• 대한원격탐사학회지
• /
• 제14권1호
• /
• pp.53-68
• /
• 1998

대기중에 존재하는 수증기의 관측은 일기와 기후의 이해에 있어서 매우 중요한데, 기존의 관측체계로는 지구상의 극히 제한된 지역의 수증기 분포만을 관측할 수 있다. 이 연구에서는 일본 정지기상위성인 GMS-5의 적외 split window 채널 관측자료로부터 대기중에 함유되어 있는 수증기 총량 즉 가강수량(precipitable water)을 산출하였다. 가강수량 산출에는 라디오존데 관측 가강수량과 split window 관측자료 사이의 회귀분석에 기초한 Chesters et al.(1983)의 알고리즘을 사용하였 다. 가강수량 산출을 위하여 센서의 필터 함수와 관련된 수증기 흡수 파라미터는 우리 나라 고층 관측소인 오산, 광주,포항,제주에서 관측한 '76년 8월부터 11월가지의 4개월간 관측한 라디오존데 자료와 위성 관측자료의 회귀분석을 통하여 산출하였다. 한편 기상청 전구 스펙트랄 모델의 700 hPa온도를 1층 복사 모델의 대기 평균 온도로 사용하였다. 1996년 7월부터 12월까지의 기간에 대하여 산출한 GMS-5 가강수량 자료를 같은 기간 관측된 라디오존데 관측자료와 비교한 결과 0.46의 상관계수와 0.65 g/$cm^2$~1.09 g/$cm^2$의 RMS 오차를 나타내었다. GMS-5로부터 산출된 월평균 가강수량 분포는 계절에 따른 전지구 규모의 수증기 분포변화를 잘 나타내었다. 이번 연구에서 산출된 위성 가강수량은 0.5$^{\circ}$격자 간격으로 6시간마다 기상청에서 정규적으로 산출된다. 이 자료는 수치예보의 객관분석 초기 자료로 이용되어, 특히 청천 조건하에서의 습도 분석의 정확도 향상에 기여하며 기후 연구에 있어서도 현존하는 자료 세트에 대한 유용한 보완 자료가 될 것이다. 그러나 연구 결과의 실용화를 위하여는 좀더 높은 상관계수와 산출절차 등의 개선이 필요하다.용성을 고찰하였다.산마와 재배와 점질다당류가 각각 219~332$^{\circ}C$, 229~341$^{\circ}C$ 범위였다.TEX> 범위였다. 사면의 풍화와 침식에 대한 대책연구도 수행되어야 한다. 15ng/$\textrm{cm}^2$로서 90분간 조사로 27ng/$\textrm{cm}^2$량이 생성되었다. 7-DHC은 당초의 123ng/$\textrm{cm}^2$으로부터 계속 감소되어 150분간 조사시 53ng/$\textrm{cm}^2$량까지 내려갔다.하였으며, 그 외의 항목간에는 대동소이하였다.ckarti 와 E. serrulatus가 스파르가눔의 중간숙주가 될 수 있음을 확인하였다. 충란의 배양에서부터 종숙주의 충란 배출까지 약 2개월 정도의 기간이 소요되었고, 우리 나라 자연환경에서는 5일에서 7월에 주로 이 충체의 유충이 발육되고 전파되는 것으로 추측되었다.러 가지 방법들을 적극 적용하여 금후 검토해볼 필요가 있을 것이다.잡은 전혀 삭과가 형성되지 않았다. 이 결과는 종간 교잡종을 자방친으로 하고 그 자방친의 화분친을 사용할 때만 교잡이 이루어지고 있음을 나타내고 있다. 따라서 여교잡을 통한 종간잡종 품종육성 활용방안을 금후 적극 확대 검토해야 할 것이다하였다.함을 보이고 있다.X> , ZnCl$_{3}$$^{-}$같은 이온과 MgCl$^{+}$, MgCl$_{2}$같은 이온종을 형성하기 때문인것 같다. 한편 어떠한 용리액에서던지 NH$_{4}$$^{+}$의 경우 Dv값이 제일 작았다. 바. 본 연구의 목적중의 하나인 인체유해 중금속이온인 Hg(II), Cd(II)등이 NaCl같은 염화물이 함유된 시료용액에

• 한국토양비료학회지
• /
• 제39권6호
• /
• pp.329-333
• /
• 2006

