• Proceedings of the Korean Magnestics Society Conference
• /
• 2008.12a
• /
• pp.161.1-161.1
• /
• 2008

• Food Science and Industry
• /
• v.53 no.4
• /
• pp.366-373
• /
• 2020

Due to environmental changes such as diet and fine dust, the public has a growing interest in health. With the growing interest in health, consumption of health functional foods to prevent diseases has increased, and the health functional food market is also growing. However, most health functional foods rely on imported raw materials, and the development of health functional foods using domestic raw materials is urgently needed. Therefore, in this paper, provides information on functional raw materials for health functional foods that have been recognized by using domestic agricultural products in Rural Development Administration, and insists that R&D should be more active in order to increase more domestic raw materials in the health functional food market in the future.

• Journal of the Korean Ceramic Society
• /
• v.52 no.5
• /
• pp.338-343
• /
• 2015

To prevent an interfacial reaction between the anode and the electrolyte layer during the conventional high-temperature co-firing process, an anode-supported type cell with a thin-film electrolyte was fabricated by low-temperature ceramic thick film coating process. Ni-GDC cermet composite was used as the anode material and YSZ was used as the electrolyte material. Open circuit voltage and maximum power density were found to strongly depend on the surface uniformity of the anode functional layer. By optimizing the microstructure of the anode functional layer, the open circuit voltage and maximum powder density of the cell increased to 1.11 V and $1.35W/cm^2$, respectively, at $750^{\circ}C$. When a GDC barrier layer was applied between the YSZ electrolyte and the LSCF cathode, the cell showed good stability, with almost no degradation up to 100 h. Anode-supported type SOFCs with high performance and good stability were fabricated using a coating process.

• Particle and aerosol research
• /
• v.9 no.3
• /
• pp.127-132
• /
• 2013

Recently, Aerosol Deposition method has attracted considerable attention because of its advantages to produce ceramic coatings on various substrates at room temperature. This method is strongly dependent on the raw powder, which should have high mobility with carrier gas and moderate mechanical strength to be crushed onto the substrate. In this report, the effects of the ceramic granules' compressive strength on the ceramic coating formation are discussed. The ceramic granules were prepared by spray-drying method and heat treated at various temperatures. It was found that at the moderate mechanical strength of ceramic granules gave more effective film formation behavior during Aerosol Deposition method.

• Korean Journal of Human Ecology
• /
• v.18 no.1
• /
• pp.145-155
• /
• 2009

The purpose of this study is to examine the university students' awareness and attitudes on functional clothing materials, and to explore the effects of subjects' characteristics on the relationship between their attitudes to and images of the functional clothing materials. A total of 500 questionnaires were distributed to university students and 409 of which were used in data analysis. The data were statistically analyzed by frequency, factor analysis, reliability analysis, correlation analysis, t-test, ANOVA. The results were as follows: students thought that the first and foremost 'function' of functional clothing materials is their light-weight. The functions that consumers practically demanded are water-repellency and high absorbency & quick drying. It showed that students have an image that functional clothing materials have special, good and satisfactory qualities. Goretex and Coolmax were the most selected as brands of functional clothing materials which students knew. Attitudes to functional clothing materials revealed positively in the cognitive, behavioral and affectional attitudes. The attitudes had no significant differences according to sex and their major, but they had significant differences by subjects' amount of allowance, frequency of sports participation and sports ability. In other words, the more amount of allowance they get, the more frequently students do exercise, and the higher sports ability they have, the more positive attitude they have. The study says, in conclusion, that their conception of functional clothing materials has positive relations with their attitudes toward them.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.04a
• /
• pp.181-184
• /
• 2003

GaN계 청색 여기용 광원으로 최적인 $Y_{3}AI_{5}O_{12}:Ce$계 phosphor를 고상반응으로 제조하여 white LED용 yellow 형광체로 신뢰성을 검토하였다. 출발시료는 metal hydrous oxide로 합성한 분말에 활성제로서 $Ce^{3+}$ 이온의 농도를 변화시키면서 로내의 온도와 시간을 변수로 하여 형광체를 제조하였다. 그 결과 $1650^{\circ}C$에서 2시간 소성시킨 분말의 경우, 입자 크기가 $3{\mu}m$이하인 순수 YAG 형광체를 얻을 수 있었으며 $Ce^{3+}$이온농도를 변화시킨 결과 0.03~0.05mol% 일 때가 가장 우수하여 해외제품수준을 능가하는 우수한 발광특성을 나타내었다. 이때 CIE1931 색좌표 값은 x=0.385, y=0.433으로서 green yellow 색을 나타내었다.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.6
• /
• pp.1841-1844
• /
• 2014

• 한국초전도학회:학술대회논문집
• /
• v.11
• /
• pp.68-68
• /
• 2001

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.180-180
• /
• 2010

본 연구에서는 P-Type의 NiO를 Glass기판의 ITO전극위에 RF-스퍼터링 방법으로 증착하였으며, NiO 완충층의 두께 변화에 따른 OLED (Organic Light Emitting Diode) 소자의 발광 특성에 대해 연구하였다[1, 2]. NiO는 우수한 전기 광학적 특성을 가지고 있어 OLED소자의 구동전압, 발광 효율 등의 특성을 향상 시킬 수 있다[3]. NiO 완충층의 두께 변화는 스퍼터링 증착시간을 통해 5-20 nm로 조절하였으며 소자의 구조는 Glass/ITO/NiO(0~20nm)/NPB(40nm)/Alq3(60nm)/LiF(0.5nm)/Al(120nm)형태로 제작하였다. ITO/NPB 계면에 NiO 완충층을 삽입함으로써 OLED 발광소자의 구동전압을 ~8V에서 ~5V (NiO, 10nm)로 낮출 수 있었다.

• International Journal of Concrete Structures and Materials
• /
• v.18 no.3E
• /
• pp.165-171
• /
• 2006

Environment-friendly materials are increasingly used as building construction materials nowadays, and the market share of those is growing. Accordingly, the research and developments in terms of environmental value are progressing steadily now. The main characteristics of environmental products are far-infrared radiation, negative-ion emission, electromagnetic wave shielding, and antimicrobial property. These products are often used in mortar and as spray on the finishing material. Nevertheless, there are hardly any research on the functional properties of concrete, the main material in construction field. Thus, we evaluated such basic properties of concrete as slump, compressive strength and air content while using such functional materials as sericite, wood-pattern sandstone, carbon black and nano-metric silver solution to focus on their functional properties like far-infrared radiation, negative ion emission, electro magnetic wave shielding, and antimicrobial activity in this research. The results indicated that the most useful material in the functional materials was carbon black. Sericite and nano-metric silver solution had a little effect on the functional property. Moreover, although wood-pattern sandstone had very high functional property, it exhibited too low compressive strength to be applied, to concrete as a factory product. Antimicrobial property of nano-metric silver solution in the concrete was not clear demonstrated, but if these specimens were to be aged in $CO_2$ gas for a long time, it might be apparent.