• Korean Journal of Plant Resources
• /
• v.25 no.6
• /
• pp.762-772
• /
• 2012

The objective of this study was to analyze the genetic diversity using SSR marker and investigate the fatty acid composition of perilla (P. frutescens var. frutescens) germplasm. Genetic diversity among 95 accessions, which consisted of 29 weedy types and 66 landrace accessions, was evaluated based on 12 SSR markers carrying 91 alleles. The mean values of observed ($H_O$) and expected heterozygosities ($H_E$) were 0.574 and 0.640, respectively, indicating a considerable amount of polymorphism within this collection. A genetic distance-based phylogeny grouped into two distinct groups, which were the landrace, moderate and weedy type, genetic distance (GD) value was 0.609. The physicochemical traits about crude oil contents and fatty acid compositions were analyzed using GC. Among tested germplasm, the total average oil contents (%) showed a range from 28.57 to 49.67 %. Five fatty acids and their contents in the crude oils are as follows: ${\alpha}$-linolenic acid (41.12%-51.81%), linoleic acid (15.38%-16.43%), oleic acid (18.93%-27.28%), stearic acid (2.56%-4.01%), and palmitic acid (7.38%-10.77%). The average oil content of wild types was lower than landrace, and the oil content of middle genotype accessions was higher than other germplasm, but no significant variation between landrace and wild types was shown. Nevertheless, IT117174, landrace of Korea, was highest in crude oil content (47.11%) and linolenic acid composition (64.58%) among the used germplasm. These traits of the selected accessions will be helped for new functional plant breeding in perilla crop.

• Korean Chemical Engineering Research
• /
• v.49 no.3
• /
• pp.381-386
• /
• 2011

Chemically functionalized plant oils, namely maleinized acrylated epoxidized soybean oil(MAESO), were used as a new bio based binders for photoelectrodes of dye-sensitized solar cells. The photocatalysts were characterized by field emission scanning electron microscope(FE-SEM), energy dispersive X-ray spectrometer(EDS), X-ray diffraction(XRD), X-ray photoelectron spectroscopy(XPS) and nitrogen adsorption analyses. The surface area and number of appropriate pores were increased in the $TiO_{2}$ particles prepared using the plant oil binders in comparison with the P-25 photocatalyst, due to the larger number of functionalities. The functional groups of OH on the surface of the $TiO_{2}$ particles increased from 9.9% to 16.62%.

• Applied Biological Chemistry
• /
• v.48 no.2
• /
• pp.128-131
• /
• 2005

Sesame seed is known as a good nutritional source containing high oil (51%) and protein (20%). Sesame oil contains a very high oxidative stability compared to other vegetable oils. To obtain basic information for quality evaluation, imported and domestic sesame seeds were investigated to measure general components (ash, protein, moisture and oil), fatty acid composition and lignan content. Although the protein contents were the highest in domestic sesame seeds, yet the lipid contents were the highest in imported sesame seeds. Unsaturated fatty acids such as oleic acid and linoleic acids were the highest in the domestic sesame seeds. Lignan contents, the most important component known as antioxidant, were significantly higher in domestic sesame seeds than other imported sesame seeds. These results suggest that domestic sesame seed may have the best quality in terms of the functional components.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.25 no.4 s.34
• /
• pp.97-110
• /
• 1999

The new stick make-up product was studied by using a gel, which is a viscous complex formed with clay minerals, vitamins A and E and fluorinated liquid polymer with a 1500 molecular weight. The gel cannot be obtained with any random combination of clay minerals and the ingredients described above. It takes the sequential manufacturing method as follows to get this kind of gel. Firstly, clay minerals and liquid polymers have to be pre-mixed in order to saturate the liquid polymers with the clay minerals. Then the on-processed gel has to be finely crystallized. The clay minerals, which are the core elements for this gel, were used as a function of Binder & Buffer and liquid polymer was mixed together for the deterioration of the surface tension of each component and to form a functional film in the gel. This liquid polymer was combined with clay minerals because it is not miscible with most oils and solvents. Waxes have a function of keeping a solid status in the stick. We reduced the usage of waxes by putting clay minerals as buffer in the proportion of 0.5:1 with oil phase. Ceramide takes care of the skin when used regularly and maintains the skin's moisture. Vitamins A and E contribute to preventing skin aging by the activation of skin cells. We could get the stable viscous gel, which has about 80% oil phase using clay minerals and liquid polymer. The crystalline structures of gel were surface-chemically-analyzed using SEM and Image Analyzer and were thermodynamically analyzed using DSC. Surface tension test and softness were done by Rheometer. In the end, these characteristics were verified by consumer panel tests in Seoul, Daegeon and Pusan in Korea and Hokkaido, Osaka and Miyazaki in Japan with correlation to the climate.