유기물 함량이 많은 난지권 제주도의 화산회 토양에서의 수분함량과 토양수분 장력과의 관계를 파악하는 것이 밭작물이 주로 재배되는 제주도 특성상 계획적인 관개관리를 통해 효율적인 물 관리를 가능하게 할 것이므로 이를 위해 본 연구는 토양수분 장력을 실측하지 않고 추정할 수 있도록 유기물 함량이 다른 토색별 토양수분특성곡선을 작성하고자 하였다. 유기물 함량에 차이가 많이 나는 세 가지 색의 토양을 이용해 토양수분 장력별로 토양수분 함량을 측정한 후 scaling 기법을 이용해 토양수분 특성곡선 추정모형을 작성했다. 암갈색, 농암갈색, 흑색으로 구분이 가능한 화산회 토양을 토색별로 살펴보면, 토성이 동일하더라도 유기물함량이 높은 화산회 토양일수록 토색이 진한 경향을 보여 토색에 미치는 유기물 함량의 영향을 판단할 수 있었다. 토색별 토양수분 특성곡선은 흑색토, 농암갈색토, 암갈색토의 순으로 수분 보유능의 차이를 보였으며, 이들도 scaling 기법을 통해 토양수분장력을 dimensionless water content의 멱함수 형태로 단일화 시킬 수 있었다. 또한, scale 변환 수분함량을 이용해 주로 토양수분 특성을 해석하는데 많이 이용되고 있는 van Genuchten 모형에 적용할 수 있는 매개변수들을 토양시료 전체에 대해, 그리고 각각의 토색별로 작성하였다. 이들 함수는 로지스틱(logistic) 형태를 보였다. 결과적으로 토양수분 곡선특성 추정모형은 수리특성의 기본이 되어 농경지에서의 물의 이동특성을 해석하는 밑바탕이 될 것이며, van Genuchten 변수들은 유기물 함량이 높은 지역에서 SWAT 등의 다양한 수문모형들에 적용이 가능할 것이다.

• 한국심리학회지:법
• /
• 제13권1호
• /
• pp.1-22
• /
• 2022

본 연구는 국민참여재판의 평결범주가 일반인의 법적판단에 미치는 영향과 그 과정에서 '무죄표상'의 역할을 확인하였다. '무죄표상'은 일반적인 의미의 무죄(잘못이 없음)판단을 위한 심리적 기준을 의미한다. 또한, 법률로 정해진 유죄판단 기준으로 간주되는 '합리적 의심의 여지없는 유죄의 증명(beyond a reasonable doubt: BRD)'과 개인의 역치에 대한 추정치인 IT(individual threshold)의 역치로서의 기능을 비교하였다. 본 연구는 평결범주(유죄/무죄 vs. 유죄/유죄아님)와 피고인 유죄가능성(낮음 vs. 높음)을 각각 두 수준으로 조작한 2×2 완전교차요인설계를 사용하였으며, 온라인으로 진행되는 실험에 자발적으로 참여한 137명의 자료가 분석에 사용되었다. 실험은 '무죄표상' 및 기소유죄확률 측정, 재판시나리오 제시, 피고인에 대한 법적판단(판단 확신감 및 피고인 유죄가능성 추정 등 포함) 순으로 진행되었다. 연구 결과, 평결범주는 일반인의 법적판단에 유의한 영향을 미치지 못하는 것으로 나타났으나 '유죄/무죄'의 평결범주를 제시받은 경우 '유죄/유죄아님'의 평결범주를 제시받은 경우보다 유죄판단 비율이 높은 경향이 있었다. 일반인들의 '무죄표상'과 평결범주의 상호작용은 이론적 유죄판단 역치(BRD)와 개인의 역치(IT)의 차이(역치 변화량)를 잘 예측하는 것으로 나타났으며, '유죄/무죄'의 평결범주를 제시받은 경우에 '유죄/유죄아님'의 평결범주를 제시받은 경우보다 '무죄표상'의 변화에 따른 역치변화량이 더 컸다. 역치로서의 BRD와 IT를 비교한 결과에서는 IT가 유죄가능성과 상호작용하여 일반인의 법적판단을 유의하게(p<.1) 예측하는 것으로 나타나서 IT가 BRD보다 더 좋은 역치 추정치라고 할 수 있었다. 본 연구는 법률가들 사이에서 종종 제기되는 문제인 국민참여재판 평결범주의 효과를 실험을 통하여 확인하고 그 효과의 심리적 기제에 대한 논리적인 추론 및 경험적 근거를 제공하였다는 데 의의가 있다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제27권2호
• /
• pp.17-24
