• Journal of Navigation and Port Research
• /
• v.42 no.6
• /
• pp.478-485
• /
• 2018

Aids to Navigation (AtoN) is one of the marine traffic safety facilities that promotes the safety of maritime traffic and enhance ship's operational efficiency. However, functional failure of AtoN due to ship's collision or bad weather conditions leads to inconvenience or navigational risk to various users such as the ship operators. For insstance, the largest container port in Korea, Busan Port has experienced a total of 400 AtoN accidents in the past 12 years (2006-2017).Therefore, an average of 20.6 days of recovery time is required, which increases the maritime safety anxiety for AtoN users. is the objective of this study was to present the quantitative support of the users for the prevention of AtoN accidents and the improvement of the feasibility of implementing more efficient management in Korea. A survey was conducted on the users of Busan port areas to investigate general perception of AtoN in general and the accidents that have happened, and to estimate the economic value of navigational risk reduction by implementing effective AtoN management measure. Using the representative non-market valuation method for environmental or public goods known as contingent valuation method (CVM), the economic value granted to users for the AtoN services in Busan port was estimated to at least 16 billion won. Therefore, these finding could be used by AtoN managers and/or policy makers as a valuable data to identify the users' need of various AtoN services including Busan Port and to establish and implement more efficient management plan.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.2
• /
• pp.165-172
• /
• 2019

The purpose of this study was to evaluate the effect of application time and phosphoric acid etching of 8th generation adhesives containing functional monomer on adhesive performance in primary teeth. 80 extracted non-carious human primary teeth were selected and divided into 8 groups based on 3 factors: (1) adhesive: G-Premio bond and Single bond universal; (2) application time: shortened time and manufacture's instruction; (3) acid etching mode: self-etching and total-etching. Shear bond strength was measured using a universal testing machine, and fractured surface were observed under scanning electron microscope. Microleakage was evaluated by dye penetration depth. G-Premio bond were not significant different in shear bond strength and microleakage depending on application time of adhesive and acid etching mode. In Single bond universal, shear bond strength of short application time was significantly lower than that of long adhesive application time (p = 0.014). Clinically applicable shear bond strength values (> 17 MPa) were identified in all groups. These results suggested that G-Premio bond be used clinically for a short application time without phosphoric acid etching.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.781-788
• /
• 2021

This paper is the study of a design to eliminate the communication error that occurs between the main controller and the servo controller of the K56 ammunition-carrying armored vehicle. The K56 assists in the operation of the K-55A1 self-propelled gun by automating the supply and loading of ammunition. The CAN communication board of the ammunition carrier is a key-function product mounted inside the main controller and installed for communication with the servo controller. It was confirmed that an undefined error would occur intermittently in the existing CAN communication board, interrupting the operation of the ammunition supply system during the loading process. In this paper, in order to solve the problem, the cause of the failure is identified through analysis and a functional test of the communication signal between the main controller and the servo controller. The error was resolved by redesigning and improving the Read/Write algorithm. Finally, the proposed cause analysis and design effectiveness were verified through the CAN communication board single item test and a system equipment application test. It is expected that this study will serve as a reference for improving defense capabilities through improving the reliability of CAN communication boards and by improving the reliability of the overall electronic equipment using DPRAM.

• Clinics in Shoulder and Elbow
• /
• v.26 no.3
• /
• pp.231-237
• /
• 2023

Background: In the past decade, the number of anatomic total shoulder arthroplasty (aTSA) procedures has steadily increased. Patients over 65 years of age comprise the vast majority of recipients, and outcomes have been well documented; however, patients are opting for definitive surgical treatment at younger ages.We aim to report on the effects of age on the long-term clinical outcomes following aTSA. Methods: Among the patients who underwent TSA, 119 shoulders were retrospectively analyzed. Preoperative and postoperative clinical outcome data were collected. Linear regression analysis (univariate and multivariate) was conducted to evaluate the associations of clinical outcomes with age. Kaplan-Meier curves and Cox regression analyses were performed to evaluate implant survival. Results: At final follow-up, patients of all ages undergoing aTSA experienced significant and sustained improvements in all primary outcome measures compared with preoperative values. Based on multivariate analysis, age at the time of surgery was a significant predictor of postoperative outcomes. Excellent implant survival was observed over the course of this study, and Cox regression survival analysis indicated age and sex to not be associated with an increased risk of implant failure. Conclusions: When controlling for sex and follow-up duration, older age was associated with significantly better patient-reported outcome measures. Despite this difference, we noted no significant effects on range of motion or implant survival. Level of evidence: IV.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.2
• /
• pp.1-8
• /
• 2024

