• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 춘계학술대회 논문집
• /
• pp.244-247
• /
• 1996

We had experiment using LB method that can fabricate molecular order ultra-thin film below 100${\AA}$. LB method has known as main technology of information society in 21C, because it is not only free orientation and alignment of molecular but also ability of thickness control as molecular order. In this paper, the fabricated condition and physical properties of functional ultra-thin film of molecular order was investigated and highly efficient ultra-thin film capacitor was fabricated by using ultra-thin LB film for application as electronic device. Possibility of ultra-thin film capacitor was researched by analyzing and measuring electrical properties. Polyimide ultra-thin LB film capacitor was fabricated, ensured theoretically and experimentally its possibility in range of 10Hz∼lMHz through its frequency characteristics.

• 대한의생명과학회지
• /
• 제26권4호
• /
• pp.360-367
• /
• 2020

Tuna skin byproduct extract (TSB) was used as a biocompatibility film base material, and its composite film with gellan gum (GG) was prepared. In addition, Pinus thunbergii cone extract (PTCE) was incorporated into the film to provide anti-oxidant and anti-bacteria activities. The tensile strength (TS) of the TSB/GG composite films increased with increasing GG content, whereas elongation at break (E) decreased. TSB/GG film at a ratio of 0.5:0.5 (w/w) showed the most desirable TS and E values. Based on scavenging free radical potentials and disc diffusion method results against growth of bacteria, antioxidant and anti-bacteria activities of films increased with increasing PTCE concentration. Accordingly, this study showed that TSB/GG could be used as a film material while the TSB/GG composite film containing PTCE can be utilized as functional packaging.

• 한국식품저장유통학회지
• /
• 제14권1호
• /
• pp.105-108
• /
• 2007

거창과 서울에 거주하는 소비자로 20대부터 60대까지 남녀 280명을 대상으로 MA 필름으로 포장한 포장구 사과와 포장하지 않은 대조구 사과의 신선함, 단맛, 신맛, 향미, 아삭거림, 씹힘성, 구매의사에 대한 기호도를 조사한 결과 20대에서 신선함, 아삭거림, 씹힘성과 구매의사에서 대조구보다 포장구의 기호도가 유의적으로 높게 나타났다. 30대는 신선함, 신맛, 향미, 구매의사에서 40대는 향에서, 50대에서는 단맛과 향에서만 대조구보다 포장구의 기호도가 유의적으로 높게 나타났다. 그리고 60대에서 신선함, 향미, 구매의사에서는 대조구보다 포장구의 기호도가 유의적으로 높게 나타난 반면, 단맛, 신맛, 아삭거림에서는 포장구보다 대조구의 기호도가 유의적으로 높은 것으로 나타났다. 모든 연령에서의 대조구와 포장구 사과의 기호도는 맛의 특성 중 신선함(p=0.0011), 향미(p=0.0002), 구매의사(p=0.0018)에서 유의적으로 포장구가 높게 나타났고, 단맛, 신맛, 아삭거림, 씹힘성에서는 기호도 차이가 나타나지 않았다.

• Transactions on Electrical and Electronic Materials
• /
• 제18권3호
• /
• pp.148-150
• /
• 2017

For the improvement of the anti-fouling features of porcelain electrical insulators, in this study, the surface of an insulator was coated with a functional material to expand the insulator's self-cleanness. The anti-fouling and mechanical features of the functional film coating of ceramic substrates made from components like an electrical insulator were analyzed. The coating methods that were used were spray coating, dip coating, and fabric coating. Following the coating, the contact angle of the coated surface was measured, revealing that the spray coating method offered the lowest angle ($13.7^{\circ}$) and a strong hydrophilic feature. The anti-fouling analysis showed that the anti-fouling features improved as the contact angle decreased. The mechanical properties - hardness and adhesion - were both excellent at 9H and 5B, respectively, regardless of the coating method that was used.

