• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.666-669
• /
• 2008

Droplet in miniaturized microfluidic systems have received much focused attention recently. In this work, electrical charging phenomenon of a conducting water droplet on the electrode under the dc electric field is studied and using this phenomenon droplet actuation method for microreactor applications is experimentally demonstrated. To find effects of key factors, the effects of electric field, medium viscosity, and droplet size are investigated. A scaling law of charging for the conducting droplet is derived from the experimental results. Unlike the case of a perfect conductor, the estimated amount of electrical charge ($Q_{est}$) of a water droplet is proportional to the 1.59 power of the droplet radius (R) and the 1.33 power of the electric field strength (E). (For a spherical perfect conductor, Q is proportional to R2 and E.) It is thought that the differences are mainly due to incomplete charging of a water droplet resulted from the combined effect of electrochemical reaction at electrode and the relatively low conductivity of water. Using this phenomenon, we demonstrate the transport of the charged droplet and fusion of two oppositely-charged droplets. When electric field is subjected sequentially on the electrode, the charged droplet is transported on the electrode. For the visualization of fusion of charged droplets, the precipitation reaction is used. When subjected to a DC voltage, two droplets charged are moving and merging toward each other due to the Coulombic force and chemical reaction is simultaneously occurred by coalescence of droplets. It may be due to the interchange effect of charge. It is shown that the droplet can be used for microreactor where transporting, merging etc. of reagents constitute unit operation.

• 한국멀티미디어학회논문지
• /
• 제20권2호
• /
• pp.179-187
• /
• 2017

The fourth industrial revolution is a phenomenon where productivity is improved in each field by the convergence of IT technology and existing industries. In the dental treatment process, prosthetic treatment time is drastically shortened through AI and expert software. Oral imaging, prosthesis design, and prosthesis manufacturing are performed continuously, so the treatment can be completed in a few hours. In this paper, we introduce the research trend of multimedia technology in the prosthetic process. We also propose a new method for accelerating the fusion of surface data during the optical impression. Proposed method enables high-speed optical impression and accelerates the overall automated production process of dental prosthesis.

• 반도체디스플레이기술학회지
• /
• 제18권4호
• /
• pp.129-133
• /
• 2019

In this paper, we developed a system to monitor the storage capacity of suction-type device such as vacuum cleaner or crop harvesters. The monitoring system consists of load cells and a differential pressure sensor which simultaneously monitor the weight and volume of the stock. Since weighing objects stored in storage containers alone cannot fully monitor the level of filling, more accurate monitoring can be achieved by monitoring volume and fusion with weight information. The volume was monitored using a phenomenon in which the flow rate of the inhaled air varies depending on the volume of the object filled in the storage container. In this paper, we developed a system to monitor the storage in three stages: low, medium and high.

• 복식
• /
• 제59권5호
• /
• pp.19-40
• /
• 2009

The purpose of this study is to grasp the world of Galliano works who lead Dior Couture and to make use of this knowledge to comprehension of general trend in Haute Couture and $pr{\hat{e}}t-{\acute{a}}$-porter in the future. The method of research is to search for the characteristic of Haute Couture and the general tendency of Galliano works, and to view the inclination of Dior Couture by Galliano. For sphere of research, 2000s is discussed with focus on Haute Couture, exclusive of ready-to-wear. As a result, Galliano's Couture works were distinguished into four specificities. First, the historicity including historical event, personage and epoch. Second, the orientalism. Third, the pictorial characteristic including synthetic art and public art. Forth, the quality of humor. These subjects bring about a result that break down each boundary, in the method of interpreting, as try out mixing between every elements. Galliano pursue a new domain through the fusion of East and West, past and present, classic and pop, artistry and commercialism, this induce more familiar Haute Couture to the public, breaking the strict form of Couture. It seems that this tendency will be advanced toward extrovert Couture producing the low-age phenomenon in Couture, the mixture of multi-culture and the vitality. This fusion suggest the popularity and the commerciality of Couture, which is predicted decrease the difference between Couture and $pr{\hat{e}}t-{\acute{a}}$-porter.

• 대한치과교정학회지
• /
• 제11권2호
• /
• pp.57-64
• /
• 1981

The purpose of this study was to investigate the effect of hydrocortisone in the fusion mechanism of the secondary palatine shelves in the rat. Pregnant rats were injected with 5.0 mg/100 gm body weight of hydrocortisone for 3 days between the 7th day and the 9th day of pregnancy. Between the 14th day md the 18 day of pregnancy, the fetuses were removed and decapitated to be immersed in $10\%$ formalin and Carney's solution. Preparations were stained with alizarin red S, hematoxylin-eosin and alcian blue respectively, and partly were treated for Periodic acid-Schiff reaction. The results were as followings: 1. The incomplete fusion of the palatal epithelium took place though the polarity of epithelial cells. 2. At the edge of shelves the differentiation of mesenchymal cells was observed, but the inter penetration of mesenchyme was not shown. 3. It was considered that the phenomenon of hypocalcification in matrix had relation to the decrease stainability to alizarin red S in shelves. 4. It might be concluded that the connective tissue under epithelium showed the decrease tendency to alcian blue and PAS reaction due to the inhibition of the synthesis of the mucopolysaccharide.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.1155-1160
• /
• 2008

