• 한국음향학회지
• /
• 제35권4호
• /
• pp.280-287
• /
• 2016

본 논문에서는 다채널 능동 소음 제어를 위한 적응 필터에 적용할 수 있는 정규화된 FxLMS(Filtered-x Least Mean Square) 알고리즘을 제안하였다. 단일 채널 능동 소음 제어를 위한 FxLMS 알고리즘의 경우는 기존의 NLMS(Normalized Least Mean Square) 알고리즘과 같은 방식으로 정규화할 수 있는 반면, 다채널 능동 소음 제어의 경우에는 단일 채널 방식의 정규화 알고리즘을 그대로 적용할 수 없다. 먼저, 최소 교란 원리에 근거한 일반화된 정규화 알고리즘을 이용하여, 역행렬 연산을 피하기 위하여 대각 성분만을 고려한 정규화 알고리즘을 제안하였다. 컴퓨터 모의 실험을 통하여 제안된 알고리즘을 정규화되지 않은 기존의 알고리즘들과 비교하였다. 제안된 알고리즘이 정규화되지 않은 기존의 알고리즘에 비하여 비정상 환경에서 우수한 성능을 가진다는 것을 보였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.173-174
• /
• 2014

Vibration disturbances generated by reaction wheels may cause serious problems in high precision pointing spacecraft missions. Implementation of vibration isolator is a practical solution to meet the high pointing stability requirement placed on precision payloads. In this paper, development of hybrid vibration isolator that combines passive and active component is described. Vibration isolation performance of the developed isolator is evaluated using reaction wheel disturbance model. Hybrid isolation results obtained using FxLMS algorithm show clear improvement compared to the results obtained using only passive means.

• 한국군사과학기술학회지
• /
• 제24권5호
• /
• pp.545-557
• /
• 2021

Engine is the main source of vibration that generates unwanted noise and vibration of vehicle chassis. Especially, in submarine applications, radiation of noise signatures can be detected at some distance away from the submarine using a sonar array. Thus quiet operation is crucial for submarine's survivability. This study addresses reduction of the force transmissibility originating from engines and transmitted to hull through engine mounts. An inertial damper, as an actuator of hybrid mount system, is addressed to reduce even further the level of vibration. Narrow band FxLMS algorithms are broadly used to cancel the vibration of engine mount because of its excellent performance of canceling narrow band noise. However, in real active dampers, the maximum displacement of damper mass is kinematically restricted. When the control input signal from the FxLMS algorithm exceeds this limitation, the damper mass will collide with the mechanical stops and results in many problems. Originated from these, a modified narrow band FxLMS algorithm based on the equalizer technique with the maximum allowable displacement of active damper mass is proposed in this study. Some simulation results showed that the propose algorithm is effective to suppress vibration of engine mount while ensuring given displacement constraint.

• 한국음향학회지
• /
• 제32권5호
• /
• pp.408-414
• /
• 2013

능동소음제어에서 널리 사용되는 FxLMS 알고리즘은 비정상 잡음환경에서 불안정하게 동작하는 경우가 있다. 이와 같은 문제를 해결하기 위하여, Sun과 Akhtar는 FxLMS 알고리즘의 갱신 과정에서 기준신호를 수정하는 방법을 제안하였다. 그러나 이들의 방법은 임펄스 노이즈가 발생할 경우 만족스러운 안정성을 보여주지 못하였다. 본 논문에서 제안된 알고리즘은 확률추정과 영교차율을 이용하여 능동소음제어의 안정성과 성능을 개선하였다. 또한 최적의 파라미터 선정을 위하여 퍼지 추론을 사용하였다. 제안된 방법의 실험결과 비정상 잡음환경에서 기존의 방법에 비하여 우수한 안정성과 빠른 수렴속도를 보여줬다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.357-363
• /
• 2009

This paper deals with the Filtered-x Least Mean Square algorithm for a active vibration control in vehicle vibration reduction. Before applying the proposed FxLMS algorithm to automobile, the performance of the FxLMS algorithm is simulated using sensor data of a vehicle. The FxLMS algorithm requires that reference signal be a representation of disturbance signal and the plant model be incorporated into the computation path. To this end, The system identification is carried out to obtain the plant model based on the measurement results. A tachometer signal is used as reference signal. The FxLMS control algorithm is first tested using simulation and applied to a vehicle. Experimental results show that the proposed control algorithm can reduce vibration level in a short period of time.

• 한국음향학회지
• /
• 제36권1호
• /
• pp.57-63
• /
• 2017

본 논문에서는 FxLMS(Filtered-x Least Mean Square) 알고리즘을 이용한 단일 센서 기반의 능동 반향음 제어 알고리즘을 제안한다. 제안 알고리즘은 먼저 단일 센서 입력 신호로부터 입사음과 반향음을 분리하고, 분리된 신호들을 사용하여 반향음과 반대 위상을 갖는 제어 신호를 생성한다. 제어 신호는 센서 위치에서 반향음과 중첩되어 반향음의 음압을 감소시킨다. 적절한 신호 분리를 위해 반향 음향 경로와 제어 음향 경로가 필요하며 이는 swept sine 신호를 이용해 측정한 음향 응답으로부터 사전에 구할 수 있다. 효용성을 검증하기 위해 DSP(Digital Signal Processing) 보드를 사용하여 제안된 알고리즘을 실시간으로 구현하였으며, 공기 중 음향 덕트 환경에서 1 kHz 버스트 신호에 대해 반향음이 11.6 dB 감소함을 확인 하였다.

