• 대한기계학회논문집B
• /
• 제37권2호
• /
• pp.187-196
• /
• 2013

화력발전용 관류보일러 화로벽관에서의 밀도파 불안정 예측을 목적으로 수치모델을 개발하였다. 시간 도메인에서 1 차원 유한체적법을 적용하여 관내 비정상상태의 유동장을 계산하였으며, 화로벽관의 평행관 연결을 모사하기 위해 헤더의 모델도 포함하였다. 평행관들 가운데 하나의 관에 열 섭동을 부가 후 관 입출구 유량의 변동을 관찰함으로써 밀도파 불안정을 찾았다. 개발된 모델은 문헌의 실험결과와 검증을 거쳐 700MW 보일러 화로벽관에 적용하였다. 그 결과 Takitani 의 실험결과에서는 평행으로 연결된 우회 유량이 줄어들수록 불안정 경계 열량이 상승하는 경향이 있었던 반면, 보일러 화로벽관의 경우에는 평행관 모델링에 크게 영향을 받지 않음을 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.788-793
• /
• 2001

Finite element analysis was carried out to investigate the integrity and reliability of boiler module during sea transportation. The boiler module was supported by steel structure to relieve the instantaneous shock from oceanic wave and its primary parts were strengthened with several reinforcements. Finned tube walls which were used in the furnace wall were assumed as orthotropic plates having equivalent material properties. The bank tubes were also equivalently modeled in accordance with ASME B31.1 for the convenience of finite element modeling. The calculation results were compared with the yield stress of the material. In particular, the bank tube stress, which was evaluated by converting the calculated stresses in equivalent tubes into those in original tubes by using the ratio of diameter, was also examined with yield stress.

• Progress in Superconductivity
• /
• 제7권1호
• /
• pp.97-101
• /
• 2005

Bi-22l2 tubes for fault current limiter (FCL) were fabricated by centrifugal melting process. $SrSO_4$ ($10\;wt.\;\%$) was added to Bi-2212 powder to lower the melting point of Bi-22l2 and to improve the mechanical properties. The BSCCO powder was completely melted at $1300\;^{\circ}C$ using the RF furnace and then poured into rotating steel mold. The steel mold, preheated at $450\;{\circ}C{\sim}550^{\circ}C$ for 2 hour was rotated at $1020{\sim}2520\;RPM$. The solidified BSCCO tube was cooled down to room temperature in the furnace for 48 hours and separated from the mold between Bi-2212 and the mold. $ZrO_2$ solution was used to separate it easily from the mold and Ag tape was attached in the mold inner wall of the mold to analysis electrical property. Bi-22l2 tube was often cracked when the cooling rate was high. BSCCO tubes with $70{\Phi}{\times}100\;mm,\;50{\Phi}{\times}100\;mm$ and $30{\Phi}{\times}150\;mm$ size were fabricated by centrifugal melting process. The $J_{c}s$ of tubes with $50{\Phi}{\times}100\;mm{\times}4.0\;t$ and $50{\Phi}{\times}100\;mm{\times}4.l\;t$ were 178 and $74.2\;A/cm^2$ at 77K, respectively. The processing condition for Bi-2212 tube fabrication was investigated using XRD and SEM analyses.