• Title/Summary/Keyword: Function

Search Result 69,796, Processing Time 0.093 seconds

A Study on the Wind Ventilation Forest Planning Techniques for Improving the Urban Environment - A Case Study of Daejeon Metropolitan City - (도시환경 개선을 위한 바람길숲 조성 계획기법 개발 연구 - 대전광역시를 사례로 -)

  • Han, Bong-Ho;Park, Seok-Cheol;Park, Soo-Young
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.51 no.2
    • /
    • pp.28-41
    • /
    • 2023
  • The objective of the study was to develop an Urban Windway Forest Creation Planning Technique for the Improvement of the Urban Environment using the case of Daejeon Metropolitan City. Through a spatial analysis of fine dust and heat waves, a basin zone, in which the concentration was relatively serious, was derived, and an area with the potential of cold air flow was selected as the target area for the windway forest development by analyzing the climate and winds in the relevant zone. Extreme fine dust areas included the areas of the Daejeon Industrial Complex Regeneration Business District in Daedeok-gu and Daedeok Techno Valley in Yuseong-gu. Heat wave areas included the areas of Daedeok industrial Complex in Moksang-dong, the Daejeon Industrial Complex Regeneration Business District in Daehwa-dong, and the high-density residential area in Ojeong-dong. As a result of measuring the wind speeds in Daejeon with an Automatic Weather System, the average wind speeds during the day and night were 0.1 to 1.7 m/s,, respectively. So, a plan of for a windway forest that smoothly induces the movement of cold air formed in outer forests at night is required. The fine dust/heat wave intensive management zones of Daejeon Metropolitan City were Daejeoncheon, Yudeungcheon, Gapcheon-Yudeungcheon, and Gapcheon. The windway forest formation plan case involved the old city center of Daejeon Metropolitan City among the four zones, the Gapcheon-Yudeungcheon area, in which the windway formation effect was presumed to be high. The Gapcheon-Yudeungcheon area is a downtown area that benefits from the cold and fresh air generated on Mt. Gyejok and Mt. Wuseong, which are outer forests. Accordingly, the windway forest was planned to spread the cold air to the city center by connecting the cold air generated in the Seosa-myeon forest of Mt. Gyejok and the Namsa-myeon forest of Mt. Wuseong through Gapcheon, Yudeungcheon, and street forests. After selecting the target area for the wind ventilation forest, a climate map and wind formation function evaluation map were prepared for the area, the status of variation wind profiles (night), the status of fine dust generation, and the surface temperature distribution status were grasped in detail. The wind ventilation forest planning concept and detailed target sites by type were identified through this. In addition, a detailed action plan was established according to the direction of creation and setting of the direction of creation for each type of wind ventilation forest.

Fish Community Structures and Distribution Characteristics of Fisheries Resources in the Osip Stream and Wangpi Stream, Fishery Resources Protection Areas (내수면 수산자원보호구역 오십천 및 왕피천의 어류군집 구조 및 수산자원 분포특성)

  • Kyung-hoon Kim;Jin-wang Lee;Young-bin Jo;Jae-Hyun Lim;Ji-Woong Choi
    • Korean Journal of Ecology and Environment
    • /
    • v.56 no.1
    • /
    • pp.57-69
    • /
    • 2023
  • The objectives of this study were to analyze the fish community structures and distribution characteristics of fisheries resources in the Osip Stream and Wangpi Stream, fishery resources protection areas. For the study, we conducted fish samplings four times in the two streams from April to October 2019. In Osip Stream and Wangpi Stream, we sampled 31 species and 29 species and the dominant species were Zacco platypus (28.6%) and Squalidus multimaculatus(41.7%), respectively. According to the life type of fish species, primary freshwater species were collected 18 species(58.1%) and 21 species(72.4%), and migration fishes were sampled 4 species (12.9%) and 6 species (20.7%) in Osip Stream and Wangpi Stream, respectively. Fisheries resources species showed high relative abundance in June, and the fish biomass was highest in October. As a results of comparing the previous studies with this study, both rivers showed high biodiversity and were found to maintain stable populations of fishes. According to analysis of tolerance guilds, the proportion of tolerant species, based on the number of individuals, was composed of 14.4% and 1.1% in Osip Stream and Wangpi Stream, respectively. This very low ratio of tolerant species confirmed that both streams have very good physiochemical environment conditions. From the above results, it was judged that the fishery resource protection areas of Osip Stream and Wangpi Stream have high ecological function and preservation value. For sustainable use and management of fishery resource protection areas of Osip Stream and Wangpi Stream, it is suggested that biological disturbance management, fish discharge projects considering environmental capacity, efforts to improve the habitat environment, and establishing a fishery resource protection areas management system were necessary as considerations.