• /
• 2023

이 논문은 total flux leakage (TFL) 방법을 이용해 외부텐던을 비파괴검사 하는 솔레노이드 형태의 센서의 측정 신호를 후처리하는 방법을 소개한다. 기존에 개발된 TFL 솔레노이드 센서는 1차 코일과 2차 코일로 이루어져 1차 코일에 정현파 형태의 교류를 입력하면 2차 코일에 그 미분에 비례하는 신호가 측정된다. 이때 진폭은 텐던의 단면에 비례하므로 파단 및 부식 여부를 확인할 수 있다. 따라서 TFL센서의 측정신호에서 진폭정보를 추출 하는 것이 중요한데 기존에는 단순히 극댓값을 모아 진폭정보를 취득했다. 하지만 이 방법을 사용하면 측정빈도가 크게 낮아져 추가적인 신호처리 및 인공지능 적용에 많은 제약이 생긴다. 이 논문은 높은 측정빈도를 가진 진폭정보를 추출하기 위해 진폭복조를 응용해 진폭정보를 획득하는 방법을 제시한다. 진폭복조를 이용해 진폭정보를 취득하면 측정빈도를 원시신호와 동일한 수준으로 유지할 수 있다. 이 방법은 TFL센서의 1차 코일 입력 주파수 선택과 센서를 외부텐던에 적용하는 속도 등에 제약을 없애주어 개발 방향에 많은 자유도를 부여한다. 또한 높은 측정빈도를 유지하므로 추가적인 신호처리나 인공지능 등을 활용 하는데 유리함을 제공한다. 제안된 방법은 실내실험을 통해 검증 되었으며 기존 방법과 비교해 어떤 장점이 있는지 분석했다. 제시된 예제의 경우 진폭복조를 사용한 방법이 기존 방법에 비해 100배 높은 측정빈도를 제공 하는 것을 확인 할 수 있었다. 주어진 상황과 구체적인 장비 설정에 따라 차이가 있겠지만 대부분의 경우 진폭복조를 사용해 진폭정보를 추출하면 기존 방법 대비 만족할만한 결과를 얻을 수 있을 것이다.

• KDI Journal of Economic Policy
• /
• 제46권1호
• /
• pp.91-129
• /
• 2024

한국은행은 금융위기 이후인 2011년 법 개정을 통해 기존의 물가안정 이외에 금융안정 책무를 추가로 부여받았는데, 그 이후 장기간에 걸쳐 가계신용이 소득 여건에 비해 빠르게 증가해 온 결과 최근의 가계부채 상황은 소비와 성장을 제약하고 부정적 경제충격발생 시 위기 발생 가능성을 높일 수 있다는 우려가 제기되고 있다. 현재의 금융불균형 누증 상황이 앞으로 우리 금융·경제의 안정적 흐름을 제약하지 않도록 정부와 중앙은행이 더욱 유의해야 할 시기인 것으로 판단된다. 본 연구는 BIS가 중장기 경제안정화를 위해 거시·금융안정(macro financial stability)을 모색하고자 제안한 정책운용 체계인 통합적 물가안정목표제(IIT)의 국내 적용 가능성을 점검해 보고, 정책적 시사점을 도출해 보았다. 우선 VAR 모형을 통해 통화정책의 주택가격, 가계부채 파급효과를 살펴본 결과, 금융위기 이후 금리 인하에 따른 위험선호 경향이 뚜렷하게 증대된 것으로 나타났다. 또한 DSGE 모형을 통해 2000년 이후 2021년까지 약 20여 년간의 통화정책 운영 행태를 분석해 본 결과, 한국은행은 기준금리 결정 시 물가와 성장을 종합적으로 고려하면서, 가계신용 증가에도 일부 대응한 것으로 나타나 약한 형태의 IIT를 운영한 것으로 분석되었다. 다만, 금리평활화 계수가 매우 높게 추정되어 금리 조정에 상당히 신중했던 것으로 나타났다. 한편, 중앙은행 손실함수를 최소화하는 최적 금리준칙을 추정해 본 결과, 물가와 성장을 균형적으로 감안하면서, 경제 여건 변화에 대응하여 기준금리를 보다 적극적으로 조정하고, 소득 여건에 비해 가계부채가 빠르게 증가하는 경우에는 가계신용 상황에도 유의하는 정책이 바람직한 정책방안으로 분석되었다. 이 같은 연구결과를 고려할 때 BIS가 제안한 통합적 물가안정목표제는 중장기시계에서 우리 경제의 안정적 성장을 뒷받침할 수 있는 정책체계 대안으로 고려해 볼 수 있을 것으로 판단된다.

