• The Korean Journal of Food And Nutrition
• /
• v.13 no.2
• /
• pp.118-124
• /
• 2000

Lipoxygenase(LOX) in soybeans is responsible for beany flavors which limit the wide utilization of soybeans to foods. This study was conducted to analyze beany flavor compounds of the normal Hwagkeumkong and LOX-deficient soybean cultivars, Jinpumkong which lacks L-2, L-3, and Jinpumkong 2 which lacks all L-1, L-2, L-3. Using the combination of dynamic headspace sampling and gas chromatography-mass selective detector(DHS-GC-MSD) for analyzing volatile compounds, hexanal and hexanol were identified in whole soy flour of all three soybena cultivars. Hwangkeumkong had more volatile compounds than Jinpumkong and Jinpumkong 2 in defatted soy flour. Hexanal and acetic acid were identified in soy milk of all three soybean cultivars but Hwangkeumkong had more volatile compounds than Jinpumkong 2. From the analysis with a static headspace sampling(SHS) and GC-MSD the major compounds were hexanal, acetic acid, 1-hexanol, and 1-octen-3-ol. The content of acetic acid was similar among three cultivars. But contents of hexanal and pentanal in Jinpumkong 2 were less than that of Jinpumkong and Hwangkeumkong. Using GC-FID, Jinpumkong 2 had less contents of hexanal and pentanol than Hwangkeumkong in whole soy flour and defatted soy flour. In this study, LOX-deficient soybean cultivars showed less hexanal, pentanol and other compounds than the normal Hwangkeumkong. However quite amount of beany flavor compounds were identified in Jinpumkong and Jinpumkong 2. So further studies are required to characterize LOX isozymes, to understand the mechanisms of beany flavors production, and to develop some other methods for removing beany flavor.

• Journal of Food Hygiene and Safety
• /
• v.32 no.4
• /
• pp.284-289
• /
• 2017

Oxidized polyethylene wax (OPEW) is, one of the food additives, used as a coating agent in citrus fruits and nuts. OPEW is authorized to quantum satis in EU, USA, and is acceptable less than 250 mg/kg in Australia and New Zealand. But OPEW is unauthorized as a food additive in Korea. This study was to establish the analytical method of OPEW and demonstrate the effective application of various food samples. We first conducted to compare the various analytical method including acid value (AV), high temperature gel permeation chromatography (HT-GPC), matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF/MS), gas chromatography flame ionization detector (GC-FID) and fourier transform infrared spectroscopy (FT-IR). This result indicated that FT-IR spectrum of OPEW treated food sample displayed absorption bands for carbonyl group (C=O, $1714cm^{-1}$), ester group (C-O, $1463cm^{-1}$), aliphatic group (C-H, $2916cm^{-1}$). Furthermore, IR spectrum of OPEW treated food sample showed similar tendency with IR spectrum of OPEW standard. Therefore, it is confirmed that analytical method using FT-IR can be detected on analysis of OPEW in food. As a result of monitoring of 111 samples using established analytical method, OPEW was not detected in the food samples.

• Journal of the Korean Chemical Society
• /
• v.63 no.4
• /
• pp.246-252
• /
• 2019

In the system of GC-OTC/FID (Gas chromatography-Open Tubular Column/Flame Ionization Detector), DMSO (Dimethyl sulfide) solvent was used to separate the polar solvents (Alcohols). In this system DMSO was eluted later than the separated polar solvents. At this system to calculate chromatographic factors [adjusted retention time ($t_R^{\prime}=t_R-t_O$), capacity factor{$k^{\prime}=(t_R-t_O)/t_O$} and separation factor {${\alpha}=(t_{R2}-t_O)/(t_{R1}-t_O)$}], dead time($t_O$) is necessary, but the method to calculate it has not been reported yet. Therefore, we have tried to develop $t_O$. To calculate $t_O$, we conversed DMSO retention time (DMSO $t_R$) to logarithm ($f(x)={\log}\;t_{R(DMSO)}{\rightarrow}t_O$, $t_O={\log}$ 9.551=0.980). To confirm the optimization of the developed method, we compared with $CH_4\;t_R$ and ${\ln}\;t_{R(DMSO)}$. Both of the values calculated by $CH_4\;t_R$ and ${\ln}\;t_{R(DMSO)}$ were not suitable in the calculation k' and ${\alpha}$. The developed method in this study{${\log}\;t_{R(DMSO)}$} has satisfied both of the values k' criteria (1${\alpha}(1<{\alpha}<2)$. The developed calculation method in this study was easy and convenient, therefore it can be expected to be applied to these similar systems.