Efficiency of Density Gradient Centrifugation Method (Ludox method) Based on eDNA for the Analysis of Harmful Algal Bloom Potential (유해남조류 발생 잠재성 분석을 위한 eDNA 기반의 퇴적물 전처리 방법: 밀도 구배 원심분리법(Ludox method))

  • Kyeong-Eun Yoo;Hye-In Ho;Hyunjin Kim;Keonhee Kim;Soon-Jin Hwang
    • Korean Journal of Ecology and Environment
    • /
    • v.56 no.1
    • /
    • pp.36-44
    • /
    • 2023
  • Environmental DNA (eDNA) can exist in both intracellular and extracellular forms in natural ecosystems. When targeting harmful cyanobacteria, extracellular eDNA indicates the presence of traces of cyanobacteria, while intracellular eDNA indicates the potential for cyanobacteria to occur. However, identifying the "actual" potential for harmful cyanobacteria to occur is difficult using the existing sediment eDNA analysis method, which uses silica beads and cannot distinguish between these two forms of eDNA. This study analyzes the applicability of a density gradient centrifugation method (Ludox method) that can selectively analyze intracellular eDNA in sediment to overcome the limitations of conventional sediment eDNA analysis. PCR was used to amplify the extracted eDNA based on the two different methods, and the relative amount of gene amplification was compared using electrophoresis and Image J application. While the conventional bead beating method uses sediment as it is to extract eDNA, it is unknown whether the mic gene amplified from eDNA exists in the cyanobacterial cell or only outside of the cell. However, since the Ludox method concentrates the intracellular eDNA of the sediment through filtration and density gradient, only the mic gene present in the cyanobacteria cells could be amplified. Furthermore, the bead beating method can analyze up to 1 g of sediment at a time, whereas the Ludox method can analyze 5 g to 30 g at a time. This gram of sediments makes it possible to search for even a small amount of mic gene that cannot be searched by conventional bead beating method. In this study, the Ludox method secured sufficient intracellular gene concentration and clearly distinguished intracellular and extracellular eDNA, enabling more accurate and detailed potential analysis. By using the Ludox method for environmental RNA expression and next-generation sequencing (NGS) of harmful cyanobacteria in the sediment, it will be possible to analyze the potential more realistically.

Development of deep learning structure for complex microbial incubator applying deep learning prediction result information (딥러닝 예측 결과 정보를 적용하는 복합 미생물 배양기를 위한 딥러닝 구조 개발)

  • Hong-Jik Kim;Won-Bog Lee;Seung-Ho Lee
    • Journal of IKEEE
    • /
    • v.27 no.1
    • /
    • pp.116-121
    • /
    • 2023
  • In this paper, we develop a deep learning structure for a complex microbial incubator that applies deep learning prediction result information. The proposed complex microbial incubator consists of pre-processing of complex microbial data, conversion of complex microbial data structure, design of deep learning network, learning of the designed deep learning network, and GUI development applied to the prototype. In the complex microbial data preprocessing, one-hot encoding is performed on the amount of molasses, nutrients, plant extract, salt, etc. required for microbial culture, and the maximum-minimum normalization method for the pH concentration measured as a result of the culture and the number of microbial cells to preprocess the data. In the complex microbial data structure conversion, the preprocessed data is converted into a graph structure by connecting the water temperature and the number of microbial cells, and then expressed as an adjacency matrix and attribute information to be used as input data for a deep learning network. In deep learning network design, complex microbial data is learned by designing a graph convolutional network specialized for graph structures. The designed deep learning network uses a cosine loss function to proceed with learning in the direction of minimizing the error that occurs during learning. GUI development applied to the prototype shows the target pH concentration (3.8 or less) and the number of cells (108 or more) of complex microorganisms in an order suitable for culturing according to the water temperature selected by the user. In order to evaluate the performance of the proposed microbial incubator, the results of experiments conducted by authorized testing institutes showed that the average pH was 3.7 and the number of cells of complex microorganisms was 1.7 × 108. Therefore, the effectiveness of the deep learning structure for the complex microbial incubator applying the deep learning prediction result information proposed in this paper was proven.