• 대한교통학회:학술대회논문집
• /
• 대한교통학회 1995년도 제27회 학술발표회
• /
• pp.101-113
• /
• 1995

The objective of this research is to test the feasibility of developing a statewide truck traffic forecasting methodology for Wisconsin by using Origin-Destination surveys, traffic counts, classification counts, and other data that are routinely collected by the Wisconsin Department of Transportation (WisDOT). Development of a feasible model will permit estimation of future truck traffic for every major link in the network. This will provide the basis for improved estimation of future pavement deterioration. Pavement damage rises exponentially as axle weight increases, and trucks are responsible for most of the traffic-induced damage to pavement. Consequently, forecasts of truck traffic are critical to pavement management systems. The pavement Management Decision Supporting System (PMDSS) prepared by WisDOT in May 1990 combines pavement inventory and performance data with a knowledge base consisting of rules for evaluation, problem identification and rehabilitation recommendation. Without a r.easonable truck traffic forecasting methodology, PMDSS is not able to project pavement performance trends in order to make assessment and recommendations in the future years. However, none of WisDOT's existing forecasting methodologies has been designed specifically for predicting truck movements on a statewide highway network. For this research, the Origin-Destination survey data avaiiable from WisDOT, including two stateline areas, one county, and five cities, are analyzed and the zone-to'||'&'||'not;zone truck trip tables are developed. The resulting Origin-Destination Trip Length Frequency (00 TLF) distributions by trip type are applied to the Gravity Model (GM) for comparison with comparable TLFs from the GM. The gravity model is calibrated to obtain friction factor curves for the three trip types, Internal-Internal (I-I), Internal-External (I-E), and External-External (E-E). ~oth "macro-scale" calibration and "micro-scale" calibration are performed. The comparison of the statewide GM TLF with the 00 TLF for the macro-scale calibration does not provide suitable results because the available 00 survey data do not represent an unbiased sample of statewide truck trips. For the "micro-scale" calibration, "partial" GM trip tables that correspond to the 00 survey trip tables are extracted from the full statewide GM trip table. These "partial" GM trip tables are then merged and a partial GM TLF is created. The GM friction factor curves are adjusted until the partial GM TLF matches the 00 TLF. Three friction factor curves, one for each trip type, resulting from the micro-scale calibration produce a reasonable GM truck trip model. A key methodological issue for GM. calibration involves the use of multiple friction factor curves versus a single friction factor curve for each trip type in order to estimate truck trips with reasonable accuracy. A single friction factor curve for each of the three trip types was found to reproduce the 00 TLFs from the calibration data base. Given the very limited trip generation data available for this research, additional refinement of the gravity model using multiple mction factor curves for each trip type was not warranted. In the traditional urban transportation planning studies, the zonal trip productions and attractions and region-wide OD TLFs are available. However, for this research, the information available for the development .of the GM model is limited to Ground Counts (GC) and a limited set ofOD TLFs. The GM is calibrated using the limited OD data, but the OD data are not adequate to obtain good estimates of truck trip productions and attractions .. Consequently, zonal productions and attractions are estimated using zonal population as a first approximation. Then, Selected Link based (SELINK) analyses are used to adjust the productions and attractions and possibly recalibrate the GM. The SELINK adjustment process involves identifying the origins and destinations of all truck trips that are assigned to a specified "selected link" as the result of a standard traffic assignment. A link adjustment factor is computed as the ratio of the actual volume for the link (ground count) to the total assigned volume. This link adjustment factor is then applied to all of the origin and destination zones of the trips using that "selected link". Selected link based analyses are conducted by using both 16 selected links and 32 selected links. The result of SELINK analysis