• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(1)
• /
• pp.185-190
• /
• 1996

RFSP is a computer program to do fuel management calculations for CANDU reactors. Its main function is to calculate neutron flux and power distributions using two-energy-group, three dimensional neutron diffusion theory. However, up to now the treatment has not been true two-group but actually "one-and-half groups". In other words, the previous (1.5-group) version of RFSP lumps the fast fission term into the thermal fission term. This is based on the POWDERPUFS-V Westcott convention. Also, there is no up-scattering term or bundle power over cell flux (H1 factor) for the fast group. While POWDERPUFS-V provides only 1.5 group properties, true two-group cross sections for the design and analysis of CAUDU reactors can be obtained from WIMS-AECL. To treat the full two-group properties, the previous RFSP version was modified by adding the fast fission, up-scatter terms, and H1 factor. This two-group version of RFSP is a convenient tool to accept lattice properties from any advanced lattice code (e.g. WIMS-AECL DRAGON, HELIOS...) and to apply to advanced fuel cycles. In this study, the modification to implement the true two-group treatment was performed only in the subroutines of the ＊SIMULATE module of RFSP. This module is the appropriate one to modify first, since it is used for the tracking of reactor operating histories. The modified two-group RFSP was evaluated with true two-group cross sections from WIMS-AECL. Some tests were performed to verify the modified two-group RFSP and to evaluate the effects of fast fission and up-scatter for three core conditions and four cases corresponding to each condition. The comparisons show that the two-group results are quite reasonable and serve as a verification of the modifications made to RFSP. To assess the long-term impact of the full 2-group treatment, it is necessary to simulate a long period (several months) of reactor history. It will also be necessary to implement the full two-group treatment of reactivity devices and assess the reactivity-device worths.ce worths.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제21권5호
• /
• pp.461-469
• /
• 2021

Background: The global population is aging rapidly, and accordingly, the number of patients with dementia is increasing every year. Although the need for dental treatment increases for various reasons in patients with dementia, they cannot cooperate during dental treatment. Therefore, behavioral management, including sedation (SED) or general anesthesia (GA), is required for patients with dementia. Thus, this study aimed to investigate the trends and effects of SED or GA in patients with dementia undergoing dental treatment in South Korea based on the Korean National Health Insurance claims data. Methods: This study utilized customized health information data provided by the Health Insurance Review and Assessment Service. Among patients with records of using sedative drugs during dental treatment from January 2007 to September 2019, patients with the International Classification of Diseases-10 code for dementia (F00, F01, F02, F03, and G30) were selected. We then analyzed the full insurance claims data for dental care. Age, sex, sedative use, and dental treatment of patients were analyzed yearly. In addition, the number of cases of GA or SED per year was analyzed, and changes in behavioral management methods with increasing age were investigated. Results: Between January 2007 and September 2019, a total of 4,383 (male, 1,454; female, 2,929) patients with dementia received dental treatment under SED or GA. The total number of SED and GA cases were 1,515 (male, 528 ; female, 987 ) and 3,396 (male, 1,119 ; female, 2,277) cases, respectively. The total number of cases of dental treatment for 4,383 patients with dementia was 153,051 cases, of which 2.22% were under GA and 0.98% were under SED. Midazolam was the most commonly used drug for SED. Conclusion: Although gingivitis and pulpitis were the most common reasons for patients with dementia to visit the dentist, GA or SED for patients with dementia was frequently used in oral and maxillofacial or periodontal surgery.

• Nuclear Engineering and Technology
• /
• 제53권12호
• /
• pp.4137-4141
• /
• 2021

As NPPs continue to operate, liquid waste continues to be generated, and containers are needed to store and transport them at low cost and high capacity. To transport and store liquid phase very low-level radioactive waste (VLLW), a container is designed by considering related regulations. The design was constructed based on the existing container design, which easily transports and stores liquid waste. The radiation shielding calculation was performed according to the composition change of barium sulfate (BaSO₄) using the Monte Carlo N-Particle (MCNP) code. High-density polyethylene (HDPE) without mixing the additional BaSO₄, represented the maximum dose of 1.03 mSv/hr (<2 mSv/hr) and 0.048 mSv/hr (<0.1 mSv/hr) at the surface of the inner container and at 2 m away from the surface, respectively, for a 10 Bq/g of ⁶⁰Co source. It was confirmed that the dose from the inner container with the VLLW content satisfied the domestic dose standard both on the surface of the container and 2 m from the surface. Although it satisfies the dose standard without adding BaSO₄, a shielding material, the inner container was designed with BaSO₄ added to increase radiation safety.