Estimation of the CY Area Required for Each Container Handling System in Mokpo New Port (목표 신항만의 터미널 운영시스템에 따른 CY 소요면적 산정에 관한 연구)

  • Keum, J.S.
    • Journal of Korean Port Research
    • /
    • v.12 no.1
    • /
    • pp.35-46
    • /
    • 1998
  • The CY can be said to function in various respect as a buffer zone between the maritime and overland inflow-outflow of container. The amount of storage area needed requires a very critical appraisal at pre-operational stage. A container terminal should be designed to handle and store containers in the most efficient and economic way possible. In order to achieve this aim it is necessary to figure out or forecast numbers and types of containers to be handled, CY area required, and internal handling systems to be adopted. This paper aims to calculate the CY area required for each container handling system in Mokpo New Port. The CY area required are directly dependent on the equipment being used and the storage demand. And also the CY area required depends on the dwell time. Furthermore, containers need to be segregated by destination, weight, class, FCL(full container load), LCL(less than container load), direction of travel, and sometimes by type and often by shipping line or service. Thus the full use of a storage area is not always possible as major unbalances and fluctuations in these flow occuring all the time. The calculating CY area must therefore be taken into account in terms of these operational factors. For solving such problem, all these factors have been applied to estimation of CY area in Mokpo New Port. The CY area required in Mokpo New Port was summarized in the conclusion section.

  • PDF

Design of a Dual Band-pass Filter Using Fork-type Open Stubs and SIR Structure (포크 형태의 개방형 스터브 및 SIR 구조를 이용한 이중대역 대역통과 여파기의 설계)

  • Tae-Hyeon Lee
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.22 no.1
    • /
    • pp.252-264
    • /
    • 2023
  • This paper proposes a design of a dual-band band-pass filter that integrates a λg/2 open SIR structure, a transmission line, and a fork-type structure with symmetric and asymmetric open stubs. To obtain the dual-band effect, the proposed filter uses the SIR structure and adjusts the impedance ratio of the SIR structure. Therefore, the position of the harmonics of the filter is shifted through the adjustment of the impedance ratio, and this can obtain a double-band effect. In order to obtain the dual-band characteristics, the dual-band effect is obtained by inserting a open stub between the SIR structures with the SIR structure divided in half. In addition, the second frequency response is obtained by adjusting the length of the open symmetrical stub in the fork-shaped structure. The asymmetrical open stub in the fork form achieves optimum bandwidth by adjusting the length. Therefore, the first center frequency of the proposed band-pass filter is 5.896 GHz and the bandwidth is 13.6 %. At this time, the measurement results are 0.13 dB and 33.6 dB. The second center frequency is 5.906 GHz and the bandwidth is 13.6 %. At this time, the measurement results are 0.15 dB and 19.8 dB. The reason is that when the impedance ratio (Δ) is higher than 1, the position of the harmonic is shifted to a lower frequency band. However, if the impedance ratio (Δ) is lowered by one step, the position of harmonics will move to a higher frequency band. The function of the filter designed using these characteristics can be obtained from the measurement result. The proposed band-pass filter has no coupling loss and no via energy concentration loss because there is no coupling structure of input/output and no via hole. Therefore, system integration is possible due to its excellent performance, and it is expected that dedicated short-range communication (DSRC) system applications used in traffic communication systems will be possible.

