• 한국항해학회지
• /
• 제23권1호
• /
• pp.29-43
• /
• 1999

The production process of the compound-curved hull plates includes hull design, definition, fairing, modeling, lofting, cutting, and forming in sequence. Traditional fabrication methods and shop environment caused low level to productivity in medium and small sized shipyards. The most effective solution to solve those problems is to rationalize the layout of facilities. For the well-balanced development of domestic shipbuilding industry, it is urgently required to reduce the gap between modernized large sized shipyards and traditional small and medium sized shipyards in production technologies and efficiencies. For the efficient and accurate hull piece forming, all information from design to forming should be clarified and organized in a systematic manner. Thus, management of the information plays an important role in the computerized and automated of hull piece forming. The object of this paper is to survey the status of the field, to find out the feasibility and to introduce a draft of hull piece fabrication line for small and medium sized shipyards. The development of required system follows the object oriented technology to extend to simulation based system for carrying out physical product flow and facilities layout analysis. It is feasible to operate such a modernized facility for a group of small and medium shipyards who are unable to have each of their own facility because of its large amount of initial investment and insufficient work load.

• 항공우주시스템공학회지
• /
• 제10권3호
• /
• pp.39-43
• /
• 2016

In this paper, a wind-tunnel test is accomplished to investigate the roll characteristics of a variable-span wing flying inside a channel. The factors that affect the roll characteristics of the wing were identified by analyzing the measured data; accordingly, when the wing is flying without both the ground and sidewall effects, the asymmetric wing extension causes the roll moment. Both the ground and the sidewall can increase the roll moment, but when the wing is affected by both the ground and the sidewall, the roll moment does not increase as much as the case where the wing is only affected by the ground. Also, the aerodynamic characteristics of the flying wing inside a channel are the nonlinear function of the wing height and the gap between the wingtip and the sidewall, both of which should be considered in a study of the stability and the flight control of the wing-in-ground effect of the vehicle flying inside a channel.

• 혜화의학회지
• /
• 제14권2호
• /
• pp.107-112
• /
• 2005

Peripheral axons in vertebrate animals can regenerate after nerve injury and accomplish its functional recovery. Numerous studies have revealed that diverse molecular factors are induced during axonal regeneration and their potential roles in axonal regeneration have been studied. Examples is N-CAM, L1, P0, nerve growth factors, GAP-43 and so forth. However, most of the studies on axonal regeneration have been primarily focused on axon fiber regrowth and elucidating molecular factors, and relatively less is known about functional recovery. Also, specific drugs or drug components used in the oriental medicine in relation to nerve fiber regeneration have not been known. And thus, in the present, a study on the effect of Samul-tang components and Samul-tang extracts to regeneration of peripheral axon fiber is underway by immunofluorescence staining. Therefore, this prior application of Samul-tang with documents consideration is reported with a plea for further investigation.

• World Technopolis Review
• /
• 제7권1호
• /
• pp.15-43
• /
• 2018

The lack of appropriate performance appraisal and evaluation of incubatees of technology incubation programmes in relation to entrepreneurship development in Nigeria is a major gap that needs to be bridged. This study examined the effect of selected technology incubation programme variables such as training, financing and marketing on entrepreneurship development in Nigeria. A closed-ended questionnaire was used for data collection from the quota-sampled population of the six (6) geo-political zones of Nigeria. Descriptive statistics were used to analyse the data while multiple regression was used to test the hypotheses. The results revealed that technology incubation training has a significant effect on entrepreneurial ability in Nigeria; there is a significant and positive effect of technology incubation financing on entrepreneurial funding portfolio; there is no significant impact of technology incubation marketing programme on entrepreneurial turnover; and technology incubation has no significant impact on entrepreneurial propensity. The study recommended that the National Board for Technology Incubation (NBTI) expand the training modules to capture pre, post and virtual incubatees; to facilitate access to risk funds, cheap capital and encourage establishment of venture capital; to improve on its marketing programme to encompass all marketing needs of incubatees beyond trade-fair participation. However, trade-fairs participation has a significant but limited effect on entrepreneurial turnover, while a technology incubation programme has no significant impact on entrepreneurial propensity, as only six (6) out of the twenty-nine (29) respondents started new venture from the incubation centers which are industrial training students and staff of the incubatees.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.742-747
• /
• 2004

Hard disk drives (HDD) in computer are used extensively as data storage capacity. PIV measurement system was used fur 2-dimensional visualization of the unsteady flow between co-rotating disks in air both with a shroud and both with a actual-like case. Geometric parameters are gap height (H) between disks in the case of shroud. The lobe- structured boundary between inner region and outer region was visualized, and the number of dominant vertices was determined clearly. It is found from flow visualization that the number of vortex cells can be correlated with Reynolds number based on H which is defined as R $e_{H}$ =ΩRH/v ranging from 7.96$\times$10$^2$ to 1.43$\times$10$^4$, and decreases as the disk speed increases. In the case of a actual-like case, the boundary between inner region and outer region appears cleary when head position located at outer diameter with no damper. It is detected with a case of head position middle diameter that the tip wake is generated behind HGA using PIV measurement and calculation.n.

