• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.1
• /
• pp.225-234
• /
• 2019

By using the Triboelectric nanogenerators, known as TENG, we can take advantages of high conversion efficiency and continuous power output even with small vibrating energy sources. Nonlinear energy extraction techniques for Triboelectric vibration energy harvesting usually requires synchronized active electronic switches in most electronic interface circuits. This study presents a nonlinear energy harvesting with high energy conversion efficiency to harvest and save energies from human active motions. Moreover, the proposed design can harvest and store energy from sway motions around different directions on a horizontal plane efficiently. Finally, we conducted a comparative analysis of a multi-mode energy storage board developed by a silicon-based piezoelectricity and a transparent TENG cell. As a result, the experiment showed power generation of about 49.2mW/count from theses multi-fully harvesting source with provision of stable energy storages.

• Journal of the Korean Ceramic Society
• /
• v.56 no.1
• /
• pp.71-76
• /
• 2019

Monochromatic amber phosphor in glasses (PiGs) for automotive LED applications were fabricated with $YAG:Ce^{3+}$, $CaAlSiN_3:Eu^{2+}$ phosphors and Pb-free silicate glass. After synthesis and thickness-thinning process, PiGs were mounted on high-power blue LED to make monochromatic amber LEDs. PiGs were simple mixtures of 566 nm yellow YAG, 615 nm red $CaAlSiN_3:Eu^{2+}$ phosphor and transparent glass frit. The powders were uniaxially pressed and treated again through CIP (cold isostatic pressing) at 200 MPa for 20 min to increase packing density. After conventional thermal treatment at $550^{\circ}C$ for 30 min, PiGs were applied by using GPS (gas pressure sintering) to obtain a fully dense PiG plate. As the phosphor content increased, the density of the sintered body decreased and PiGs containing 30 wt% phosphor had full sintered density. Changes in photoluminescence spectra and color coordination were investigated by varying the ratio of $YAG/CaAlSiN_3$ and the thickness of the plates. Considering the optical spectrum and color coordinates, PiG plates with $240{\mu}m$ thickness showed a color purity of 98% and a wavelength of about 605 nm. Plates exhibit suitable optical characteristics as amber light-converting material for automotive LED applications.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.286-286
• /
• 2016

Hexagonal boron nitride (hBN) is a dielectric insulator with a two-dimensional (2D) layered structure. It is an appealing substrate dielectric for many applications due to its favorable properties, such as a wide band gap energy, chemical inertness and high thermal conductivity[1]. Furthermore, its remarkable mechanical strength renders few-layered hBN a flexible and transparent substrate, ideal for next-generation electronics and optoelectronics in applications. However, the difficulty of preparing high quality large-area hBN films has hindered their widespread use. Generally, large-area hBN layers prepared by chemical vapor deposition (CVD) usually exhibit polycrystalline structures with a typical average grain size of several microns. It has been reported that grain boundaries or dislocations in hBN can degrade its electronic or mechanical properties. Accordingly, large-area single crystalline hBN layers are desired to fully realize the potential advantages of hBN in device applications. In this presentation, we report the growth and transfer of centimeter-sized, nearly single crystal hexagonal boron nitride (hBN) few-layer films using Ni(111) single crystal substrates. The hBN films were grown on Ni(111) substrates using atmospheric pressure chemical vapor deposition (APCVD). The grown films were transferred to arbitrary substrates via an electrochemical delamination technique, and remaining Ni(111) substrates were repeatedly re-used. The crystallinity of the grown films from the atomic to centimeter scale was confirmed based on transmission electron microscopy (TEM) and reflection high energy electron diffraction (RHEED). Careful study of the growth parameters was also carried out. Moreover, various characterizations confirmed that the grown films exhibited typical characteristics of hexagonal boron nitride layers over the entire area. Our results suggest that hBN can be widely used in various applications where large-area, high quality, and single crystalline 2D insulating layers are required.

• KIEAE Journal
• /
• v.17 no.1
• /
• pp.69-75
• /
• 2017

Purpose: Heat transfer analysis of recently developed 'slim type double-skin system window' were presented. This window system is designed for curtain wall type façade that main energy loss factor of recent elegant buildings. And the double skin system is the dual window system integrated with inner shading component, enclosed gap space made by two windows when both windows were closed and shading component effectively reflect and terminate solar radiation from outdoor. Usually double-skin system requires much more space than normal window systems but this development has limited by 270mm, facilitated for curtain wall façade buildings. In this study, we estimated thermophysical phenomena of our double-skin curtain wall system window with solar load conditions at the summer season. Method: A fully 3-Dimentional analysis adopted for flow and convective and radiative heat transfer. The commercial CFD package were used to model the surface to surface radiation for opaque solid region of windows' frame, transparent glass, fluid region at inside of double-skin and indoor/outdoor environments. Result: Steep angle of solar incident occur at solar summer conditions. And this steep solar ray cause direct heat absorption from outside of frame surface rather than transmitted through the glass. Moreover, reflection effect of shading unit inside at the double-skin window system was nearly disappeared because of solar incident angle. With this circumstances, double-skin window system effectively cuts the heat transfer from outdoor to indoor due to separation of air space between outdoor and indoor with inner space of double-skin window system.