The expansion joint is installed to offset the expansion of the superstructure and must ensure sufficient gap during its service life. In detailed guideline of safety inspection and precise safety diagnosis for bridge, damage due to lack or excessive gap is specified, but there are insufficient standards for determining the abnormal behavior of superstructures. In this study, a data-based maintenance was proposed by continuously monitoring the expansion-gap data of the same expansion joint. A total of 2,756 data were collected from 689 expansion joint, taking into account the effects of season. We have developed a method to evaluate changes in the expansion joint-gap that can analyze the thermal movement through four or more data at the same location, and classified the factors that affect the superstructure behavior and analyze the influence of each factor through deep learning and explainable artificial intelligence(AI). Abnormal behavior of the superstructure was classified into narrowing and functional failure through the expansion joint-gap evaluation graph. The influence factor analysis using deep learning and explainable AI is considered to be reliable because the results can be explained by the existing expansion gap calculation formula and bridge design.

• Journal of Yeungnam Medical Science
• /
• v.18 no.2
• /
• pp.226-238
• /
• 2001

Background: Anemia in chronic renal failure plays an important role in increasing morbidity of dialysis patients. The causes of the anemia are multifactorial. With using of erythropoietin(EPO) most of uremia-induced anemia can be overcome. However, about 10% of renal failure patients shows EPO-resistant anemia. Hyporesponsiveness to EPO has been related to many factors: iron deficiency, aluminum intoxication, inflammations, malignancies and secondary hyperparathyroidism. So I evaluated the improvement of EPO responsiveness after correction of above several factors. Materials and Methods: Seventy-two patients on hemodialysis over 6 months were treated with intravenous ascorbic acid(IVAA, 300 mg t.i.w. for 12 weeks), After administration of IVAA for 12 weeks, patients were classified into several groups according to iron status, serum aluminum levels and i-PTH levels. Indivisualized treatments were performed: increased iron supplement for absolute iron deficiency, active vitamin D3 for secondary hyperparathyroidism and desferrioxamine(DFO, 5 mg/kg t.i.w.) for aluminum intoxication or hyperferritinemia. Results: 1) Result of IVAA therapy for 12 weeks on all patients(n=72). Hemoglobin levels at 2, 4, 6 week were significantly elevated compared to baseline, but those of hemoglobin at 8, 10, 12 week were not significantly different. 2) Result of IVAA therapy for 20 weeks on patients with 100 ${\mu}g/l$ ${\leq}$ ferritin < 500 ${\mu}g/l$ and transferrin saturation(Tsat) below 30%(n=30). After treatment of IV AA for 12 weeks, patients were evaluated the response of therapy according to iron status. Patients with 100 ${\mu}g/l$ ${\leq}$ ferritin < 500 ${\mu}g/l$ and Tsat below 30% showed the most effective response. These patients were treated further for 8 weeks. Hemoglobin levels at 2, 4 week were significantly increased compared to baseline with significantly reduced doses of EPO at 2, 4, 6, 10, 12, 16, 20 week. Concomitantly significantly improvement of Tsat at 2, 6, 16, 20 week compared to baseline were identified. 3) Result of IVAA therapy for 12 weeks followed by DFO therapy for 8 weeks on patients with serum aluminum above 4 ${\mu}g/l$(n=12) Hemoglobin levels were not significantly increased during IVAA therapy for 12 weeks but dosages of EPO were significantly decreased at 2, 4, 6, 8 week during DFO therapy compared to pre-treatment status. Conclusion: IVAA can be helpful for the treatment of the anemia caused by functional iron deficiency and can reduce the dosage of EPO for anemia correction. And administration of low dose DFO, in cases of increased serum aluminum level, can reduce the requirement of EPO.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.2
• /
• pp.169-181
• /
• 2007