• Food Science of Animal Resources
• /
• v.33 no.5
• /
• pp.646-654
• /
• 2013

In this study, quantitative analysis of major volatile flavor compounds from yogurt was conducted using headspace-solid phase microextraction (HS-SPME) GC-FID analysis technique, and the changes of volatile aroma compounds during the storage period were evaluated. The yogurt was prepared with the addition of 2% cereals, such as, white rice (WR), brown rice (BR), germinated brown rice (GBR) and saccharified germinated brown rice (SGBR). After fermentation, the products were stored at $5^{\circ}C$for 15 d. The major volatile aroma compounds in yogurt, such as acetaldehyde, acetone, diacetyl and acetoin were able to be extracted using HS-SPME technique efficiently. The regression ($r^2$) value of standard curve prepared with various concentrations of individual flavor chemicals was analyzed over 0.9975, and reproducibility was acceptable to apply quantitative analysis. The analysis of volatile components of control sample during storage showed that the acetaldehyde on 0 d was 10.83 ppm, and that contents were increased to 15.67 ppm after 15 d of storage. However, addition of BR, GBR and SGBR decreased the acetaldehyde contents during storage periods. The acetone content of all treatments during storage was not significantly different. The diacetyl content of all treatments were increased during storage and the addition of SGBR showed the highest amount of diacetyl (0.84 ppm) among treatments on 15 d of storage. The acetoin content of yogurt added with grains was higher than that of control during storage. As a result, the content of volatile aroma compounds in yoghurt during storage period could be analyzed HS-SPME extraction technique effectively, and HS-SPME/GC analysis can be considered for quality control of fermented milk products.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.spc
• /
• pp.115-120
• /
• 2008

Lipid soluble vitamin E consists of tocopherols and tocotrienols depending upon double bonds in phytyl side chains attached to chromanol ring. Recent reports on antioxidative, anticancer, and cholesterol-lowering effects of tocotrienols have increased researches and commercialization of tocotrienols. Purple perilla (Perilla frutescens var. acuta Kudo) has been reported as a plant containing tocotrienols along with tocopherol forms of vitamin E based upon normal phase HPLC analysis. To confirm the existence or absence of tocotrienol form of vitamin E in purple perilla, comparative analysis using HPLC, GC/FID, and GC/MSD has been conducted for 14 purple perilla genetic accessions collected from Korea and Japan. Normal phase HPLC analysis showed ${\alpha}-$, ${\beta}-$, ${\gamma}-$, and ${\delta}-tocopherols$ along with peaks with retention times quite similar to ${\beta}-$ and ${\gamma}-tocotrienols$. Same purple perilla samples, analysed by GC exhibited ${\alpha}-$, ${\beta}-$, ${\gamma}-$, and ${\delta}-tocopherols$ quantitatively equivalent to HPLC results. However, no peaks for ${\beta}-$ and ${\gamma}-tocotrienols$ could be observed and unknown two peaks of similar retention times with ${\beta}-$ and ${\gamma}-tocotrienols$ were identified not corresponding tocotrienols by GC/MSD. These results suggest the absence of tocotrienol form of vitamin E in purple perilla as well as the necessity of using GC-based qualitative and quantitative vitamin E analysis to avoid misinterpretation of peaks with similar retention times as tocotrienol isomers when analysed by an HPLC.

• Resources Recycling
• /
• v.17 no.6
• /
• pp.50-56
• /
• 2008

A polypropylene fraction collected from the stream of post-consumer plastics was pyrolyzed. The aim of this study is to observe the dependence of yield of BTEX-aromatics normally used as solvent on the reaction temperature. To reach the goal, three experiments were carried out at different temperature between 650 and $700^{\circ}C$, using a fluidized bed reactor that shows an excellent heat transfer. In the experiments, product gases were used as a fluidizing medium to maximize the amount of BTEX-aromatics at fixed flow rate and feed rate during the pyrolysis. Oil, gas and char were obtained as product fractions. Product gases were analyzed with GCs(TCD, FID) and with a GC-MS system for qualitative analysis. For an accurate analysis of product oil, the product oil was distilled under vacuum, and separated the distillation residues from oil fractions that were actually analyzed with a GC-MS system. As the reaction temperature went higher, the content of BTEX-aromatics increased. The maximal yield of BTEX-aromatics was obtained at $695^{\circ}C$ with a value of about 30%. The main compounds of product gas were $CH_4$, $C_2H_4$, $C_2H_6$, $C_3H_6$, $C_4H_{10}$ and the product gas had an higher heating value about 45MJ/kg. It could be used as a heat source for a pyrolysis plant or for other fuel applications.