A Method of Reproducing the CCT of Natural Light using the Minimum Spectral Power Distribution for each Light Source of LED Lighting (LED 조명의 광원별 최소 분광분포를 사용하여 자연광 색온도를 재현하는 방법)

  • Yang-Soo Kim;Seung-Taek Oh;Jae-Hyun Lim
    • Journal of Internet Computing and Services
    • /
    • v.24 no.2
    • /
    • pp.19-26
    • /
    • 2023
  • Humans have adapted and evolved to natural light. However, as humans stay in indoor longer in modern times, the problem of biorhythm disturbance has been induced. To solve this problem, research is being conducted on lighting that reproduces the correlated color temperature(CCT) of natural light that varies from sunrise to sunset. In order to reproduce the CCT of natural light, multiple LED light sources with different CCTs are used to produce lighting, and then a control index DB is constructed by measuring and collecting the light characteristics of the combination of input currents for each light source in hundreds to thousands of steps, and then using it to control the lighting through the light characteristic matching method. The problem with this control method is that the more detailed the steps of the combination of input currents, the more time and economic costs are incurred. In this paper, an LED lighting control method that applies interpolation and combination calculation based on the minimum spectral power distribution information for each light source is proposed to reproduce the CCT of natural light. First, five minimum SPD information for each channel was measured and collected for the LED lighting, which consisted of light source channels with different CCTs and implemented input current control function of a 256-steps for each channel. Interpolation calculation was performed to generate SPD of 256 steps for each channel for the minimum SPD information, and SPD for all control combinations of LED lighting was generated through combination calculation of SPD for each channel. Illuminance and CCT were calculated through the generated SPD, a control index DB was constructed, and the CCT of natural light was reproduced through a matching technique. In the performance evaluation, the CCT for natural light was provided within the range of an average error rate of 0.18% while meeting the recommended indoor illumination standard.

Distribution characteristics of macroinvertebrates in an agricultural paddy field and irrigation pond ecosystems in a farmer's practice manual on the village of the Agricultural Environment Conservation Program (농업 환경보전 프로그램 대상마을의 논과 둠벙 생태계의 저서성대형무척추동물 분포 특성)

  • I-Chan Shin;Seung-Hyun Lee;Young-Mi Lee;Ji-Young Yoon;Sung-Jun Hong;Hyun-Jo Yoon;Sang-Goo Park;Eun-Jung Han
    • Korean Journal of Environmental Biology
    • /
    • v.40 no.2
    • /
    • pp.148-156
    • /
    • 2022
  • Ecological occupation in irrigation ponds is a well-acknowledged fact that is essential for biodiversity conservation in agricultural ecosystems. However, there are few studies on the ecological functions and relationship between a paddy field and irrigation using macroinvertebrates in an environmentally friendly paddy field. The objective of this study is to identify the community and distribution characteristics of macroinvertebrates in an agricultural paddy field and irrigation pond ecosystems, and to provide basic data on the ecological function of an environmentally friendly paddy field. Macroinvertebrate sampling was conducted from May to September in an agricultural paddy field and irrigation pond in an environment-friendly paddy field in Boryeong city. We conducted a study to identify the distribution characteristics using macroinvertebrate species analysis, such as Functional Feeding Groups (FFGs), Habitat Oriented Groups (HOGs), rarefaction curve, and a two-way dendrogram. A total of 37 species of macroinvertebrates in 28 families, 13 orders were collected study during the period of the investigation. Dominant taxa of macroinvertebrates included Coleoptera, Hemiptera, and Odonata. In terms of FFGs, predators and gathering collectors accounted for approximately 70%, in relation to HOGs, and climbers and swimmers occupied more than 50% from both the paddy field and irrigation pond. With respect to the rarefaction curve, the irrigation pond (July) was high as E (S, 141)=18 species, while the paddy field (May) was comparatively low as E (S, 141)=9 species. In conclusion, our results revealed that macroinvertebrates, such as Notonecta triguttata, Peltodytes intermedius, Appasus major, Laccotrephes japonensis, Appasus japonicus, Sigara substriata, Enochrus simulans, and Sternolophus rufipes, were used as a habitat and spawning ground in both paddy field and irrigation pond. The irrigation pond appears to be a very important spawning ground for macroinvertebrates.