• Nuclear Engineering and Technology
• /
• 제51권5호
• /
• pp.1444-1450
• /
• 2019

The fast-neutron shielding behaviour (FNSB) of two clay-materials (Ball clay and Kaolin)of Southwestern Nigeria ($7.49^{\circ}N$, $4.55^{\circ}E$) have been investigated using effective removal cross section, ${\Sigma}_R(cm^{-1})$, mass removal cross section, ${\Sigma}_{R/{\rho}}(cm^2g^{-1})$ and Mean free path, ${\lambda}$ (cm). These parameters decide neutron shielding behaviour of any material. A computer program - WinNC-Toolkit has been used for computation of these parameters. The toolkit evaluates these parameters by using elemental compositions and densities of samples. The proficiency of WinNC-Toolkit code was probe by using MCNPX and GEANT4 to model fast neutron transmission of the samples under narrow beam geometry, intending to represent the actual experimental setup. Direct calculation of effective removal cross section ($cm^{-1}$) of the samples was also carried out. The results from each of the methods for each types of the studied clay-materials (Ball clay and Kaolin) shows similar trend. The trend might be the fingerprint of water content retained in each of the samples being baked at different temperature. The compositions of each sample have been obtained by Particle-Induced X-ray Emission (PIXE) technique (Tandem Pelletron Accelerator: 1.7 MV, Model 5SDH). The FNSB of the selected clay-materials have been compared with standard concrete. The cognizance of various factors such as availability, thermo-chemical stability and water retaining ability by the clay-samples can be analyzed for efficacy of the material for their FNSB.

• Coupled systems mechanics
• /
• 제8권4호
• /
• pp.339-350
• /
• 2019

A numerical simulation of the incompressible multiphase hydraulic jump flow was performed to compare the interface prediction through the use of the three RANS turbulence models: $k-{\varepsilon}$, $RNGk-{\varepsilon}$ and SST $k-{\omega}$. A three dimensional no submerged hydraulic jump and a two dimensional submerged hydraulic jump were modeled. Both the geometry and the mesh were created using the open source Gmsh code. The project's geometry consists of a rectangular channel with length and height differences between the two dimensional and three dimensional simulations. Uniform hexahedral cells were used for the mesh. Three refining meshes were constructed to allow to verify simulation convergence. The Volume of Fluid (abbr. VOF) method was used for treatment of the air-water surface. The turbulence models were evaluated in three distinct set up configurations to provide a greater accuracy in the flow representation. In the two-dimensional analysis of a submerged hydraulic jump simulation, the turbulence model RNG RNG $k-{\varepsilon}$ provided a better interface adjust with the experimental results than the model $k-{\varepsilon}$ and SST $k-{\omega}$. In the three-dimensional simulation of a no-submerged hydraulic jump the k-# showed better results than the SST $k-{\omega}$ and RNG $k-{\varepsilon}$ capturing the height and length of the ledge with a better fit with the experimental results.

• 한국수산과학회지
• /
• 제52권1호
• /
• pp.19-26
• /
• 2019

The objective of this study was to analyze bacteriological and chemical hazards in minimally processed commercial fish products, including Hwangtae (freeze-dried pollock), dried anchovy, fermented anchovy sauce, and salted and dried yellow croaker. Escherichia coli counts from all samples were below the regulation limits of the Korean Ministry of Food and Drug Safety Standards on Quality of Seafood and Seafood Products (Food Code). However, the food poisoning bacterium Staphylococcus aureus was detected at levels above $1.0{\times}10^2$ colony forming units (CFU)/g in Hwangtae, dried anchovy, and salted and dried yellow croaker, which are commonly ingested without heating and pose bacteriological hazards. The detection of S. aureus, an organism indicative of poor personal hygiene, which can be introduced by employees and multiply during distribution, indicates the necessity of improving the sanitary control of minimally processed commercial fish products. Histamine was not detected from dried anchovy or salted and dried yellow croaker, but was detected at some of the highest levels in fermented anchovy sauces. This result suggests that efforts to reduce the amount of histamine in fermented anchovy sauces are required.

