• Nutritional Sciences
• /
• v.7 no.2
• /
• pp.88-91
• /
• 2004

New Dietary Reference Intakes (DRIs) forthe United States and Canada have recently been set for both macronutrients and micronutrients, and are likely to be of interest to health professionals in Korea as well. DRIs are now available for nutrients that did not have Recommended Dietary Allowances set in the past (amino acids, n-3 and n-6 fatty acids, total fiber, added sugar, choline, boron, nickel, and vanadium). Furthermore, the units for the DRIs do not always match those traditionally carried on food composition tables (FCTs). FCT developers will also need to consider carrying new variables to allow the calculation of folate intake in $\mu$g of dietary folate equivalents, vitamin E intake as mg of a-tocopherol (not as mg of a-tocopherol equivalents), and vitamin A intake as $\mu$g of retinol activity equivalents (not as $\mu$g of retinol equivalents). Because the new recommendations for upper levels of intake sometimes refer to a specific form or source of a nutrient, nutrients occurring in foods must be separated from added or supplemental forms for vitamin E, niacin, and folate; pharmacological magnesium must be carried as a separate variable; and preformed vitamin A must be separated from vitamin A from carotenoids. For more information on the DRIs, see: www.nap.edu.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.2
• /
• pp.647-669
• /
• 2016

Multiple attribute for decision making including user preference will increase the complexity of route selection process. Various approaches have been proposed to solve the optimal route selection problem. In this paper, multi attribute decision making (MADM) algorithms such as Simple Additive Weighting (SAW), Weighted Product Method (WPM), Analytic Hierarchy Process (AHP) method and Total Order Preference by Similarity to the Ideal Solution (TOPSIS) methods have been proposed for acoustic signature based optimal route selection to facilitate user with better quality of service. The traffic density state conditions (very low, low, below medium, medium, above medium, high and very high) on the road segment is the occurrence and mixture weightings of traffic noise signals (Tyre, Engine, Air Turbulence, Exhaust, and Honks etc) is considered as one of the attribute in decision making process. The short-term spectral envelope features of the cumulative acoustic signals are extracted using Mel-Frequency Cepstral Coefficients (MFCC) and Adaptive Neuro-Fuzzy Classifier (ANFC) is used to model seven traffic density states. Simple point method and AHP has been used for calculation of weights of decision parameters. Numerical results show that WPM, AHP and TOPSIS provide similar performance.

• Nuclear Engineering and Technology
• /
• v.53 no.5
• /
• pp.1403-1415
• /
• 2021

The transient capability of a SP₃ based pin-wise core analysis code SPHINCS is developed and verified through the analyses of the C5G7-TD benchmark. Spatial discretization is done by the fine mesh finite difference method (FDM) within the framework of the coarse mesh finite difference (CMFD) formulation. Pin size fine meshes are used in the radial fine mesh kernels. The time derivatives of the odd moments in the time-dependent SP₃ equations are neglected. The pin homogenized group constants and Super Homogenization (SPH) factors generated from the 2D single assembly calculations at the unrodded and rodded conditions are used in the transient calculations via proper interpolation involving the approximate flux weighting method for the cases that involve control rod movement. The simplifications and approximations introduced in SPHINCS are assessed and verified by solving all the problems of C5G7-TD and then by comparing with the results of the direct whole core calculation code nTRACER. It is demonstrated that SPHINCS yields accurate solutions in the transient behaviors of core power and reactivity.

• Environmental Engineering Research
• /
• v.24 no.3
• /
• pp.449-455
• /
• 2019

To investigate the effect of seaweed (SW) addition on anaerobic co-digestion of food waste (FW) and sewage sludge (SS), batch experiments were conducted at various substrate concentrations (2.5, 5.0, 7.5, and 10.0 g volatile solids (VS)/L) and mixing ratios ((FW or SS):SW = 100:0, 75:25, 50:50, 25:75, and 0:100 on a VS basis). The effect of SW addition on FW digestion was negligible at low substrate concentration, while it was substantial at high substrate concentrations by balancing the rate of acidogenesis and methanogenesis. At 10 g VS/L, $CH_4$ production yield was increased from 103 to $350mL\;CH_4/g$ VS by SW addition (FW:SW = 75:25). On the other hand, SW addition to SS enhanced the digestion performance at all substrate concentrations, by providing easily biodegradable organics, which promoted the hydrolysis of SS. $k_{hyd}$ (hydrolysis constant) value was increased from 0.19 to $0.28d^{-1}$ by SW addition. The calculation showed that the synergistic $CH_4$ production increment by co-digesting with SW accounted for up to 24% and 20% of total amount of $CH_4$ production in digesting FW and SS, respectively.