• Food Science of Animal Resources
• /
• v.40 no.2
• /
• pp.209-220
• /
• 2020

Milk fat globule membrane (MFGM) is a lipid carrier in mammals including humans that consists mainly of polar lipids, like phospholipids and glycolipids. In this study, a process to enrich polar lipids in commercial butter and whey powder, including polar lipids of MFGM, was developed. WPC (whey protein concentrate) 60 was selected as the most suitable raw material based on the yield, phospholipid, protein, and lactose content of the polar lipid fraction obtained by ethanol extraction of two WPC (WPC60 and WPC70) and two buttermilk (A and B). After fractionation under optimum conditions, the polar-lipid enriched fraction from WPC60 contained 38.56% phospholipids. The content of glycolipids, cerebroside, lactosylceramide, ganglioside GM3, ganglioside GD3, was 0.97%, 0.55%, 0.09%, and 0.14%, respectively. Rancimat results showed that the oxidation stability of fish oil increased with an increase in the polar-lipid fraction by more than 30 times. In addition, the secretion of IL-6 and TNF-α decreased in a concentration-dependent manner after treatment of RAW 264.7 cells with 0.1 to 100 ppm of the polar lipid fraction. In this study, polar lipid concentrates with antioxidant and anti-inflammatory activity, were prepared from milk processing by-products. The MFGM polar lipid concentrates made from by-products are not only additives for infants, but are also likely to be used as antioxidants in cooking oils and as active ingredients for functional foods.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.11
• /
• pp.725-732
• /
• 2014

Phytoremediation is a technology to mitigate the pollutant concentrations such as metals, pesticides, solvents, oils, or others in contaminated water and soils with plants. The plants absorb contaminants through the root and store them in the root, stems, or leaves. Rapid growth trees such as poplar are used to remove low concentrated contaminants eco-friendly and economically in a wide contaminated region. This study was practiced to evaluate an activated carbon production system by using poplar wood discarded after phytoremediation. Life cycle assessment methodology was used to analyze environmental impacts of the system, and the functional unit was one ton of harvested poplar. It was estimated that the small size rotary kiln for activated carbon production from poplar wood had an environmental benefit in optimized conditions to minimize energy consumptions. The results of an avoided environmental impact analysis show that the system contribute to reduce environmental impacts in comparison with activated carbon production from coconut shell.

• Korean Journal of Environmental Agriculture
• /
• v.27 no.4
• /
• pp.356-361
• /
• 2008

Chrysanthemum indicum L. (Gamgug) has been examined to study their flowering habits, yields and bioactive compounds under different planting densities and mowing dates. The planting density experiment revealed a significantly increasing stem diameter, number of flowers and branches with decreasing plant density in the $100\;cm{\times}30\;cm$ and $130\;cm{\times}30\;cm$ treatments as compared to $70\;cm{\times}30\;cm$ treatments, but not plant height, leaf and flower width. On the other hand, the mowing date experiment showed that growth characteristics of plants were similar to the control plants (not mowing) and June 20 treatment, but July 20 treatments had significantly smaller than the control. The weights (g $plant^{-1}$) of dry flowers were affected by the planting density and mowing date. The flower yield of $586\;kg\;ha^{-1}$ obtained at $100\;cm{\times}30\;cm$ density was 11% and 22% higher than that of $120\;cm{\times}30\;cm$ and $70\;cm{\times}30\;cm$ treatments, respectively. The yield of dry flowers in the control and June 20 mowing date ranged $495-508\;kg\;ha^{-1}$, which is 40-42% higher than the yield in the July 20 treatments. The amount of essential oil (g $plant^{-1}$) in medically valuable flowerheads of C. indicum L. was statistically different between mowing dates but not among planting densities. The study showed that planting density and the mowing date could increase yields of flowerheads. An optimum planting density of $100\;cm{\times}30\;cm$ and mowing date of on or before June 20 is recommended for C. indicum L.