Behaviors of Soft Bangkok Clay behind Diaphragm Wall Under Unloading Compression Triaxial Test (삼축압축 하에서 지중연속벽 주변 방콕 연약 점토의 거동)

  • Le, Nghia Trong;Teparaksa, Wanchai;Mitachi, Toshiyuki;Kawaguchi, Takayuki
    • Journal of the Korean Geotechnical Society
    • /
    • v.23 no.9
    • /
    • pp.5-16
    • /
    • 2007
  • The simple linear elastic-perfectly plastic model with soil parameters $s_u,\;E_u$ and n of undrained condition is usually applied to predict the displacement of a constructed diaphragm wall(DW) on soft soils during excavation. However, the application of this soil model for finite element analysis could not interpret the continued increment of the lateral displacement of the DW for the large and deep excavation area both during the elapsed time without activity of excavation and after finishing excavation. To study the characteristic behaviors of soil behind the DW during the periods without excavation, a series of tests on soft Bangkok clay samples are simulated in the same manner as stress condition of soil elements happening behind diaphragm wall by triaxial tests. Three kinds of triaxial tests are carried out in this research: $K_0$ consolidated undrained compression($CK_0U_C$) and $K_0$ consolidated drained/undrained unloading compression with periodic decrement of horizontal pressure($CK_0DUC$ and $CK_0UUC$). The study shows that the shear strength of series $CK_0DUC$ tests is equal to the residual strength of $CK_0UC$ tests. The Young's modulus determined at each decrement step of the horizontal pressure of soil specimen on $CK_0DUC$ tests decreases with increase in the deviator stress. In addition, the slope of Critical State Line of both $CK_0UC$ and $CK_0DUC$ tests is equal. Moreover, the axial and radial strain rates of each decrement of horizontal pressure step of $CK_0DUC$ tests are established with the function of time, a slope of critical state line and a ratio of deviator and mean effective stress. This study shows that the results of the unloading compression triaxial tests can be used to predict the diaphragm wall deflection during excavation.

Control of Sperm Penetration In Vitro by Cumulus Cells in Porcine Oocytes (돼지의 체외수정시 난구세포에 의한 정자침입의 조절)

  • Park, C.K.;Cheong, H.T.;Lee, J.H.;Kim, I.C.;Yang, B.K.;Kim, C.I.
    • Korean Journal of Animal Reproduction
    • /
    • v.23 no.2
    • /
    • pp.149-157
    • /
    • 1999
  • The functional role of cumulus cells on the penetration and polyspermy during in vitro fertilization in porcine was examined. The penetration rate was significantly higher (P<0.01) in oocytes with (61%) than without (25%) cumulus cells, but significant differences in polysper-my rates were not observed. When hyaluronidase was added to the fertilization medium with different concentrations, penetration rates in oocytes with cumulus cells were higher than in oocytes without cumulus cells at 0 (61% vs 34% ; P<0.05), 0.01 (56% vs 35% ; P<0.05), 0.1 (66% vs 30% ; P<0.05) and 1.0mg/$m\ell$ (39% vs 27%). The polyspermy rates were lower in oocytes without than with cumulus cells, and had a tendency to decrease with high concentrations of hyaluronidase. In another experiment, the penetration and polyspermy rates had a tendency to increase as time of sperm-oocyte culture was prolonged. At 16 and 20 h after insemination, the penetration rates were significantly higher (P<0.05) in oocytes with (48 and 62% for 16 and 20 h) than without (25 and 31% for 16 and 20 h) cumulus cells in medium containing hyaluronidase. Polyspermy rates were significantly (P<0.05) lower in oocytes without (13% and 16%) than with (37% and 48%) cumulus cells at 16 and 20 h after insemination. In cumulus-free oocytes inseminated in medium containing different concentrations of cumulus cells, the penetration rates were significantly (P<0.05) higher in medium with than without hyaluronidase. The proportion of polyspermy was lower in medium without than with hyaluronidase at 0 (10% vs 0%), 10$^2$(25% vs 0%), 10$^4$(24% vs 14%) and 10$^{6}$ (29% vs 10% ; P<0.05) cumulus cells/$m\ell$. These results suggest that cumulus cells can have a positive influence on sperm penetration, its action on polyspermy control does appear to function primarily on zona pellucida by co-culture of cumulus cells and oocytes in medium without hyaluronidase.

  • PDF