• Proceedings of the Korean Society of Food Hygiene and Safety Conference
• /
• 2002.05a
• /
• pp.127-131
• /
• 2002

Migration of di-(ethylhexyl)phthalate (DEHF) from PVC food packaging materials detected plasticizer into food simulanting solvents(4% Acetic acid, 8% Ethanol, 50% Ethanol, 95% Ethanol, Heptane) were studied. For executing this study ,2 PVC food packaging materials detected DEHP were used. Analysis was by GC-FID and GC-MSD(selected ion monitoring) for DEHP, and optimized for quantification of plasticizer. The recovery of DEHP into food simulanting solvents were min. 87.4${\pm}$ 3.6 ∼ max. 109.9 ${\pm}$ 10.7% respectively. Following exposure to food simulants 95% Ethanol for 24hours at 60$^{\circ}C$ the migration results of 1020.90 ${\pm}$ 10.15$\mu\textrm{g}$/g, 563.54 ${\pm}$ 5.60$\mu\textrm{g}$/dm$^2$and 73.51 ${\pm}$ 5.09$\mu\textrm{g}$/g 149.22 ${\pm}$ 10.34$\mu\textrm{g}$/dm$^2$were detected from the container for lunch and for stock fish respectively.

• Journal of Food Hygiene and Safety
• /
• v.20 no.4
• /
• pp.199-204
• /
• 2005

Three hundred sixty-eight samples of domestic PVC food packaging were analyzed fir DEHP(di-(2-ethyhexyl) phthalate) used in plasticizer by GC/FID and GC/MSD. The number of samples collected were 47(2000), 143(2001), 88(2002) and 89(2004) from local markets in Gyeonggi-Do. In $2000\∼2001$, DEHP was highly detected in 86 out of 190 samples and the level of DEHP were ranged from 1.3 g/kg to 82.8 g/kg. In 2002, meanwhile, DEHP was detected in 8 out ot 88 samples and the level of DEHP were shown to from 1.3 g/kg to 51.5 g/kg. In 2004, DEHP was detected in only one out of 89 samples and the amount was 30.5 g/kg. As a result of this study, it was made clear that the detection rates of DEHP in PVC food packaging were rapidly decrease every year.

• Korean Journal of Medicinal Crop Science
• /
• v.11 no.5
• /
• pp.352-357
• /
• 2003

Volatile flavor compounds Angelica gigas Nakai and Angelica acutiloba Kitagawa were extracted by SDE (simultaneous steam distillation & extraction) using the mixture of n-pentane and diethylether (1:1, v/v) as an extract solvent and analyzed by GC-FID and GC-MS. The amount of essential oils of top part and root in Angelica gigas were obtained in 0.063% (v/w) and 0.389% (v/w) yields as a fresh weight base, respectively. The main compounds in top parts and the root were identified as nonane (7.51% and 24.49%, respectively), ${\alpha}-pinene$ (14.64% and 31.75%), limonene+${\beta}-phellandrene$ (14.01% and 9.66%), ${\gamma}-terpinene$ (7.85% and 1.20%), germacrene-d (5.85% and 0.22%), (E,E)-${\alpha}-farnesene$ (6.05% and 1.40%), ${\beta}-eudesmol$ (5.26% and 1.84%). Although these compounds were present in both parts. The results showed large differences in. the concentrations of them much varied. The amount of essential oils stem and leaf obtained (0.068% and 0.127% in A. gigas) and (0.153% and 0.243% in A. acutiloba) yields as a fresh weight base, respectively. More than 18 and 32 components in stem and leaf have been identified, which of main components in A. gigas were ${\alpha}-pinene$, myrcene, limonene, germacrene-d, eudesmol and butylphthalide, but germacrene-d and butylphthalide contents were also different in stem and leaf. And more than 21 and 32 components in A. acutiloba were ${\gamma}-terpinene$ and butylphthalide. Volatile compounds were very different in both species.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.2
• /
• pp.320-328
• /
• 2014

Biodiesel has very similar physical properties (density, kinematic viscosity) and has even higher cetane number compare with conventional diesel. There are no necessity to change or modify the infra-structure & engine system. It is known that fatty acid methyl ester (FAME) is oxygen-contained components increasing the combustibility, biodegradability and reduced the exhaust harmful gas. These things made the biodiesel more popular as an alternative diesel fuel. But biodiesel's sources are controversial issues about $CO_2$ reduction effect at this time because those mainly come from edible plants such as soy, palm, rapeseed already spent lot of $CO_2$ to cultivate. Whereas micro-algae is focused because they are inedible and has rapid growth rates & high carbon-dioxide adsorption rate per area. In this study, we analyze the each FAME components using $GC{\times}GC$-TOFMS in stead of GC-FID and verify the previous total FAME contents method's applicability through the micro algal biodiesel derived from Dunaliella tertiolecta.