• 대한한방내과학회지
• /
• 제41권6호
• /
• pp.1015-1029
• /
• 2020

Purpose: This study assessed the validity of a questionnaire (SEID-Q27) for diagnosis of chronic fatigue syndrome (CFS), designed based on the systematic exertion intolerance disorder (SEID) criteria. Methods: Two groups of participants were recruited: 1. a non-CFS control group: adult university personnel with a Chalder fatigue scale (CFQ) score ≥15, and 2. a CFS patient group: patients from an online CFS community diagnosed with CFS (diagnostic code of G93.3) with the symptoms present. The survey ran from September to October, 2020. The validity of the questionnaire was investigated by factor analysis and receiver operator characteristic (ROC) analysis. Results: Among the 35 adults surveyed, 30 (86%) participants had CFQ scores ≥15 (15 males and 15 females) and 5 (14%) had a CFS diagnosis (2 males and 3 females). The total mean score was significantly different between the two groups (CFS: 6.8±2.2 vs. control: 4.4±2.4, p<0.05). The area under the curve (AUC) was 0.827. With a cut-off point 62, the sensitivity was 60%, specificity 97%, and the discriminant ability of the survey was 79%. Conclusions: The SEID -Q27 appears to be a useful instrument for the diagnosis of CFS using SEID criteria. However, further large-scale studies are needed with greater numbers of participants.

• International Journal of Computer Science & Network Security
• /
• 제22권2호
• /
• pp.406-412
• /
• 2022

Storing large amounts of data has always been a big problem from the beginning of computing history. Big Data has made huge advancements in improving business processes by finding the customers' needs using prediction models based on web and social media search. The main purpose of big data stream processing frameworks is to allow programmers to directly query the continuous stream without dealing with the lower-level mechanisms. In other words, programmers write the code to process streams using these runtime libraries (also called Stream Processing Engines). This is achieved by taking large volumes of data and analyzing them using Big Data frameworks. Streaming platforms are an emerging technology that deals with continuous streams of data. There are several streaming platforms of Big Data freely available on the Internet. However, selecting the most appropriate one is not easy for programmers. In this paper, we present a detailed description of two of the state-of-the-art and most popular streaming frameworks: Apache Ignite and Hazelcast. In addition, the performance of these frameworks is compared using selected attributes. Different types of databases are used in common to store the data. To process the data in real-time continuously, data streaming technologies are developed. With the development of today's large-scale distributed applications handling tons of data, these databases are not viable. Consequently, Big Data is introduced to store, process, and analyze data at a fast speed and also to deal with big users and data growth day by day.

• Journal of Korean Neurosurgical Society
• /
• 제65권4호
• /
• pp.507-513
• /
• 2022

Objective : The goal of the following statewide age and gender-coordinated cohort study in Korea is to find out if there is a link between acute myocardial infarction (AMI) and Parkinson's disease (PD). Methods : Utilizing the National Health Insurance Sharing Service cohort, patient data were collected. Six thousand four hundred seventy-five individuals with PD were distinguished by utilizing the International Classification of Diseases 10 code G20 and have enrolled in the PD group. The number of participants decreased to 5259 after excluding 1039 patients who were hospitalized less than one time or who visited an outpatient clinic less than twice. Then, 26295 individuals were selected as part of the control group after case control matching was conducted through 1 : 5 age- and gender-coordinated matching. The Cox proportional hazard regression analysis and Kaplan-Meier method were utilized to analyze the likelihood of AMI in PD. Results : After controlling for age and gender, the hazard ratio of AMI in the PD group was 3.603 (95% confidence interval [CI], 2.837-4.577). After that, the following hazard ratio of AMI in the PD group was modified against for co-morbid medical disorders, resulting in 3.551 (95% CI, 2.795-4.511). According to a subgroup analysis, in males and females aged <65 and aged ≥65 and in the non-diabetes and diabetes, hypertension and non-hypertension, dyslipidemia and non-dyslipidemia subgroups, the AMI incidence rates were dramatically higher in the PD group compared to that of the control. Conclusion : Individuals with PD have a greater chance of AMI, according to this cross-national study.

• Nuclear Engineering and Technology
• /
• 제53권7호
• /
• pp.2184-2194
• /
• 2021

The Free-Piston Stirling engine (FPSE) is of interest for many research in aerospace due to its advantages of long operating life, higher efficiency, and zero maintenance. In this study, a 1-kW FPSE was proposed by analyzing the requirements of Space Reactor Power Systems (SRPS), of which performance was evaluated by developing a code through the Simple Analysis Method. The results of SAM showed that the critical parameters of FPSE could satisfy the designed requirements. The heater of the FPSE was designed with the copper rectangular fins to enhance heat transfer, and the parametric study of the heater was performed with Computational Fluid Dynamics (CFD) software STAR-CCM⁺. The Performance Evaluation Criteria (PEC) was used to evaluate the heat transfer enhancement of the fins in the heater. The numerical results of the CFD program showed that pressure drop and Nusselt number ratio had a linear growth with the height of fins, and PEC number decreased as the height of fins increased, and the optimum height of the fin was set as 4 mm according to the minimum heat exchange surface area. This paper can provide theoretical supports for the design and numerical analysis of an FPSE for SRPSs.