by u~ing 32 selected links provides the least %RMSE in the screenline volume analysis. In addition, the stability of the GM truck estimating model is preserved by using 32 selected links with three SELINK adjustments, that is, the GM remains calibrated despite substantial changes in the input productions and attractions. The coverage of zones provided by 32 selected links is satisfactory. Increasing the number of repetitions beyond four is not reasonable because the stability of GM model in reproducing the OD TLF reaches its limits. The total volume of truck traffic captured by 32 selected links is 107% of total trip productions. But more importantly, ~ELINK adjustment factors for all of the zones can be computed. Evaluation of the travel demand model resulting from the SELINK adjustments is conducted by using screenline volume analysis, functional class and route specific volume analysis, area specific volume analysis, production and attraction analysis, and Vehicle Miles of Travel (VMT) analysis. Screenline volume analysis by using four screenlines with 28 check points are used for evaluation of the adequacy of the overall model. The total trucks crossing the screenlines are compared to the ground count totals. L V/GC ratios of 0.958 by using 32 selected links and 1.001 by using 16 selected links are obtained. The %RM:SE for the four screenlines is inversely proportional to the average ground count totals by screenline .. The magnitude of %RM:SE for the four screenlines resulting from the fourth and last GM run by using 32 and 16 selected links is 22% and 31 % respectively. These results are similar to the overall %RMSE achieved for the 32 and 16 selected links themselves of 19% and 33% respectively. This implies that the SELINICanalysis results are reasonable for all sections of the state.Functional class and route specific volume analysis is possible by using the available 154 classification count check points. The truck traffic crossing the Interstate highways (ISH) with 37 check points, the US highways (USH) with 50 check points, and the State highways (STH) with 67 check points is compared to the actual ground count totals. The magnitude of the overall link volume to ground count ratio by route does not provide any specific pattern of over or underestimate. However, the %R11SE for the ISH shows the least value while that for the STH shows the largest value. This pattern is consistent with the screenline analysis and the overall relationship between %RMSE and ground count volume groups. Area specific volume analysis provides another broad statewide measure of the performance of the overall model. The truck traffic in the North area with 26 check points, the West area with 36 check points, the East area with 29 check points, and the South area with 64 check points are compared to the actual ground count totals. The four areas show similar results. No specific patterns in the L V/GC ratio by area are found. In addition, the %RMSE is computed for each of the four areas. The %RMSEs for the North, West, East, and South areas are 92%, 49%, 27%, and 35% respectively, whereas, the average ground counts are 481, 1383, 1532, and 3154 respectively. As for the screenline and volume range analyses, the %RMSE is inversely related to average link volume. 'The SELINK adjustments of productions and attractions resulted in a very substantial reduction in the total in-state zonal productions and attractions. The initial in-state zonal trip generation model can now be revised with a new trip production's trip rate (total adjusted productions/total population) and a new trip attraction's trip rate. Revised zonal production and attraction adjustment factors can then be developed that only reflect the impact of the SELINK adjustments that cause mcreases or , decreases from the revised zonal estimate of productions and attractions. Analysis of the revised production adjustment factors is conducted by plotting the factors on the state map. The east area of the state including the counties of Brown, Outagamie, Shawano, Wmnebago, Fond du Lac, Marathon shows comparatively large values of the revised adjustment factors. Overall, both small and large values of the revised adjustment factors are scattered around Wisconsin. This suggests that more independent variables beyond just 226; population are needed for the development of the heavy truck trip generation model. More independent variables including zonal employment data (office employees and manufacturing employees) by