS). The 14 domestic samples and 8 imported samples were collected from China, India and other countries were investigated on item of 37 fatty acids. METHODS AND RESULTS: The major components were six species, myristic acid ($C_{14:0}$), palmitic acid ($C_{16:0}$), palmitoleic acid ($C_{16:1}$), stearic acid ($C_{18:0}$), oleic acid ($C_{18:2,n9}$), linoleic acid ($C_{18:2,n6}$) among detected twenty fatty acids including 9 unknowns. The content of palmitic acid were highest as 25.2 to 50.8% of total fatty acids contents. Domestic has seen the most amount of salt in the Taepyeong salts $250.8{\mu}g$/100g, imports $135.2{\mu}g$/100g salt in Chinese Weifang salts showed the lowest content. CONCLUSION(s): The total fatty acid content has seen the most amount of salt in 352.3 ug/100g Christmas island salts showed the lowest content of $164.0{\mu}g$/100g, as a result it is difficult to distinguish the domestic salts and imported by the composition of fatty acid.

• Microbiology and Biotechnology Letters
• /
• v.19 no.2
• /
• pp.135-139
• /
• 1991

Tridecanedioic acid (DC-13), starting material of the valuable musk ethylene brassylate, was obtained from n-tridecane by the Candida tropicalis mutant. The mutants were first obtained from primary screening step using the selective medium and then solid phase extraction sampling method was used for the selective isolation of organic acids from the cultured media of mutants. The resulting acids were directly converted to volatile tert-butyldimethyl silyl delivatives, which were then analyzed by gas chromatography. The efficient GC profiling method was used for the rapid identification of the mutant producing DC-13 in large quantity, and for the optimization of the culture conditions of mutant. The optimal culture conditions were found as follows: pH 8.0, 30$^{\circ}C$, 250rpm, 48hour of culture and $(NH_4)_2HPO_4$ as nitrogen source.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.9
• /
• pp.1629-1635
• /
• 2016

A novel bacteriophage, PBES 02, infecting Cronobacter sakazakii was isolated and characterized. It has a spherical head of 90 nm in diameter and a tail of 130 nm in length, and belongs to Myoviridae as observed under a transmission electron microscope. The major virion protein appears to be 38 kilodaltons (kDa) in size. The latent period of PBES 02 is 30 min and the burst size is 250. Infectivity of the phage remained intact after exposure to temperatures ranging from 4℃ to 55℃ for 1 h. It was also stable after exposure to pHs ranging from 6 to 10 for 1 h. The phage effectively removed contaminating Cronobacter sakazakii from broth infant formula. PBES 02 has a double-stranded DNA genome of 149,732 bases. Its GC ratio is 50.7%. Sequence analysis revealed that PBES 02 has 299 open reading frames (ORFs) and 14 tRNA genes. Thirty-nine ORFs were annotated, including 24 related to replication and regulation functions, 10 related to structural proteins, and 5 related to DNA packaging. The genome of PBES 02 is closely related to that of two other C. sakazakii phages, CR3 and CR8. Comparison of DNA sequences of genes encoding the major capsid protein revealed a wide geographical distribution of related phages over Asia, Europe, and America.

• Advances in Energy Research
• /
• v.4 no.4
• /
• pp.325-337
• /
• 2016

Cerbera Odollam (sea mango) is a proven promising feedstock for the production of biodiesel due to its high oil content. Fatty acid methyl esters (FAME) were produced as the final reaction product in the transesterification reflux condensation reaction of sea mango oil and methyl acetate (MA). Potassium methoxide was used as catalyst to study its reacting potential as a homogeneous base catalyst. The initial part of this project studied the optimum conditions to extract crude sea mango oil. It was found that the content of sea mango sea mango oil was 55%. This optimum amount was obtained by using 18 g of grinded sea mango seeds in 250 ml hexane. The extraction was carried out for 24 hours using solvent extraction method. Response surface methodology (RSM) was employed to determine the optimum conditions of the reaction. The three manipulated variables in this reaction were the reaction time, oil to solvent molar ratio, and catalyst wt%. The optimum condition for this reaction determined was 5 hours reaction time, 0.28 wt% of catalyst and 1:35 mol/mol of oil: solvent molar ratio. A series of test were conducted on the final FAME product of this study, namely the FTIR test, GC-FID, calorimeter bomb and viscometer test.

• Journal of Korean Society on Water Environment
• /
• v.18 no.4
• /
• pp.421-433
• /
• 2002

This study was conducted to develope a simple, rapid and solvent-free solid-phase microextraction(SPME) procedure for extracting three organochlorine, one triazine and nine organophosphorus pesticides from water. The optimal conditions of SPME for analyses of organochlorine pesticides were obtained at $250^{\circ}C$ of desorption temperature, 45 minutes of equilibrium time, pH 6 and NaCl 0% addition using $100{\mu}m$ polydimethylsiloxane fiber and those of triazine and organophosphorus pesticides were obtained at $270^{\circ}C$ of desorption temperature, 60 minutes of equilibrium time, pH 6 and NaCl 0% addition using $100{\mu}m$ polydimethylsiloxane fiber. This method showed good lineality for organochlorine pesticides between 0.0001 and $10{\mu}g/L$ with regression coefficients ranging 0.9986~0.9992 and for triazine and organophosphorus pesticides between 0.01 and $10{\mu}g/L$ with regression coefficients ranging 0.9867~0.9998.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.2
• /
• pp.354-361
• /
• 2005

Vibrio fluvialis, an enteropathogenic bacterium, produces a phospholipase which is thought to be an important factor in the pathogenesis of disease. In this study, the phospholipase gene (vfp) was identified from V fluvialis (KCTC 2473) and its sequence was determined. The entire open reading frame was composed of 1,689 nuc1eotides and 563 amino acids. The phospholipase gene (vfp) was overexpressed in Escherichia coli as a his-tag fused protein. This recombinant protein (rVFP58) was solubilized with 6 M urea and purified by Ni-NTA affinity chromatography. The action mode of rVFP58 was determined by TLC and GC-MS, and it showed phospholipase B activity, which had both phospholipase A and lysophospholipase activities. The rVFP58 showed a maximum activity at pH around 9- 10 and temperature of about 40OC, and it was stable under alkaline condition over pH 9. The cytotoxicity of rVFP58 was evaluated, using a fish cell line, CHSE-2l4, and was found to cause significant cell death after 14 h of exposure to 250 $\mu$g of the protein.