• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.640-643
• /
• 1997

This paper describes speed controller of a induction motor for electric vehicles using PLL and Fuzzy logic. The proposed system is combined precise speed control of PLL and robust, fast speed control of Fuzzy logic. The motor speed is adaptively incremented or decremented toward the PLL locking range by the Fuzzy logic using information of sampled speed errors and then is maintained accurately by PLL. The results of experiment show excellence of proposed system and that the proposed system is appropriates to control the speed of induction motor for electric vehicles.

• 한국자동차공학회논문집
• /
• 제2권5호
• /
• pp.23-29
• /
• 1994

The design procedure for fuzzy logic controller depends on the expert's knowledge or trial and error. Moreover, it is very difficult to guarantee the stability and robustness of the system due to the linguistic expression of fuzzy control. However, fuzzy logic control has succeeded in many control problems that the conventional control theory has difficulties to deal with. As a result, this control theory is applied to the engine control system which a mathematical model is difficult. In this study, the fuzzy logic is applied to obtain the gain of PI control at idle speed control system, and a simple engine model is developed in order to perform simulation. Experimental results show that the response to reach the target engine speed at idle speed control system is improved by adopting the gain obtained with fuzzy logic.

• 한국정보전자통신기술학회논문지
• /
• 제11권3호
• /
• pp.295-300
• /
• 2018

기존에 BLDC모터의 속도 제어 알고리즘으로는 PI 제어 알고리즘이 많이 사용되어왔다. PI 제어 알고리즘의 경우 다양한 속도 변화에 대한 속도와 토크의 응답 특성이 느려, 정상상태에 도달하는 것이 느리다는 단점이 있다. 따라서 본 논문에서는 오버슈트가 조금 있지만 응답 속도를 개선해 정상상태에 빠르게 도달할 수 있는 PWM 퍼지 논리 제어 알고리즘을 제안하였다. PWM으로 응답속도를 줄이고, 퍼지 논리 제어 알고리즘으로 오버슈트를 최소화하였다. 제안된 PWM 퍼지 논리 제어 알고리즘은 DC 초퍼, PWM 듀티 사이클 조정기, 퍼지 논리 제어기 등으로 구성했다. 제안된 알고리즘의 성능과 타당성은 Matlab 2018a의 Simulink를 이용한 시뮬레이션을 통해 입증하였다.

• Journal of Power Electronics
• /
• 제12권2호
• /
• pp.305-316
• /
• 2012

The paper presents an accurate loss model based controller of an induction motor to calculate the optimal air gap flux. The model includes copper losses, iron losses, harmonic losses, friction and windage losses, and stray losses. These losses are represented as a function of the air gap flux. By using the calculated optimal air gap flux compared with rated flux for speed sensorless indirect vector controlled induction motor, an improvement in motor efficiency is achieved. The motor speed performance is improved using a fuzzy logic speed controller instead of a PI controller. The fuzzy logic speed controller was simulated using the fuzzy control interface block of MATLAB/SIMULINK program. The control algorithm is experimentally tested within a PC under RTAI-Linux. The simulation and experimental results show the improvement in motor efficiency and speed performance.

• 조명전기설비학회논문지
• /
• 제28권6호
• /
• pp.30-39
• /
• 2014

Through a lot of papers, it has been concluded that fuzzy logic controller is superior to PI controller in motor speed control. Although fuzzy logic controller is superior to PI controller in motor speed control, the gain tuning of fuzzy logic controller is more complicated than that of PI controller. In this paper, using mathematical analysis of the PI and fuzzy controller, the design method of the fuzzy controller that has the same characteristics with the PI controller is proposed. After that, we can design the fuzzy controller that has superior performance than PI controller by changing the envelope of input of fuzzy controller to nonlinear, because the fuzzy controller has more degree of freedom to select the control gain than PI controller. The advantage of fuzzy logic controller is shown through mathematical analysis, and the simulation result using Matlab simulink has been proposed to show the effectiveness of these analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1750-1752
• /
• 2005

This paper presents a variable speed wind generation system where fuzzy logic controllers is used as efficiency optimizer. The fuzzy logic controller increments the machine flux by on-line search to improve the generator efficiency in case of light load. The speed of the induction generator is controlled according to the variation of the wind speed in order to produce the maximum output power The generator reference speed is adjusted according to the optimum tip-speed ratio. The complete control system has been developed by simulation study.