industry type, zonal private trucks 226; owned and zonal income data which are not available currently should be considered. A plot of frequency distribution of the in-state zones as a function of the revised production and attraction adjustment factors shows the overall " adjustment resulting from the SELINK analysis process. Overall, the revised SELINK adjustments show that the productions for many zones are reduced by, a factor of 0.5 to 0.8 while the productions for ~ relatively few zones are increased by factors from 1.1 to 4 with most of the factors in the 3.0 range. No obvious explanation for the frequency distribution could be found. The revised SELINK adjustments overall appear to be reasonable. The heavy truck VMT analysis is conducted by comparing the 1990 heavy truck VMT that is forecasted by the GM truck forecasting model, 2.975 billions, with the WisDOT computed data. This gives an estimate that is 18.3% less than the WisDOT computation of 3.642 billions of VMT. The WisDOT estimates are based on the sampling the link volumes for USH, 8TH, and CTH. This implies potential error in sampling the average link volume. The WisDOT estimate of heavy truck VMT cannot be tabulated by the three trip types, I-I, I-E ('||'&'||'pound;-I), and E-E. In contrast, the GM forecasting model shows that the proportion ofE-E VMT out of total VMT is 21.24%. In addition, tabulation of heavy truck VMT by route functional class shows that the proportion of truck traffic traversing the freeways and expressways is 76.5%. Only 14.1% of total freeway truck traffic is I-I trips, while 80% of total collector truck traffic is I-I trips. This implies that freeways are traversed mainly by I-E and E-E truck traffic while collectors are used mainly by I-I truck traffic. Other tabulations such as average heavy truck speed by trip type, average travel distance by trip type and the VMT distribution by trip type, route functional class and travel speed are useful information for highway planners to understand the characteristics of statewide heavy truck trip patternS. Heavy truck volumes for the target year 2010 are forecasted by using the GM truck forecasting model. Four scenarios are used. Fo~ better forecasting, ground count- based segment adjustment factors are developed and applied. ISH 90 '||'&'||' 94 and USH 41 are used as example routes. The forecasting results by using the ground count-based segment adjustment factors are satisfactory for long range planning purposes, but additional ground counts would be useful for USH 41. Sensitivity analysis provides estimates of the impacts of the alternative growth rates including information about changes in the trip types using key routes. The network'||'&'||'not;based GMcan easily model scenarios with different rates of growth in rural versus . . urban areas, small versus large cities, and in-state zones versus external stations. cities, and in-state zones versus external stations.

• 한국문헌정보학회지
• /
• 제24권
• /
• pp.289-332
• /
• 1993

In china, six bibliographies of offical historical books are evaluated at the most important things among the systematically-editing bibliographies. These bibliographies would be usful to study the orign of classical sciences and their development, bibliographic research of Chinese classics, bibliographic judgement on genuine books, titles, authors, volumes. They could be refered to research into graving, correcting, and existence of ancient books. therefore, these bibliographies would be applied to estimation the phase of scientific and cultural development. The study of these bibliographies has been not yet made in Korea. This thesis lays its importance on the background of their appearance, their classification norms, organizing system of their catalogue, and comparison between their difference. 1. Editing and compiling of Chilyak (칠약) by Liu Chin (유흠) and official histories played an important role of entering an apperance of historical book's bibliographies. Chilyak has been lost. However, its classification and compiling system of classical books would be traced by Hansoyemunji(한서예문지) of which basic system is similar to Chilyak. It classified books according to their scientific characteristic. If a few books didn't have their own categories, they were combined by the circles parallel to the books' characteristic. With the books classified under the same scientific characteristic, they were again divided into the scientific schools or structures. It also arranged the same kinds of books according to the chronology. The some books wi th duplicate subjects were classified multiplely by their duplicate subject. 