• 한국입자에어로졸학회지
• /
• 제8권1호
• /
• pp.37-43
• /
• 2012

In this study, we designed a 'spark in liquid' system. The spark discharge between two electrodes were used to generate particles by using sufficient temperature to evaporate a part of electrodes. The power supply system provides a continuous spark discharge by discharging of the capacitor to ionize the electrodes in liquid. The DC spark discharge system operates with 1-10 kV voltage. Processed copper and graphite rods were used to both electrodes with 1-3 mm diameter. There are several variables which can control the particle size and concentration such as gap distance between electrodes, applied voltage, operating liquid temperature, electrode type and liquid type. So we controlled these variables to confirm the change of particle size distribution and concentration of particles contained in liquid as wt%. 'spark in liquid' system is expected to apply nanoink by control of concentration with analysis of characteristics.

• 복식
• /
• 제42권
• /
• pp.43-58
• /
• 1999

The purpose of this study was to investigate the effect of perceived risk and product express-ive self-image on the consumer's adoption of casua hanbok. A questionnaire was developed and data colle-cted from 269 women in Pusan. Data were analyzed to investigate the relation-ship among purchase intention perceived risk and product epressive self-image. Marketing implication about risk reduction was discussed. The results of this study were as follows. 1. Consumer's perceived risk on adoption o casual hanbok classified into four factors They were the risk on the confirmation of advantage of casual hanbok the risk on the negative viewpoint of others the risk on the complexity of dressing and care and the risk on the shortcoming of casual hanbok. It was explained that casual hanbok is innovative product. 2. According to the level of adoption of casual hanbok. consumers were categorized into three groups i.e. adopter potential adopter rejector. They differed in the degree of risk perception age and subjective knowledge redlated to casual hanbok. 3. Consumer's subjective knowledge age and two types of risk has predicting power to the purchase intention. Consumer's subjective knowledge was the best predicted factor and risk perception was negatively related to purchase intention. 4. The significant differences among the categ-orized consumer group was founded in the ideal self image and product expressive self-image 5. The gap of perception between ideal self-image and product expressive self-image was significantly different in each categorized consumer groups.

• 한국도서관정보학회지
• /
• 제43권2호
• /
• pp.29-52
• /
• 2012

스마트 기기의 활용으로 인해 정보격차의 전통적인 의미가 변화하고 있으며, 기존의 정보격차가 해소되는 현상이 나타나고 있다. 반면, 스마트 기기의 보급이 보다 심화된 새로운 차원의 정보격차를 생성하고 있다는 주장 또한 제기되고 있다. 본 연구에서는, 이러한 상반된 현상의 원인을 파악하고, 현재 정보환경에서의 정보격차 현황을 확인하고자 한다. 이를 위해, Pew Research Center의 설문조사 결과를 활용하여 기존의 정보격차 생성요인들과 스마트 기기 보유 사이의 관련성을 상관적으로 분석하였으며, 스마트 기기가 정보격차에 미치는 영향을 실증적으로 분석하였다. 이와 함께, 스마트폰을 이용한 정보활용의 범위를 측정하여 스마트 디바이드의 발생여부를 통계적으로 확인하였다.

• 한국산학기술학회논문지
• /
• 제17권2호
• /
• pp.214-219
• /
• 2016

그레이팅은 건축, 토목에서 배수의 주목적으로 하는 구조물이다. 본 연구 에서는 가로형 그레이팅보다 유속에 대한 저항성을 감소시킨 구조인 세로형 그레이팅의 3가지 모델(35.3형, 40형, 43형)을 시뮬레이션하여, 응력 분포 및 변형에 대해 연구하고 최적의 격자 간격의 그레이팅을 설계함이 목적이다. 세로형과 가로형 그레이팅에 하중에 대한 최대 응력 및 변형을 비교 분석하여 보다 나은 제품을 확인하였다.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1993년도 제2회 신약개발 연구발표회 초록집
• /
• pp.135-135
• /
• 1993

신호전달과정에 중요한 역할을 하고 있는 다기능 serinei/threonine 단백질인산화효소인 protein kinase C(PKC)의 연구를 위해 이 효소의 정제를 뇌에서 착수하였다 PKC의 활성측정을 myelin basic protein을 기질로 하여 20 mM Tris 완충용액 PH 7.5, 0.15 mM [${\gamma}$-$^{32}$P]ATP(3 $\times$ $10^{5}$ cpm), 0.1 mM $Ca^{2＋}$, 10$\mu\textrm{g}$ phosphatidylserine과 2$\mu\textrm{g}$ diolein을 넣어 반응시켰다. 반응은 TCA로 정지시킨 후 방사성 단백질을 Millipore filter paper로 걸러 섬광 계수기로 읽었다. Cytosol PKC의 정제과정은 첫 단계에서 DEAE-cellulose를 사용하였으며, phenyl sepharose CL-4B와 protamine agarose를 연속적으로 이용하여 800배의 정제에 성공했다. SDS-PACE 상에서 80 kD로 나타났으며 순도는 95 % 이상이였다. 이를 이용 PKC의 각종 기질 연구에 착수하기 시작했으며, 이중 MBP의 인산화연구를 통한 myelin의 안정성과 MBP와의 구조 관계가 일부 수행되고 있다 연차적으로 PKC와 이와 관련된 단백질의 특성을 살피기 위해 뇌의 PKC 기질 중 cold stress를 통해 환경에 민감한 것을 찾고 있으며, 현재 autoradiography를 이용해 80 kD, 54 kD, 49 kD와 35 kD의 단백질이 연구대상이 되고있다. 그 중 49 kD는 B-50(또는 GAP43, neuromodulin이라고도 함)일 가능성이 높아 이 단백질 조절과 PKC 활성화 사이의 관계 정립이 흥미로운 과제로 대두되고 있다.다.