Statement of problem: Titanium is well known as a proper metal for the dental restorations, because it has an excellent biocompatibility, resistance to corrosion, and mechanical property. However, adhesion between titanium and dental porcelains is related to the diffusion of oxygen to the reaction layers formed on cast-titanium surfaces during porcelain firing and those oxidized layers make the adhesion difficult to be formed. Many studies using mechanical, chemical and physical methods to enhance the titanium-ceramic adhesion have been actively performed. Purpose: This study meant to comparatively analyse the adhesion characteristics depending on different titanium surface coatings after coating the casts and wrought titanium surfaces with Au and TiN. Material and method: In this study, the titanium specimens (CP-Ti, Grade 2, Kobe still Co. Japan) were categorized into cast and wrought titanium. The wrought titanium was cast by using the MgO-based investment(Selevest CB, Selec). The cast and wrought titanium were treated with Au coating($ParaOne^{(R)}$., Gold Ion Sputter, Model PS-1200) and TiN coating(ATEC system, Korea) and the ultra low fusing dental porcelain was fused and fired onto the samples. Biaxial flection test was done on the fired samples and the porcelain was separated. The adhesion characteristics of porcelain and titanium after firing and the specimen surfaces before and after the porcelain fracture test were observed with SEM. The atomic percent of Si on all sample surfaces was comparatively analysed by EDS. In addition, the constituents of specimen surface layers after the porcelain fracture and the formed compound were evaluated by X-ray diffraction diagnosis. Result: The results of this study were obtained as follows : 1. The surface characteristics of cast and wrought titanium after surface treatment(Au, TiN, $Al_2O_3$ sandblasting) were similar and each cast and wrought titanium showed similar bonding characteristics. 2. Before and after the biaxial flection test, the highest atomic weight change of Si component was found in $Al_2O_3$ sandblasted wrought titanium(28.6at.% $\rightarrow$ 8.3at.%). On the other hand, the least change was seen in Au-Pd-In alloy(24.5at.% $\rightarrow$ 9.1at.%). 3. Much amount of Si components was uniformly distributed in Au and TiN coated titanium, but less amount of Si's was unevenly dispersed on Al2O3 sandblasting surfaces. 4. In X-ray diffraction diagnosis after porcelain debonding, we could see $Au_2Ti$ compound and TiN coating layers on Au and TiN coated surfaces and $TiO_2$, typical oxide of titanium, on all titanium surfaces. 5. Debonding of porcelain on cast and wrought titanium surface after the biaxial flection is considered as a result of adhesion deterioration between coating layers and titanium surfaces. We found that there are both adhesive failure and cohesive failure at the same time. Conclusion: These results showed that the titanium-ceramic adhesion could be improved by coating cast and wrought titanium surfaces with Au and TiN when making porcelain fused to metal crowns. In order to use porcelain fused to titanium clinically, it is considered that coating technique to enhance the bonding strength between coating kKlayers and titanium surfaces should be developed first.

• Journal of Chest Surgery
• /
• v.33 no.7
• /
• pp.547-551
• /
• 2000

Background; The purpose of this study was to analyze the early and midterm results of Cabrol technique to assist in making future decisions on a more adequate technique for repairing aortic root diseases. Material and Method; From August 1993 to July 1999, we performed Cabrol technique in 18 patients ; 12 annuloaortic ectasia, 6 Stanford type A aortic dissection. Male and female ratio was 11;7, mean age was 46.9$\pm$12.3 years and mean follow up period was 22.5$\pm$21.5 months. We analysed the factors influencing postoperative complications and early mortality. The factors were old age(>60 years), high NYHA(>III), preoporative concomitant disease, urgency of operation, concomitant procedure, long pump preoperative concomitant disease, urgency of operation, concomitant procedure, long pump time(>200 minute), and hospital stay time (>30 days). Result; Operative mortality was 11.1%, late mortality was 11.1%, and overall mortality was 22.2%. The causes of operative death were a heart failure and an arrhythmia. The causes of late death were an acute myocardial infarction and an unknown etiology. Postoperative complications were bleeding, wound infection, toxic hepatitis, acute renal failure, and cerebral infarction. The factors influencing postoperative complications were hihg MYHA Fc(>III) (p=0.044), concomitant disease (p=0.044), long pump time(>200 minute)(p=0.015), and concomitant procedure(p=0.004). There were no significant factors influencing early mortality. Conclusion; The lower postoperative bleeding rate and no complication related to tension of anastomosis after Cabrol technique warrant its consideration in patients requiring aortic root replacement, especially without feasible mobilization of coronary arteries. However, to confirm the graft thrombosis, a more detailed study including periodic angiography will be required.