• The Korean Journal of Ceramics
• /
• v.6 no.4
• /
• pp.339-342
• /
• 2000

In the present study, we attempted to apply DV-X$\alpha$ method to expressing the reactivity of materials. The expression of reactivity was discussed by comparison between ${\gamma}$-C$_2$G having hydraulic activity and ${\gamma}$-C$_2$S not having hydraulic activity at normal conditions. It was found that the model cluster used for calculation can finely reproduce the bulk and surface states using with and without point charge, respectively. The hydration state was also represented by placing OH￣ on the surface of the cluster. It was calculated that the bond strength of the first layer (as surface) was bigger than that of inner layers (as bulk) for ${\gamma}$-C$_2$S while that of the first layer for ${\gamma}$-C$_2$G was smaller than that of inner layers. Subsequently a model in which OH￣ is coordinated on Ca at the surface was also calculated. The bond strength with OH￣ was stronger than that without OH￣, while for ${\gamma}$-C$_2$G the bond strength with OH￣ was weaker than that without OH￣. From these results, it is concluded that the hydraulic activity depends on whether the bond strength for hydrated state becomes weaker than that unhydrated state or not.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.4
• /
• pp.405-415
• /
• 2011

The objective of this study was to compare greenhouse gas emissions from road transportation by calculation methods (Tier 1, Teir 2, and Tier 3). Tier 1 based on 2006 IPCC guidelines default emission factor and amount of fuel consumption. The Tier 2 approach is the same as Tier 1 except that country-specific carbon contents of the fuel sold in road transport are used. Tier 2 based on emission factor of guidelines for local government greenhouse gas inventories (Korea Environment Corporation), the fuel consumption per one vehicle, and the registered motor vehicles. The Tier 3 approach requires detailed, country-specific data to generate activity-based emission factors for vehicle subcategories (National Institute of Environmental Research) and may involve national models. Tier 3 calculates emissions by multiplying emission factors by vehicle activity levels (e.g., VKT) for each vehicle subcategory and possible road type. VKT was estimated by using GIS road map and traffic volume of the section. The GHG average emission rate by the Tier 1 was 728,857 $tonCO_2eq$/yr, while Tier 2 and Tier 3 were 864,757 $tonCO_2eq$/yr and 661,710 $tonCO_2eq$/yr, respectively. Tier 3 was underestimated by 10.1 and 20.7 percent for the GHG emission observed by Tier 1 and Tier 2, respectively. Based on this study, we conclude that Tier 2 is reasonable GHG emissions than Tier 1 or Tier 3. But, further study is still needed to accurate GHG emission from Tier 3 method by expanding the traffic survey area and developing the model of local road traffic.

