• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.28 no.5
• /
• pp.396-403
• /
• 2006

Changes in cell adhesion molecules are associated with infiltration and metastatic progression of cancer. Reduced expression of E-cadherin and ${\beta}-catenin$ complex in some carcinomas has been reported. The changes in the expression in oral squamous cell carcinoma (OSCC) is not fully understood and it also remains undetermined whether the expression of these adhesion molecules in metastatic lesions differs from that in the primary lesions. In the present study, therefore, we immunohistochemically examined the expression of E-cadherin and ${\beta}-catenin$ in 45 primary OSCCs and 19 metastatic lymph nodes. We compared the expression of these molecules between primary and metastatic lesions and investigated the correlation between the expression and clinicopathologic parameters. The expression of E-cadherin and ${\beta}-catenin$ was reduced in 35/45 (78.2%), 14/45 (31.2%) of primary tumors respectively, but 18/19 (94.7%) and 17/19 (89.4%) of lymph nodes showed preserved expression. The reduced expression of the E-cadherin was associated with lymph node metastasis, invasive mode and marginal status but no significant relationship was not found with ${\beta}-catenin$. In conclusion, the loss of E-cadherin and ${\beta}-catenin$ complex function is associated with progression of OSCC and suggest that the expression of this complex will be a supplementary prognostic tool.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.6
• /
• pp.570-574
• /
• 2005

Keratoacanthoma is a benign, self-limited epithelial lesion that closely resembles Squamous cell carcinoma(SCC). Keratoacanthoma occur primarily exposed skin in male patients over 45 years of ages. although etiology is unknown, sunlight, genetic, and human papillomavirus factor have been considered. in clinical feature, rapid enlargement occurs over 4$\sim$8 weeks, resulting ultimately in a hemispheric, firm, elevated, asymptomatic nodule that contains a central plug of keratin. When fully developed, the keratoacanthoma contains a core of keratin surrounded by a concentric collar of raised skin. Over the next 4$\sim$8 weeks, static lesion persists. Then undergoes spontaneous regression over the next 6$\sim$8weeks period by expulsion of the keratin core with resorption of the mass. In histologic feature, Keratoacanthoma consists of hyperplastic squamous epithelium growing into the underlying connective tissue. The surface is covered by a thickened layer of parakeratin with central plugging. Epithelium cell shows dysplastic features and the margins the normal adjacent epithelium is elevated. The differential diagnosis includes SCC. Keratoacanthoma present as a exophytic lesion with horny keratin occupying a depression on the top of the lesion, persists static period and undergoes rapid growth compared with SCC. Keratoacanthoma is usually treated by surgical excision or curettage of the base, spontaneous regression does not occur in every case. A 60 years old male who present facial lesion visit our hospital and surgical excision was done. Biopsy result was keratoacanthoma. We report case with review of literatures.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.22 no.3
• /
• pp.351-355
• /
• 2000

Penetrating injuries in the head and neck region are not common but can pose difficult situations to manage properly. In small cross-sectional area, the neck housed many vital structures, such as carotid artery, internal jugular vein, cervical spines, esophagus, laryngotracheal complex and nerves. Because each vital structure is located within the fascial compartments, bleeding into these closed spaces can give rise to compression of surrounding structures, which may result in compromised airway. Therefore, management of the penetrating injuries should be based on the fully understanding of anatomical relationships, accurate clinical examinations, a careful history taking and the proper treatment planning. We present two cases of penetrating injuries in the head and neck region and discuss on the clinical considerations for the proper management with the literature review.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.4
• /
• pp.31-37
• /
• 2002

Recently a simplified design procedure as well as load transfer model for seismic steel moment connections with welded straight haunch have been proposed by Lee and Uang. Cyclic seismic testing was conducted to verify the proposed design procedure and to develop the details that will prevent the cracking at the haunch tip, where stress concentration was the highest. All the specimens thus designed effectively pushed plastic hinging away from the haunch tip and were able to develop satisfactory plastic rotation capacity of 0.04 radian with no fracture. A sloped edge combined with drilling a hole near the haunch tip or a pair of stiffeners(partially or fully) extended from the beam web successfully prevented the crack initiation at the haunch tip. The strut action of the haunch web, which had been predicted from the previous analytical study, was also experimentally identified through the strain gage readings.

• Archives of Craniofacial Surgery
• /
• v.20 no.5
• /
• pp.297-303
• /
• 2019

Background: Absorbable plates are widely used in open reduction and internal fixation surgeries for facial bone fractures. Absorbable plates are made of polyglycolic acid (PGA), polylactic acid (PLA), polydioxane (PDS), or various combinations of these polymers. The degradation patterns of absorbable plates made from different polymers and clinical courses of patients treated with such plates have not been fully identified. This study aimed to confirm the clinical courses of facial bone fracture patients using absorbable plates and compare the degradation patterns of the plates. Methods: A retrospective chart review was conducted for 47 cases in 46 patients who underwent open reduction and internal fixation surgery using absorbable plates to repair facial bone fractures. All surgeries used either PLA/PGA composite-based or poly-L-lactic acid (PLLA)/hydroxyapatite (HA) composite-based absorbable plates and screws. Clinical courses were confirmed and comparisons were conducted based on direct observation. Results: There were no naturally occurring foreign body reactions. Post-traumatic inflammatory responses occurred in eight patients (nine cases), in which six recovered naturally with conservative treatment. The absorbable plates were removed from two patients. PLA/PGA compositebased absorbable plates degraded into fragments with non-uniform, sharp surfaces whereas PLLA/HA composite-based absorbable plates degraded into a soft powder. Conclusion: PLA/PGA composite-based and PLLA/HA composite-based absorbable plates showed no naturally occurring foreign body reactions and showed different degradation patterns. The absorbable plate used for facial bone fracture surgery needs to be selected in consideration of its degradation patterns.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.432-439
• /
• 2009