• Journal of the Korean Society of Food Culture
• /
• v.18 no.1
• /
• pp.1-8
• /
• 2003

Recently, the concern about safety and functional substances of foods are increased therefore antioxidant substances and plants which had pharmacological effect have been studied actively. It has been known that the mulberry leaf is effective in curing many diseases. Nowaday, the pharmachological effects of mulberry leaves on diabetes mellitus and their usage for many aspects were confirmed. Mulberry leaves are known for effective in prevention of diabetes mellitus, because of specific amino acids and fibers. In this study, methanol, hexane, chlorform, ethyl acetate, and butanol extracts obtained from mulberry leaves were added to soybean oil and they were stored for 30 days at $60{\pm}2^{\circ}C$ and peroxide value(POV) and conjugated diene value(CDV) were measured periodically. Results of this study were obtained as follows; 1. The POV of soybean oil after the addition of each mulberry leaves powder(MLP) extracts generally enhanced as the storage time was prolonged, so the POV of all samples was reached higher than 100meq./kg.oil after 10 days storage without the addition of butanol, methanol, ethylacetate, hexane extracts at 0.1% level. Especially, the POV of soybean oils including butanol extract was 87.35meq/kg.oil after 10 days storage and antioxidant activity of butanol extract was shown to be superior to that of BHT. The pattern of the changes of the CDV of soybean oil after the addition of MLP extracts at 0.02%, 0.05% and 0.1%, respectively, were almost constant during 10 days of storage and then rapidly increased during the rest of experimental periods. During 10 days of storage in case of 0.1% adding level, the antioxidant activities of the butanol extract was superior to that of the each MLP extracts.

• Proceedings of the SCSK Conference
• /
• 1999.10a
• /
• pp.97-110
• /
• 1999

The new stick make-up product was studied by using a gel, which is a viscous complex formed with clay minerals, vitamins A and I and fluorinated liquid polymer with a 1500 molecular weight. The gel cannot be obtained with any random combination of clay minerals and the ingredients described above. It takes the sequential manufacturing method as follows to get this kind of gel. Firstly, clay minerals and liquid polymers have ·to be pre-mixed in order to saturate the liquid polymers with the clay minerals. Then tile on-processed gel has to be finely crystallized. The clay minerals, which are the core elements for this gel, were used as a function of Binder & Buffer and liquid polymer was mixed together for the deterioration of the surface tension of each component and to from a functional film in the gel. This liquid polymer was combined with clay minerals because it is not miscible with most oils and solvents. Waxes have a function of keeping a solid status in the stick. We reduced the usage of waxes by putting clay minerals as buffer in the proportion of 0.5 : 1 with oil phase. Ceramide takes care of the skin when used regularly and maintains the skin’s moisture. Vitamins A and I contribute to preventing skin’aging by the activation of skin cells. We could get the stable viscous gel, which has about 80% oil phase using clay minerals and liquid polymer, The crystal 1 me structures of gel were surface-chemical1y-analyzed using SEM and Image Analyzer and were thermodynamically analyzed using DSC, Surface tension test and softness were done by Rheometer. In the end, these characteristics were verified by consumer panel tests in Seoul, Baegeon and Pusan in Korea and Hokkaido, Oska and Miyazaki in Japan with correlation to the climate.

• Archives of Pharmacal Research
• /
• v.29 no.11
• /
• pp.1055-1060
• /
• 2006

The objective of this study was to formulate itraconazole semisolid dosage forms and characterize their physicochemical properties. Itraconazole and excipients such as polysorbate 80, fatty acids, fatty alcohols, oils and organic acids were melted at $160^{\circ}C$. The fused solution was then cooled immediately at $-10^{\circ}C$ to make wax-like semisolid preparations. Their physicochemical attributes were first characterized using differential scanning calorimetry, Fourier transform infrared spectroscopy and nuclear magnetic resonance spectrometry. The solubility of itraconazole in semisolid preparations and their dispersability in the simulated gastric fluid were also determined. Our semisolid preparations did not show any distinct endothermic peak of a crystalline form of itraconazole around $160-163^{\circ}C$. This suggested that it was changed into amorphous one, when it was formulated into semisolid preparations. In addition, the distinctive functional peaks and chemical shifts of itraconazole were well retained after processing into semisolid preparations. It could be inferred from the data that itraconazole was stable during incorporation into semisolid preparations by the hot melt technique. In particular, itraconazole semisolid preparations composed of polysorbate 80, fatty acids and organic acids showed good solubility and dissolution when dispersed in an aqueous medium. It was anticipated that the semisolid dosage forms would be industrially applicable to improving the bioavailability of poorly water-soluble drugs.