• Journal of the Korean Chemical Society
• /
• v.66 no.3
• /
• pp.209-217
• /
• 2022

We have developed photosensitive electrochromic smart windows that does not require any transparent conducting oxide (TCO) substrate. In our previous study, we demonstrated that a flexible film-type device made with a low temperature curing WO₃ sol and TiO₂ sol could show a reversible and rapid switching between colored and bleached state via incorporation of platinum catalysts on the surface of WO₃ layer. However, when these devices were exposed to sunlight over 4 hour, it was confirmed that they did not return to fully bleached state in the darkened state due to their overcoloring process. In this study, we added 4-hydroxy-(2,2,6,6-tetramethylpiperidin-1-yl)oxyl (TEMPOL) as an additive to the electrolyte of photosensitive electrochromic device to effectively prevent the undesired overcoloring process. The resulting device with TEMPOL indeed did not undergo excessive coloration and showed great reversibility even after being exposed to sunlight for over 4 hours. Various concentrations of TEMPOL were applied to compare changes in the visible transmittance and coloring/bleaching kinetics of devices. In terms of energetic point of view, we proposed a plausible mechanism of TEMPOL to prevent excessive coloration.

• Health Policy and Management
• /
• v.34 no.3
• /
• pp.223-225
• /
• 2024

It has been 7 months since medical students boycotted classes and resident doctors left hospitals in protest against the government's policy to increase the number of doctors. As education was suspended and services at university hospitals reduced, medical gaps in medical care have emerged. As a result, concerns are growing about a potential crisis in the healthcare system. The reason for the doctors' strong opposition to the policy lies in several issues that need improvement in the government's decision-making process. By reviewing these issues, we look forward to drawing lessons for making better policy decisions in the future. First, because the evidence supporting policy decisions has various characteristics and scopes, it is important to thoroughly discuss these grounds with stakeholders. Second, the discussion structure for reviewing evidence and making decisions should consist of members capable of fully negotiating diverse perspectives and should be operated through a fair and transparent process. If these steps are not properly implemented, conflicts surrounding the evidence could escalate, thereby lowering trust in the government. When stakeholders lose trust in the government, the social costs of implementing policies may rise, and policy efficiency may decline. Therefore, it is time to restructure the decision-making system in the direction of reducing potential conflicts that may arise during the future policy implementation process and increasing trust in the government.

• Korean Security Journal
• /
• no.30
• /
• pp.85-115
• /
• 2012

The private security industry has expanded in proportion to economic developments throughout the world, largely because the existing security services provided by the government do not satisfy demands of various economic entities and people in the society for better security service. Therefore, it would not be unfair to say that security services by private sectors are decided by its quality, price, and customers' needs. A refined management system, however, is essential to assess qualification of security companies and their service quality, given the nature of public goods of security service. Despite the steady growth of private security industry in Korea, however, it has been continuously criticized that its security management system for better qualification of security guards, training, and private security companies have not been fully updated enough to guarantee good quality. This paper aims to gain insights to effective policy formation in the Korean private security industry, through reviewing the licensing system of private security guards and the Approved Contractor Scheme (hereinafter the ACS) in the UK- that has on one hand systematically regulated private security industry, but on other hand has enforced public-private cooperation by laying significant stress on autonomy of private security companies. The distinctive characteristic of the UK policy for the private security is that the Security Industry Authority (hereinafter the SIA), an independent authority, is leading development of the private security industry of the UK through specialized private security regulation and enhanced service quality. In addition, the UK is developing quality of security service with transparent financial management and recruitment of good quality security guards by adopting not only substantially specified regulations and standards, but the voluntary ACS system. Moreover, the SIA analyzes customers' demands for security service specializing the policy for private security through conducting a variety of surveys. With the analysis of the UK private security system, this paper suggests that the Korean government change from a non-specialized private security regulation system by the National Police Agency to an independently specialized private security authority like the SIA and adopt the compulsory licensing and the ACS system of the UK.