• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.1
• /
• pp.58-63
• /
• 2019

Lithium-ion batteries used for IT, automobiles, and industrial energy-storage devices have battery management systems (BMS) to protect the battery from abnormal voltage, current, and temperature environments, as well as safety devices like, current interruption device (CID), fuse, and vent to obtain positive temperature coefficient (PTC). Nonetheless, there are harmful to human health and property and damage the brand image of the manufacturer because of smoke, fire, and explosion of lithium battery packs. In this paper, we propose a systematic protection algorithm combining battery temperature, over-current, and interconnection between protection elements to prevent copper deposition, internal short circuit, and separator shrinkage due to frequent and instantaneous over-current discharges. The parameters of the proposed algorithm are suggested to utilize the experimental data in consideration of battery pack operating conditions and malicious conditions.

• Journal of Digital Convergence
• /
• v.19 no.4
• /
• pp.285-289
• /
• 2021

Traditional Chinese patterns are known for their unusual and attractive visual symbols with unique artistic characteristics and practical values.In mobile game UI design, traditional Chinese pattern has important meaning and value in interface design.The research aims to extract elements of traditional Chinese patterns and apply them to the design of mobile game UI, and better fuse traditional patterns into the design of mobile phone UI.Through literature analysis on traditional Chinese patterns and mobile UI interface case analysis, we learned the design principles and design methods of traditional Chinese pattern elements in mobile game UI.

• Fisheries and Aquatic Sciences
• /
• v.19 no.4
• /
• pp.20.1-20.12
• /
• 2016

The osteological development in Sebastes koreanus is described and illustrated on the basis of 32 larvae [6.11-11.10 mm body length (BL)] and a single juvenile (18.60 mm BL) collected from the Yellow Sea. The first-ossified skeletal elements, which are related to feeding, swimming, and respiration, appear in larvae of 6.27 mm BL; these include the jaw bones, palatine, opercular, hyoid arch, and pectoral girdle. All skeletal elements are fully ossified in the juvenile observed in the study. Ossification of the neurocranium started in the frontal, pterotic, and parietal regions at 6.27 mm BL, and then in the parasphenoid and basioccipital regions at 8.17 mm BL. The vertebrae had started to ossify at ~7.17 mm BL, and their ossification was nearly complete at 11.10 mm BL. In the juvenile, although ossification of the pectoral girdle was fully complete, the fusion of the scapula and uppermost radial had not yet occurred. Thus, the scapula and uppermost radial fuse during or after the juvenile stage. The five hypurals in the caudal skeleton were also fused to form three hypural elements. The osteological results are discussed from a functional viewpoint and in terms of the comparative osteological development in related species.

• Earthquakes and Structures
• /
• v.8 no.3
• /
• pp.699-712
• /
• 2015

Bracing structures with off-centre bracing system is one of the new resistant systems that frequently used in the frame with pin connections. High ductility, high-energy dissipation and decrease of base shear are advantages of this bracing system. However, beside these advantages, reconstruction and hard repair of off-centre bracing system cause inappropriate performance in the earthquake. Therefore, in this paper, the goal is investigating the behavior of this type of bracing system with ductile element (circular dissipater), in order to providing replacement of damaged member without needing repair or reconstruction of the general system. To achieve this purpose, some numerical studies have been performed using ANSYS software, a frame with off-centre bracing system and optimum eccentricity (OBS-C-O) and another frame with the same identifications without ductile element (OBS) has been created. In order to investigate precisely on the optimum placement of circular elements under monotonic load again three steal frames were modeled. Furthermore, the behavior of this general system investigated for the first time, linear and nonlinear behavior of these two steel frames compared to each other, to achieve the benefit of using the circular element in an off-centre bracing system. Eventually, the analytical results revealed that the performance of steel ring at the end of off-centre braces system illustrating as a first defensive line and buckling fuse in the off-centre bracing system.

• Journal of the Korean Society of Safety
• /
• v.32 no.6
• /
• pp.22-28
• /
• 2017

According to the National Fire Data System (NFDS), more than 5,000 vehicle fires have occurred every year for the last 10 years. Vehicle fires are primarily caused by mechanical (breaking system and engine), electrical (wiring and battery), and chemical (oil and fuel gas leakage) problems. The electrical factor has increased with the installation of driver convenience equipment. For example, today, the black box is widely used to provide video data recording of motor vehicle accidents. The black box consists of a front camera, rear camera, and wires. The black box wires are directly connected to the junction box or fuse box from the start battery that operates to provide normal on power supplying for engine stop. It is extremely dangerous when the wires short circuit due to insulation aging, mechanical and electrical stress, etc. In this study, the black box wiring fire risk have been analyzed and investigated when the steady state and abnormal operations, and under the following conditions: wiring arrangements with a high temperature condition, insulation aging, poor contact, and short circuits. The results showed that black box wiring short circuits had a higher fire risk than the other fire hazard elements. To prevent fire hazards caused by black box wiring, the black boxes must be installed by qualified service personnel. Do not modify the wiring, remove the fuse and secure the wiring using cable ties or insulation tape.