2. Ssu-ma Chon's (사마천) The Historical Records (Saki, 사기) and Pan Ku's (반고) The History of the Former Han Dynasty (Hanso, 한서) has also took effects on appearance of historical books' bibliographies. Covering overall history, Saki was structured by the five parts: The basic annals(본기), the chronological tables (표), the documents (서), the hereditary houses (세가), biographies (열전). The basic annals dealt with kings and courts' affairs according to the chronology. The chronological tables was the records of the annals. The documents described overall the social and cultural systems. The hereditary houses recorded courts' meritorious officials and public figures. The biographies showed exemplars of seventy peoples selected by their social status. Pan Ku(반구)'s The History of the Former Han Dynasty(한서) deserved to be called the prototype for the offical histories after Saki's (사기; The Historical Records) apperance. Although it modelled on Saki, it had set up its own cataloguing system. It was organized by four parts; the basic annals (본기), the chronological tables (표), treatises(지), biographies (열전). The documents in the Hanso(한서) was converted into treatises(지). The hereditary houses and biographies were merged. For the first time, the treatise with The Yemunji could operate function for historical bibliographies. 3. There were six historical bibliographies: Hansoyemunji(한서예문지), Susokyongjeokji (수서경적지), Kudangsokyongjeokji(구당서경적지), Shindangsoyemunji (신당서예문지), Songsayemunji (송사예문지), Myongsayemunji (명사예문지). 1) Modelling on Liu Chin's Chilyak except Chipryak(집략), Hansoyemunji divided the characteristic of the books and documents into six parts: Yukrye(육예), Cheja(제자), Shibu(시부), Pyongsoh(병서), Susul(수술), Pangki(방기). Under six parts, there were thirty eight orders in Hansoyemunji. To its own classification, Hansoyemunji applied the Chilyak's theory of classification that the books or documents were managed according to characteristic of sciences, the difference of schools, the organization of sentences. However the overlapped subjects were deleted and unified into one. The books included into an unsuitable subject were corrected and converted into another. The Hansoyemunji consisted of main preface (Taesoh 대서), minor preface (Sosoh 소서) , the general preface (Chongso 총서). It also recorded the introduction of books and documents, the origin of sciences, the outline of subjects, and the establishment of orders. The books classified by the subject had title, author, and volumes. They were rearranged by titles and the chronological publication year. Sometimes author was the first access point to catalogue the books. If it was necessary for the books to take footnotes, detail notes were formed. The Volume number written consecutively to order and subject could clarify the quantity of books. 2) Refering to Classfication System by Seven Norms (칠분법) and Classification System by Four Norms(사분법), Susokyongjeokji(수서경적지) had accomplished the classification by four norms. In fact, its classification largely imitated Wanhyosoh(완효서)'s Chilrok(칠록), Susokyongjeokji's system of classification consisted of four parts-Kyung(경), Sa(사), Cha(자), Chip(칩). The four parts were divided into 40 orders. Its appendix was again divided into two parts, Buddihism and Taiosm. Under the two parts there were fifteen orders. Totally Susokyongjeokji was made of six parts and fifty five orders. In comparison with Hansoyemunji(한서예문지), it clearly showed the conception of Kyung, Sa, Cha, Chip. Especially it deserved to be paid attention that Hansoyemunji laied history off Chunchu(춘추) and removed history to Sabu(사부). However Chabu(사부) put many contrary subjects such as Cheja(제자), Kiye(기예), Sulsu(술수), Sosol(소설) into the same boundary, which committed errors insufficient theoretical basis. Anothor demerit of Susokyongjeokji was that it dealt with Taiosm scriptures and Buddism scriptures at the appendix because they were considered as quasi-religion. Its compilation of bibliographical facts consisted of main preface(Taesoh 대서), minor preface(Sosoh 소서), general preface (Chongsoh 총서), postscript (Husoh 후서). Its bibliological facts mainly focused on the titles. Its recorded authors' birth date and their position. It wrote the lost and existence of books consecutive to total number of books, which revealed total of the lost books in Su Dynasty. 