This research project was carried out to develop the technique to assess quantitatively and rapidly the stability of a tunnel by using the measured displacement at the tunnel construction site under excavation. To achieve this purpose, a critical strain concept was introduced and applied to an assessment of a tunnel under construction. The new technique calculates numerically the strains of the surrounding ground by using the measured displacements during excavation. A numerical practical system was developed based on the proposed analysis technique in this study. The feasibility of the developed analysis module was verified by incorporating the analysis results obtained by commercial programs into the developed analysis module. To verify the feasibility of the developed analysis module, analysis results of models both elastic and elasto-plastic grounds were investigated for the circular tunnel design. Then the measured displacements obtained in the field are utilized practically to assess the safety of tunnels using critical strain concept. It was verified that stress conditions of in-situ ground and ground material properties were accurately assessed by inputting the calculated displacement obtained by commercial program into this module for the elastic ground. However for the elasto-plastic ground, analysis module can reproduce the initial conditions more closely for the soft rock ground than for the weathered soil ground. The stability of tunnels evaluated with two types of strains, that is, the strains obtained by dividing the crown displacement into a tunnel size and the strains obtained by using the analysis module. From this study, it is confirmed that the critical strain concept can be fully adopted within the engineering judgment in practical tunnel problems and the developed module can be used as a reasonable tool for the assessment of the tunnel stability in the field.

• Journal of Powder Materials
• /
• v.23 no.1
• /
• pp.26-32
• /
• 2016

Powder injection molding (PIM), which combines the advantages of powder metallurgy and plastic injection molding technologies, has become one of the most efficient methods for the net-shape production of both metal and ceramic components. In this work, plasma display panel glass bodies are prepared by the PIM process. After sintering, the hot isostatic pressing (HIP) process is adopted for improving the density and mechanical properties of the PIMed glass bodies. The mechanical and thermal behaviors of the prepared specimens are analyzed through bending tests and dilatometric analysis, respectively. After HIPing, the flexural strength of the prepared glass body reaches up to 92.17 MPa, which is 1.273 and 2.178 times that of the fused glass body and PIMed bodies, respectively. Moreover, a thermal expansion coefficient of $7.816{\times}10^{-6}/^{\circ}C$ is obtained, which coincides with that of the raw glass powder ($7.5-8.0{\times}10^{-6}/^{\circ}C$), indicating that the glass body is fully densified after the HIP process.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.15 no.4
• /
• pp.259-264
• /
• 1995

Several benefits provided by white clover (Tnifoliurn repens L.) can be elevated as relationship between its morphological and physiological characteristics is clarified. The experiment was done to analyze the relationship between them in the clover with different leaf size. Individual plants of Osceola (large leaf), Grasslands Huia (medium leaf) and Aberystwyth S184 (small leaf) were grown in 15m plastic pot containing a 1:2:1 soil:sand:Promix mixture for 55 days, and then clipped to remove all fully expanded leaves every 7, 14 or 28 days. To measure the cultivar response, plants were sampled for morphological and physiological parameters on the date (0) after final harvest and 1, 3, 7, 14 and 28 days after the final harvest and then their relationship was analyzed. Osceola had greater leaf area per trifoliolate but less no. of leaves per plant to result in similar total leaf area per plant of all cltivars. Stolon length and no. of growing tips per plant declined with smaller leaf size although the result in biomass was reverse. Stolon of all cultivars showed the greatest fluctuation in total nonstructud carbohydrate during the regrowing period but nitrogen concentrations of all their fractions and dinitrogen fixation did similar patterns. Stolon and root of Osceola, moreover, were the highest ones. Biomass, stolon length and total leaf area per plant of all cultivars were positively correlated to carbohydrate concentration of all frauions and dinitrogen fixation. In Osceola relationship between nitrogen concentration of stolon and the characters showed in Osceola was positively done.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.1
• /
• pp.89-95
• /
• 1989

In this study, it is attempted to examine (1) the residual deformation and elastic deformation induced from the repeated loads (up to the maximum of 100,000 times) on fully compacted soil specimen, the relation between stress and strain by performing the unconfined compressive test, after repeated loads and (2) the effect of water content, dry density, number of cycle, repeated loads, etc. on the effect of the stress-strain relation. The rate of deformation caused by repeated loads greatly depends on to the condition whether the water content is above or below the plastic limit. It is possible to estimate the initial tangent modulus of soil by means of modulus of elastic deformation obtained by putting repeated loads on the clay soil.

• Computers and Concrete
• /
• v.1 no.3
• /
• pp.261-284
• /
• 2004

Two enhancements to a recently developed plastic-damage-contact model for concrete are presented. The model itself, which uses planes of degradation that can undergo damage and separation but that can regain contact according to a contact law, is described. The first enhancement is a new damage evolution function which provides a completely smooth transition from the undamaged to the damaged state and from pre-peak to post-peak regions. The second is an improved contact function that governs the potential degree of contact with increasing opening on a crack plane. The use of a damage evolution function with a pre-peak has implications for the consistent tangent matrix/stress recovery algorithm developed for the model implementation, and amendments to this algorithm to accommodate the new function are described. A series of unpublished experimental tests on notched specimens undertaken in Cardiff in the mid 1990s are then described. These include notched beam tests as well as prismatic and cylindrical torsion tests. The tests are then considered in three dimensional finite element analyses using the modified Craft model implemented in the finite element program LUSAS. Comparisons between experimental and numerical data show reasonable agreement except that the numerical simulations do not fully describe the latter stages of the softening responses for the torsion examples. Finally, it is concluded that the torsion tests described provide useful benchmark examples for the validation of three-dimensional numerical models for concrete.