• 한국소음진동공학회논문집
• /
• 제22권2호
• /
• pp.146-155
• /
• 2012

The filtered-x LMS(FX-LMS) algorithm has been applied to the active noise control(ANC) system in an acoustic duct. This algorithm is designed based on the FIR(finite impulse response) filter, but it has a slow convergence problem because of a large number of zero coefficients. In order to improve the convergence performance, the step size of the LMS algorithm was modified from fixed to variable. However, this algorithm is still not suitable for the ANC system of a short acoustic duct since the reference signal is affected by the backward acoustic wave propagated from a secondary source. Therefore, the recursive filtered-u LMS algorithm(FU-LMS) based on infinite impulse response(IIR) is developed by considering the backward acoustic propagation. This algorithm, unfortunately, generally has a stability problem. The stability problem was improved by using an error smoothing filter. In this paper, the recursive LMS algorithm with variable step size and smoothing error filter is designed. This recursive LMS algorithm, called FU-VSSLMS algorithm, uses an IIR filter. With fast convergence and good stability, this algorithm is suitable for the ANC system in a short acoustic duct such as the intake system of an automotive. This algorithm is applied to the ANC system of a short acoustic duct. The disturbance signals used as primary noise source are a sinusoidal signal embedded in white noise and the chirp signal of which the instantaneous frequency is variable. Test results demonstrate that the FU-VSSLMS algorithm has superior convergence performance to the FX-LMS algorithm and FX-LMS algorithm. It is successfully applied to the ANC system in a short duct.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.231-239
• /
• 2009

The filtered-x LMS (FX-LMS) algorithm has been applied to the active noise control (ANC) system in an acoustic duct. This algorithm is designed based on the FIR (finite impulse response) filter, but it has a slow convergence problem because of a large number of zero coefficients. In order to improve the convergence performance, the step size of the LMS algorithm was modified from fixed to variable. However, this algorithm is still not suitable for the ANC system of a short acoustic duct since the reference signal is affected by the backward acoustic wave propagated from a secondary source. Therefore, the recursive filteredu LMS algorithm (FU-LMS) based on infinite impulse response (IIR) is developed by considering the backward acoustic propagation. This algorithm, unfortunately, generally has a stability problem. The stability problem was improved by using an error smoothing filter. In this paper, the recursive LMS algorithm with variable step size and smoothing error filter is designed. This recursive LMS algorithm, called FU-VSSLMS algorithm, uses an IIR filter. With fast convergence and good stability, this algorithm is suitable for the ANC system in a short acoustic duct such as the intake system of an automotive. This algorithm is applied to the ANC system of a short acoustic duct. The disturbance signals used as primary noise source are a sinusoidal signal embedded in white noise and the chirp signal of which the instantaneous frequency is variable. Test results demonstrate that the FU-VSSLMS algorithm has superior convergence performance to the FX-LMS algorithm and FX-LMS algorithm. It is successfully applied to the ANC system in a short duct.

• 한국음향학회지
• /
• 제34권5호
• /
• pp.377-384
• /
• 2015

본 논문은 노이즈 캔슬링 헤드폰을 위한 능동 소음 제어 알고리즘을 제안한다. 제안 알고리즘은 피드백 구조의 filtered-x least mean square algorithm(FxLMS) 기반 능동 소음 제어 기술을 이용하여 외부에서 헤드폰 내부로 유입되는 소음을 제어한다. 이때 가변적인 2차 경로에 강인하게 대처하기 위해 지속적으로 2차 경로를 추정하는 잔여 음악제거기 기반의 온라인 2차 경로 추정 알고리즘을 이용한다. 실험을 통해 2차 경로가 변화하는 환경에서 제안 능동 소음제어 알고리즘은 기존 알고리즘들에 비해 음악 신호의 왜곡 없이 안정적으로 일관성 있는 소음 제어 성능을 보임을 확인하였다.

• 전기학회논문지P
• /
• 제64권3호
• /
• pp.169-174
• /
• 2015

Noise problem that occurs on the road is raising a lot of problems in the economic, social and environmental aspects. The active noise control (ANC) systems based on the filtered-X least mean square(FxLMS) algorithm have a problem with compensating the acoustic feedback of secondary route. However, newly proposed correlation-LMS(CLMS) and expanded CLMS algorithms have slightly much calculation and are minutely behind performance, these have a advantage not in measuring transfer function onerously so that we can easily adapt these in real time. The CLMS and expanded CLMS algorithm was developed to improve the real-time implementation performance under the variable input noise such as road noise environment. In this paper, we compared and analyzed their performance. From the results of the Matlab simulation for an ANC system, it is shown that expanded CLMS algorithms are more convergence speed and keep the desirable performance even in the input of road noise situation.