In the present study investigated the heat dissipation characteristics of the natural convection type radiator by using the latent heat from a solid-liquid PCM(Phase Change Material). Total radiator volume size is $423{\times}295{\times}83\;mm$ and PCM tank size is $398{\times}270{\times}26\;mm$. The objective was elapsed time lower than maximum operating temperature. Experimental condition, in order to study the effects of the phase-change phenomenon, carried out the various mass flow rate, input electric power, and heat of fusion temperature of two type PCMs. For the above experimental conditions, the cooling performance by using the latent heat showed that heat absorption rate performs for about 3 hours from using PCM $38^{\circ}C$. However, cooling performance by using PCM $50^{\circ}C$ showed higher than surface temperature of heater block because of heat of fusion.

• 로봇학회논문지
• /
• 제14권3호
• /
• pp.170-178
• /
• 2019

This paper proposes a parking space detection method for autonomous parking by using the Around View Monitor (AVM) image and Light Detection and Ranging (LIDAR) sensor fusion. This method consists of removing obstacles except for the parking line, detecting the parking line, and template matching method to detect the parking space location information in the parking lot. In order to remove the obstacles, we correct and converge LIDAR information considering the distortion phenomenon in AVM image. Based on the assumption that the obstacles are removed, the line filter that reflects the thickness of the parking line and the improved radon transformation are applied to detect the parking line clearly. The parking space location information is detected by applying template matching with the modified parking space template and the detected parking lines are used to return location information of parking space. Finally, we propose a novel parking space detection system that returns relative distance and relative angle from the current vehicle to the parking space.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.637-639
• /
• 2003

As the number of spectral bands of high spectral resolution data increases, the capability to detect more detailed classes should also increase, and the classification accuracy should increase as well. Often, it is impossible to access enough training pixels for supervise classification. For this reason, the performance of traditional classification methods isn't useful. In this paper, we propose a new model for classification that operates based on decision fusion. In this classifier, learning is performed at two steps. In first step, only training samples are used and in second step, this classifier utilizes semilabeled samples in addition to original training samples. At the beginning of this method, spectral bands are categorized in several small groups. Information of each group is used as a new source and classified. Each of this primary classifier has special characteristics and discriminates the spectral space particularly. With using of the benefits of all primary classifiers, it is made sure that the results of the fused local decisions are accurate enough. In decision fusion center, some rules are used to determine the final class of pixels. This method is applied to real remote sensing data. Results show classification performance is improved, and this method may solve the limitation of training samples in the high dimensional data and the Hughes phenomenon may be mitigated.

• ETRI Journal
• /
• 제45권5호
• /
• pp.847-861
• /
• 2023

Dynamic object detection is essential for ensuring safe and reliable autonomous driving. Recently, light detection and ranging (LiDAR)-based object detection has been introduced and shown excellent performance on various benchmarks. Although LiDAR sensors have excellent accuracy in estimating distance, they lack texture or color information and have a lower resolution than conventional cameras. In addition, performance degradation occurs when a LiDAR-based object detection model is applied to different driving environments or when sensors from different LiDAR manufacturers are utilized owing to the domain gap phenomenon. To address these issues, a sensor-fusion-based object detection and classification method is proposed. The proposed method operates in real time, making it suitable for integration into autonomous vehicles. It performs well on our custom dataset and on publicly available datasets, demonstrating its effectiveness in real-world road environments. In addition, we will make available a novel three-dimensional moving object detection dataset called ETRI 3D MOD.

• Korean Chemical Engineering Research
• /
• 제55권4호
• /
• pp.561-566
• /
• 2017

폴리머 재질의 관을 융착 시키기 위해서는 버트 융착 공정을 거치는데, 최근 융착면에 굴곡을 주어 융착 강도를 높이고자 하는 시도가 있었다. 본 연구에서는 융착면의 굴곡이 폴리머의 열유체 거동 및 융착 강도에 어떠한 영향을 미칠 것인지 2차원 축대칭 평면에서 유한요소법을 사용하여 살펴보았으며, 고밀도폴리에틸렌 관을 대상으로 하였다. 열유화 단계에서 융착면의 형상을 따라 굴곡진 상경계면이 나타남을 확인할 수 있었다. 접합 단계에서는 굴곡진 상경계면과 융착면 사이에서의 멜트의 압착 흐름이 나타남을 확인할 수 있었으며, 굴곡융착부의 낮은 전단율은 관의 축과 수직 방향 배향을 완화시켜 융착부 강도 향상에 도움을 줄 수 있을 것으로 예상된다.