• 한국정보전자통신기술학회논문지
• /
• 제11권5호
• /
• pp.481-486
• /
• 2018

DC 모터는 브러시 구조가 있는 DC 모터와 브러시 구조가 없는 BLDC(Brushless DC) 모터로 분류된다. BLDC 모터는 DC 모터의 브러시가 없이 정류를 전자적으로 수행하는 모터로 BLDC 모터의 속도제어를 대표하는 것은 PI 제어이다. PI 제어기를 이용한 속도제어는 정상상태에 도달하는 응답 특성이 느리다는 단점을 가지고 있다. 이를 보완하기 위해 정상 상태까지 도달하는 시간이 짧고 비선형 제어에도 쉽게 제어가 가능한 FLC(Fuzzy Logic Controller)를 이용해 전압을 가감하는 방식의 전압 제어 속도 제어기 제안하였다. 제시한 퍼지 속도 제어기의 타당성과 유용성은 MATLAB 프로그램의 Simulink를 통해 모의실험으로 입증하였다. 모의실험은 기준 속도를 500rpm, 800rpm, 1500rpm의 3가지 경우로 각각 PI 제어기와 제안한 퍼지 속도 제어기를 실험하였다. 실험 결과 제안한 퍼지 속도 제어기가 30% 정도 개선된 정상 상태 속도 응답 특성을 보이며 PI 제어기에 비해서 빠른 속도 응답 특성을 갖고 있음을 입증하였다.

• 한국안전학회지
• /
• 제14권1호
• /
• pp.55-65
• /
• 1999

Fuzzy logic fuzzy set theory is recently getting increasing emphasis in process control applications. This paper describes application of fuzzy logic in a speed control system that uses a phase controlled bridge converter and a separately excited dc motor. The fuzzy control is used to linearize the transfer characteristics of the converter in discontinuous conduction mod occurring at light load and high speed. The fuzzy control is then extended to the current and speed control loops replacing the conventional PI control method. The control algorithms have been developed in detail and verified by simulation of a DC motor(DM) drive system. The simulation result indicates the superiority of fuzzy control over the conventional control methods. Fuzzy logic seems to have a lot of promise in the applications of power electronics.

• 한국지능시스템학회논문지
• /
• 제5권2호
• /
• pp.3-12
• /
• 1995

A controller utilizing fuzzy logic is developed to control the speed of a motor in a washing machine by choosing an appropriate phase. Due to the hardship imposed on obtaining a result from a relation established for inputs, present speed and present rate of speed, and ouput, a phase, of the system that can be tested against an experimental result, it is impossible to apply a genetic algorithm to fine-tune the fuzzy logic controller. To avoid this difficulty, a proper assumption that the parameters of an if-part of a primary fuzzy logic controller have a functional relationship with an error between computed values and experimental ones in made. Setting up of a fuzzy relationship between the parameters and the errors is then achieved through experimentally obtained data. Genetic Algorithm is then applied to this secondary fuzzy logic controller to verify the fuzzy logic. In the verification process, the primary fuzzy logic controller is used in obtaining experimental results. In this way the kind of difficulty in obtaining enough experimental values used to verify the fuzzy logic with genetic algorithm is gotten around. Selection of the parameters that would produce the least error when using the secondary fuzzy logic controller is done with applying genetic algorithm to the then-part of the controller. In doing so the optimal values for the parameters of the if-part of the primary fuzzy logic controller are assumed to be contained. The experimental result presented in the paper validates the assumption.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 추계학술대회
• /
• pp.285-286
• /
• 2011

Maximum Power Point Tracker (MPPT) is the big issue in generating power based on Wind Energy Conversion System. In case of unknown turbine characteristic, it is useful to implement MPPT based on fuzzy logic control. This kind of control is able to find the value of duty cycle to meet maximum power point at particular wind speed. There are many methods to develop MPPT based fuzzy logic controls. In this paper, two of the methods are compared both at low and high fluctuating wind speed.