3) Modelling on the basis of Kokumsorok(고분서록) and Naewaekyongrok(내외경록), Kudangsokyongjeokji(구당서경적지) had four parts and fourty five orders. It was estimated as the important role of establishing basic frame of classification by four norms in classification theory's history. However it had also its own limit. Editing and compling orders of Kudangsokyongjeokji had been not progressively changed. Its orders imitated by and large Susokyongjeokji. In Its system of organizing catalogue, with its minor preface and general preface deleting, Kudangsokyongjeokji by titles after orders sometimes broke out confusion because of unclear boundaries between orders. 4) Shindangsoyemunji(신당서예문지), adding 28,469 books to Kudangsokyongjeokji, recorded 82,384 books which were divided by four parts and fourty four orders. In comparison with Kudangkyongjeokj, Sindangsoyemunji corrected unclear order's norm. It merged the analogical norms four orders (for instance, Kohun 고훈 and Sohakryu 소학류) and seperated the different norms four orders (for example, Hyokyong 효경 and Noneuhryu 논어류, Chamwi 참위 and Kyonghaeryu 경해류, Pyonryon 편년 and Wisaryu 위사류). Recording kings' behaviors and speeches (Kikochuryu 기거주류) in the historical parts induced the concept of specfication category. For the first time, part of Chipbu (집부) set up the order of classification norm for historical and literatural books and documents (Munsaryu 문사류). Its editing and compiling had been more simplified than Kudangsokyongjeokji. Introduction was written at first part of bibliographies. Appendants except bibliographic items such subject, author, title, volume number, total were omitted. 5) Songsayemunji(송사예문지) were edited in the basis of combining Puksong(북송) and Namsong(남송), depending on Sabukuksayemunji(사부국사예문지). Generally Songsayemunji had lost a lot of bibliographical facts of many books. They were duplicated and wrongly classified books because it committed an error of the incorrectly annalistic editing. Particularly Namsong showed more open these defaults. Songsayemunji didin't include the books published since the king Youngchong(영종). Its system of classification was more better controlled. Chamwiryu(참위류) in the part of Kyongbu(경부) was omitted. In the part of history(Sabu 사부), recordings of kings' behaviors and speeches more merged in the annals. Historical abstract documents (Sachoryu 사초류) were seperately arranged. In the part of Chabu(자부), Myongdangkyongmaekryu(명당경맥류) and Euisulryu(의술류) were combined. Ohangryu(오행류) were laied off Shikuryu(시구류). In the part of Chipbu(집부), historical and literatural books (Munsaryu 문사류) were independentely arranged. There were the renamed orders; from Wisa(위사) to Paesa(패사), Chapsa (잡사) to Pyolsa(열사), Chapchonki(잡전기) to Chonki(전기), Ryusoh(류서) to Ryusa(류서). Introduction had only main preface. The books of each subject catalogued by title, the volume number, and author and arranged mainly by authors. Annotations were written consecutively after title and the volume number. In the afternote the number of not-treated books were revealed. Difference from Singdangsohyemunji(신당서예문지) were that the concept and boundary of orders became more clearer. It also wrote the number of books consecutive to main subject. 6) Modelling on Chonkyongdangsomok (경당서목), Myongsayemunji(명사예문지) was compiled in the basis of books and documents published in the Ming Danasty. In classification system, Myongsayemunji partly merged and the seperated some orders for it. It also deleted and renamed some of orders. In case of necessity, combining of orders' norm was occured particulary in the part of Sabu(사부) and Chabu(자부). Therefore these merging of orders norm didn't offer sufficient theretical background. For example, such demerits were seen in the case that historical books edited by annals were combined with offical historical ones which were differently compiled and edited from the former. In the part of Chabu(자부), it broke out another confusion that Pubga(법가), Meongga(명가), Mukga(묵가), Chonghweongka's(종횡가) thoughts were classified in the Chapka(잡가). Scriptures of Taiosim and Buddhism were seperated from each other. There were some deleted books such as Mokrokryu(목록류), Paesaryu(패사류) in the part of history (Sabu 사부) and Chosaryu(초사류) in the part of Chipbu(집부). The some in the each orders had been renamed. Imitating compiling system of Songsayemunji(송사예문지), with reffering to its differ-ence, Myongsayemunji(명사예문지) wrote the review and the change of the books by author. The number of not-treated books didn't appear at the total. It also deleted the total following main subject.