• Proceedings of the KSAR Conference
• /
• 2001.03a
• /
• pp.69-69
• /
• 2001

The cell cycle phase in which donor nuclei exist prior to nuclear transfer is an important factor governing developmental rates of reconstituted embryos. It was suggested that quiescent G0 and cycling G1 cells could support normal development of reconstituted embryos. In a quest of optimized donor nuclei treatment prior to nuclear transfer, this study was undertaken to examine the cell cycle characteristics of bovine fetal and adult somatic cells when cultured under a variety of culture treatments and the cell cycle change with the lapse of time after trypsinization. This was archived by measuring the DNA content of cells using flow cytometry, Cultured fetal fibroblast cells, adult skin and muscle cells, and cumulus cells were divided by 3 culture treatments; 1) grown to 60-70% confluency (cycling), 2) serum starved culture, 3) culture to confluency. Trypsinized cells were fixed by 70% ethanol and stained with propidium iodide. For one experiment, trypsinized cells were resuspended in DMEM＋10% FBS and incubated for 1.5, 3 and 6 h with occasional shaking before ethanol fixation. Cell cycle phases were determined by flow cytometry enabling calculation of percentages of G0＋G1, S and G2＋M. The majority of cells were in G0＋Gl stage regardless of origin of cells. Cultures that were serum starved or cultured to confluency contained significantly (P<0.05) higher percentages of cells in G0＋G1 (89.5-95.4%). For every cell lines and culture treatments, percentages of cells in existing in G0＋G1 increased with decreasing of the cell size from large to small. In the serum starved and confluency groups, about 98% of small cells were in G0＋G1 Serum starved culture contained higher percentages of small-sized cells (38.5-66.9%) than cycling and confluent cultures regardless of cell lines (P<0.05). After trypsinization of fetal fibroblast and adult skin cells that were serum starved and cultured to confluency, the percentages of cells in G0＋G1 significantly increased by incubation for 1.5(95.7-99.5%) and 3.0 h (95.9-98.6%). The results suggest that the efficient synchronization of bovine somatic cells in G0＋G1 for nuclear transfer can be established by incubation for a limited time period after trypsinization of serum starved or confluent cells.

• Journal of Climate Change Research
• /
• v.4 no.2
• /
• pp.115-126
• /
• 2013

Recently Korea considers the source of biomass burning emissions reflecting national characteristic, so that includes the inventory of emission source but preceding research is rarely implemented in Korea. Therefore, a study on characteristics of greenhouse gas emissions from biomass burning is necessary and it also makes the source management effectively when the climate-atmospheric management system takes effect. In this study, using the manufactured charcoal kiln and the number of experiment was three times to get a reliable experiment result. The sampling time was decided by changing degree in charcoal kiln and charcoal manufacturing process. The results of calculation greenhouse gas emission factor from charcoal kiln were $668g\;CO_2/kg$, $20g\;CH_4/kg$, $0.01g\;N_2O/kg$. Using the emission factor developed in this study, estimate the emissions from charcoal kiln in Korea. The results of calculation were $46,040ton\;CO_2/yr$, $1,378ton\;CH_4/yr$, $0.69ton\;N_2O/yr$ and greenhouse gas emissions applying GWP are as follows. $CH_4$ emissions was $28,947ton\;CO_2eq./yr$, $N_2O$ emissions was $214ton\;CO_2eq./yr$. As a results, Gross emissions of charcoal kiln in Korea was $75,201ton\;CO_2eq./yr$, but the oak used in this study is included to the biomass so emissions of $CO_2$ are excluded. Therefore the net emissions of charcoal kiln in Korea was $29,161ton\;CO_2eq./yr$.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.77-79
• /
• 1996

The model interrupters of $SF_6$ gas electromagnetic contactor whose ratings are 7.2kV, 4.0kA have been designed and manufactured on the basis of theoretical and computational analysis for its development. The eddy current analysis, the magnetic field analysis and the calculation of the rotational force on arcs have been conducted using FLUX2D package. The short circuit current interrupting tests have been conducted for the model interrupters using the simplified synthetic testing facility in KERI. The results show that the model interrupters have sufficient interrupting capability and the new design concept is prefer for good interrupting performance.

• 한국전산유체공학회:학술대회논문집
• /
• 1997.10a
• /
• pp.106-112
• /
• 1997

The effects of radiative heat transfer are investigated in a turbulent combustion flow field with highly non-adiabatic flames. Turbulent combustion is modeled by the $k-{\varepsilon}-g$ model and a one step irreversible reaction scheme for the combustion chemistry. The radiative trasport equation is solved by the finite volume method considering the radiative transfer from $CO_2,\;H_{2}O$ and soot only. Gray gas is assumed to calculate the radiative properties of $CO_2\;and\;H_2O$. A two-equation soot formation model is applied to predict soot volume faction distribution. All equations are solved in a coupled manner and the numerical results are compared with available experimental data.