• KSBB Journal
• /
• 제17권3호
• /
• pp.235-240
• /
• 2002

친수성 표면을 만들기 위하여 산소분위기에서 1 keV의 에너지를 갖는 아르곤 이온빔을 폴리프로필렌 담체의 표면에 조사하였다. 삼차 증류수에 대한 접촉각은 개질 전의 $78^{\circ}$에서 최적의 조건에서 $22^{\circ}$까지 감소하였다. 이온 보조 반응 후의 친수성 증가는 ether, carbonyl, carboxyl 등의 새로 형성된 작용기에 의한 것이며 극성 용매에 대한 안정성이 우수하므로 활성화된 표면이 폐수 내에서도 안정하다. 활성화된 폴리프로필렌 담체를 합성폐수내의 유기물을 제거하기 위한 bio-film공정에 적용하였다. 이온 보조 반응법으로 친수성 표면으로 개질된 PP 담체는 극성 용매내에서 극성작용기가 유지되었으므로 안정된 표면 특성을 이용하여 박테리아 부착의 생물막 공정에 대한 연구를 수행하여 미생물의 부착은 표면의 염기성 극성작용기에 의하여 증진됨을 확인하였다. 합성폐수에 대한 처리 효율은 30%까지 증가 하였으며 장시간에 걸친 COD 농도 감소 효과를 나타내었으므로 이온 보조 반응법에 의하여 처리된 PP고분자를 수질 개선용의 담체로 사용하여 처리효율을 증가시킬 수 있음을 확인하였다.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1999년도 PROCEEDINGS OF KACG FALL MEETING, SEOUL, 4 DECEMBER, 1999
• /
• pp.93-99
• /
• 1999

It is definite trend that the functional devices are to be integrated by miniaturizing of individual components. Bulk crystals turn into wafer form, while thin film of the functional materials is being fabricated for single and multi-layer devices. In addition, single crystals with multi-function performance would be desirable for further miniaturization. crystal growers have the responsibility for synthesis single crystals work to meet ever increasing requirement of future devices.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 추계학술대회 논문집 학회본부
• /
• pp.136-138
• /
• 1990

In developing, microscopic scale electrical and electronic devices, molecular level Insulators and functional electric conductors are fundamental. The properties of the electrical-insulating thin film materials are very much dependent on defects and electron transfer rate. There are number of companies which try to reduce defects and control electrical conductivity. Functional electrical conductors are more demanding subject in electrical fields. Reorganization energy around the sites that generate the electrons and holes are very important for the electron transfer in the organic thin layers.

• Journal of Photoscience
• /
• 제7권2호
• /
• pp.45-46
• /
• 2000

The polyoxyethylene compounds were added into the photographic emulsion during the physical ripening of photo sensitive silver halide crystal in this emulsion. The polyoxyethylene compounds improved the photographic properties of the film to a great extent increasing the photo sensitivity and decreasing the fog density.

• 한국재료학회지
• /
• 제20권11호
• /
• pp.570-574
• /
• 2010

A diamond-like carbon (DLC) film deposited on a WC disk was investigated to improve disk wear resistance for injection molding of zirconia optical ferrule. The deposition of DLC films was performed using the filtered vacuum arc ion plating (FV-AIP) system with a graphite target. The coating processing was controlled with different deposition times and the other conditions for coating, such as input power, working pressure, substrate temperature, gas flow, and bias voltage, were fixed. The coating layers of DLC were characterized using FE-SEM, AFM, and Raman spectrometry; the mechanical properties were investigated with a scratch tester and a nano-indenter. The friction coefficient of the DLC coated on the WC was obtained using a pin-on-disk, according to the ASTM G163-99. The thickness of DLC films coated for 20 min. and 60 min. was about 750 nm and 300 nm, respectively. The surface roughness of DLC films coated for 60 min. was 5.9 nm. The Raman spectrum revealed that the G peak of DLC film was composed of $sp^3$ amorphous carbon bonds. The critical load (Lc) of DLC film obtained with the scratch tester was 14.6 N. The hardness and elastic modulus of DLC measured with the nano-indenter were 36.9 GPa and 585.5 GPa, respectively. The friction coefficient of DLC coated on WC decreased from 0.2 to 0.01. The wear property of DLC coated on WC was enhanced by a factor of 20.

• 생물환경조절학회지
• /
• 제23권4호
• /
• pp.314-320
• /
• 2014

소형 비닐하우스에 2종류의 기능성 필름과 관행의 PE 필름을 피복하고 청치마, 적치마, 치커리 등 3종의 엽채류를 재배하여 기능성필름의 특성을 검토하였다. 2종류의 기능성 필름은 PO(polyorefine)계 수지로 만들어졌으며, 엽채류는 흙과 펄라이트를 혼합한 배지에서 육묘하였다. 필름의 광학적 특성에 있어서 기능성 필름은 관행의 PE 필름과 비교하여 광합성 유효광(400-700nm)의 투과율이 높고 자외선(300-400nm)의 흡수율이 높았다. 피복 3개월 후의 광합성 유효광 투과율의 감소 수준은 기능성필름이 PE필름보다 작았다. 이 같은 요인으로 인해 엽채류의 생육과 수량이 기능성 필름을 피복한 하우스에서 높았다.