• Journal of Chest Surgery
• /
• v.37 no.9
• /
• pp.768-773
• /
• 2004

Failure of mitral valve repair sometimes may be ascribed to severe or progressive alteration of the subvalvar apparatus. The aim of this study was to evaluate the effects of new chordae formation on mitral repair. Material and Method: From March 1997 to february 1999, 26 patients underwent mitral valve repairs with new chordae formation, we compared the symptoms and echocardiographic findings checked at preoperative state, and intraoperative period, discharge, and their last OPD visit. There were 45 male, and 11 female patients, and their mean age was 51.2$\pm$43.4 years. Etiology of the lesions was degenerative (18), rheumatic (6), infective (1) and ischemic (1). Chordal lesions were caused by rupture (18), elongation (6), and a combination of two causes (2). Associated lesions included atrial septal defect (2), tricuspid insufficiency (7), aortic insufficiency(4), and a combination of previous two factors (2). The number of mean artificial chordae was 3.6$\pm$1.6. Annuloplasty was per-formed in all cases. The CPB time was 182,1$\pm$63.7 minutes and the ACC time was 133.1$\pm$45.6 minutes. Aver-age follow up period was 49.2$\pm$7.1 months. Result: There was no early death. Early reoperation was performed in bud patients, one patient received mitral valve replacement because of an abnormality of annuloplasty and ano-ther received pericardiostomy due to postoperative pericardial effusion. During the follow up of 49.2$\pm$7.1 moths, there was no late mortality. Postoperative NYHA functional class checked at last OPD visit was class I in 22 patients (88%), class II in 2 (8%), and class III in 1 (4%). Regarding the late echocardiogram MR was absent in 20 patients (78%), 1 in 4 (15%), and II in 1 (4%). The postrepair mitral valve area was 2.2$\pm$0.35 $\textrm{cm}^2$ Conclusion: This study suggests that mitral valve repair using new chordae formation provides good early and mid term survivals and functional improvement. We think that the artificial chorda formation with polytetrafluoroethylene suture might be safe and effective technique for mitral valve repair.

• Journal of the Korean Arthroscopy Society
• /
• v.9 no.2
• /
• pp.167-173
• /
• 2005

Purpose: The purpose of this study is to evaluate the clinical results of posterior cruciate ligament (PCL) and posterolateral structure (PLS) reconstruction using bilateral hamstring tendon autografts. Materials and Methods: From October 2002 to March 2004, ten patients were received PCL and PLS reconstruction simultaneously using bilateral hamstring autografts. PCL was reconstructed using ipsilateral hamstring tendon and fixed with cross pins and Intrafix (Mitek, Norwood, MA). PLS was reconstructed using contralateral hamstring tendon. The mean follow up was 17 months. Clinical assessments consisted of Lysholm knee scores, International Knee Documentation Committee (IKDC) evaluation form and posterior stress radiographs. External rotation of tibia was evaluated at $30^{\circ}\;and\;90^{\circ}$ knee flexion using Noyes and Barber-Westin's classification. Contralateral harvest site morbity was evaluated using IKDC evaluation form and flexion power of the knee. Results: Mean posterior displacement of tibia using stress radiographs was improved from 13.3 mm to 3.7 mm. In tibial external rotation evaluation, 7 patients were functional, 2 patients were partially functional and one failure. The average Lysholm knee score improved from 54 preoperatively to 86 postoperatively. At the final IKDC evaluation, 8 patients were graded as nearly normal, 2 were graded as abnormal. In contralateral harvest site morbidity evaluation, 2 patients complained of numbness around the wound but negligible. Conclusion: PCL and PLS reconstruction using bilateral hamstring autografts was considered as a good treatment method with minimal contralateral harvest site morbidity.