• Korean Journal of Head & Neck Oncology
• /
• v.24 no.1
• /
• pp.80-82
• /
• 2008

Epidermoid cysts can be found anywhere in the body, particularly in areas where embryonic elements fuse together. Most cases have been reported in the ovaries, the testicles, as well as the hand and feet. Epidermoid cysts in mouth are uncommon and account for less than 0.01% of all oral cysts. The treatment of choice is complete surgical excision and prognosis is excellent. The purpose of this article is to describe two cases of an epidermoid cyst in the oral cavity mucosa and a review of the literature.

• Journal of Chest Surgery
• /
• v.45 no.6
• /
• pp.415-417
• /
• 2012

The development of Morgagni hernias is related to malformations of the embryologic septum transversum after failure of the sternal and costal fibrotendinous elements of the diaphragm to fuse. The overall incidence of Morgagni hernias among all congenital diaphragmatic defects is 3% to 4%. Inguinal hernias are the most common hernias in males and females (25% and 2%, respectively). An inguinal hernia is defined as a protrusion of the abdominal cavity contents through the inguinal canal. The combination of Morgagni and inguinal hernias is rare, and treatment using laparoscopic surgery has not been previously reported. This case presents a one-stage laparoscopic repair of Morgagni and inguinal hernias in a 2-month-old male.

• Journal of the Korean Society of Safety
• /
• v.26 no.6
• /
• pp.13-19
• /
• 2011

The purpose of this study is to examine the cause of damage to electrolytic capacitors and to present the heat generation mechanism in order to prevent the occurrence of similar problems. From the analysis results of electrolytic capacitors collected from accident sites, the fire causing area can be limited to the primary power supply for the initial accident. From the tests performed by applying overvoltage, surge, etc., it is thought that the fuse, varistor, etc., are not directly related to the accidents that occurred. The analysis of the characteristics using a switching regulator showed that the charge and discharge characteristics fell short of standard values. In addition, it is thought that heated electrolytic capacitors caused thermal stress to nearby resistances, elements, etc. It can be seen that the heat generation is governed by the over-ripple current, application of AC overvoltage, surge input, internal temperature increase, defective airtightness, etc. Therefore, when designing an electrolytic capacitor, it is necessary to comprehensively consider the correct polarity arrangement, appropriate voltage application, correct connection of equivalent series resistance(ESR) and equivalent series inductance(SEL), rapid charge and discharge control, sufficient margin of dielectric tangent, etc.

• Journal of Conservation Science
• /
• v.38 no.1
• /
• pp.55-63
• /
• 2022

The Bigyeokjincheolloe (bomb shell), a scientific cultural heritage, has outstanding historical value for sustaining a gunpowder weapon of Joseon. In this study, the bomb shell was modeled through three-dimensional (3D) scanning centered on the external shape and 𝛾-ray radiography-based on the internal shape. In particular, to improve the contrast in the radiographic image, optimization and image processing were performed. After these processes, the thickness of the inner wall (2.5 cm on average) and the positions of the three mold chaplets were clearly revealed. For exhibition purposes, the 3D model of the bomb shell was output to a 3D printer and the output was rendered realistic by coloring. In addition, the internal functional elements, such as Mokgok, fuse, mud, gunpowder, and caltrops, were reproduced through handwork. The results will contribute to the study of digital heritages in two ways. First, the internal and external shapes of the bomb shell were modeled by fusing two different technologies, namely, 3D scanning and 𝛾-ray radiography. Second, the internal shape of the bomb shell was constructed from the original form data and the reproduction was utilized for museum exhibitions. The developed modeling approach will greatly expand the scope of museum exhibitions, from those centered on historical content to those centered on scientific content.

• Steel and Composite Structures
• /
• v.45 no.5
• /
• pp.683-695
• /
• 2022

Conventional braces are often used to provide stiffness to structures; however due to buckling they cannot be used as seismic energy dissipating elements. In this study, a seismic energy dissipation device is proposed which is comprised of a bracing member and a steel hysteretic damper made of steel hexagonal plates. The hexagonal shaped designated fuse causes formation of plastic hinges under axial deformation of the brace. The main advantages of this damper compared to conventional metallic dampers and buckling-restrained braces are the stable and controlled energy dissipation capability with ease of manufacture. The mechanical behavior of the damper is formulated first and a design procedure is provided. Next, the theoretical formulation and the efficiency of the damper are verified using finite element (FE) analyses. An analytical model of the damper is established and its efficiency is further investigated by applying it to seismic retrofit of a case study structure. The seismic performance of the structure is evaluated before and after retrofit in terms of maximum interstory drift ratio, top story displacement, residual displacement, and energy dissipation of dampers. Overall, the median of maximum interstory drift ratios is reduced from 3.8% to 1.6% and the residual displacement decreased in the x-direction which corresponds to the predominant mode shape of the structure. The analysis results show that the developed damper can provide cost-effective seismic protection of structures.