• 제목/요약/키워드: Full-scale testing

검색결과 230건 처리시간 0.026초

산처리(酸處理)된 Enamel표면(表面)에 대(對)한 Composite resin의 인장접착강도(引張接着强度)에 관(關)한 연구(硏究) (STUDY OF THE TENSILE BOND STRENGTH OF COMPOSITES RESINS APPLIED TO ACID-ECHED ENAMEL)

  • 이영근;민병순;최호영;박상진
    • Restorative Dentistry and Endodontics
    • /
    • 제12권2호
    • /
    • pp.45-53
    • /
    • 1987
  • The purpose of this study was to evaluate the tensile bond strength between composite resin and the human enamel. Three composite resin systems, two chemical (Clearfil Posterior, and Clearfil Posterior-3) and one light cure (Photo Clearfil-A), used with and without an intermediate resin (clearfil bonding agent), were evaluated under different amounts of load (10g, 200g and 200g for a moment) for in vitro tensile bond strength to acid-eched human enamel. Clinically intact buccal or lingual surfaces of 144 freshly extracted human permanent molars, embedded in acrylic were flattened with No #600 carborundum discs. Samples were randomly assigned to the different materials and treatments using a table of random numbers. Eight samples were thus prepared for each group(Table 2) these surfaces were etched with an acid etchant (Kurarey Co. Japan) in a mode of etching for 30 seconds, washing for 15 seconds, and drying for 30-seconds. During the polymerization of composite resin on the acid-etched enamel surfaces with and without bonding agent 10-gram, 200 gram and temporary 200 gram of load were applied. The specimens were stored in 50% relation humidity at $37^{\circ}C$ for 24 hours before testing. An universal Testing machine (Intesco model No. 2010, Tokyo, Japan) was used to apply tensile loads in the vertical directed (fig 5), and the force required for separation was recorded with a cross head speed of 0.25 mm/min and 20 kg in full scale. The results were as follow: 1. The tensile bond strength was much greater in applying a bonding agent than in not doing that. 2. The tensile bond strength of chemical cure composite resin was higher than that of light cure composite resin with applying on bonding agent on the acid-etched enamel. 3. In case of not applying a bonding agents on the acid-etching enamel, the highest tensile bond strength under 200 gram of load was measured in light cure composite resin. 4. The tensile bond strength under 200-gram of load has no relation with applying the bonding agent. 5. Under the load of 10-gram, There was significant difference in tensile bond strength as applying the bonding agent.

  • PDF

폭식증 환자의 연극치료 사례 (Case study of dramatherapy for a bulmina nervosa patient)

  • 이효원
    • 한국연극학
    • /
    • 제52호
    • /
    • pp.359-397
    • /
    • 2014
  • This paper describes dramatherapy with a bulmina nervosa patient. She was in her early 20s and has been under the various psychotherapies for cure of deep depression since 2005. We had 24 sessions and 3 persons - the patient, the therapist, and the assist-therapist- participated in dramatherapy. I found there's a big collision between her important roles in the course of initial interview and diagnosis. Those roles are 'a good daughter of mom' and 'an independent adult'. Therefore I defined her bulmina nervosa as 'an symbolic behavior repeats compulsively the failure of separation from her mother.' And I set the general goals, the separation from her mother, the awareness and expression of negative emotions, and the diminuation of overeating and vomiting. To attain these object, we had many different dramatic experiences in dramatherapy. We made a self-portrait, the mask of bulmina nervosa, family sculpture, figure work, the past I and the present I, psychodramatic scene and several stories. In order to objective assessment, I used behavioral observation and 6PSM(6 Pieces Story Making) analysis. First of all the most noticeable change was a rapid decrease in over-eating and vomiting. Before the dramatherapy she had overeaten 30 times per week. At the closure it has fallen off to 1 time per week. Another behavioral changes were shift of outward appearance, not going church, working for living, and having a date with only one. She made 3 stories on 1th session, 13th session, and 23th session. And I comparatively analysed those stories with both qualitative and quantitative method. For qualitative analysis, I classified 5 structures according to the substantial similrarity. On protagonist structure, there's no difference. Three protagonists are dead things. The type of task structure is changed from an escape, a traveling, to metamorphosis. The type of obstruction structure is changed from the protagonist to an outside object. The type of closure structure is changed from an exaggerated happy ending, sad ending to probable happy ending. To quantitify the aspects of transformation, I developed an assesment tool using likert scale. It is composed of 4 sub-categories-reality testing, imagination, ego-strength, optimism problem-solving. In reality testing category, a shift of score was 9-11-15, imagination 2-5-5, ego strength 3-2-2, optimism 6-3-7, and total score 20-21-29. This change of score reflects the growth of problem solving capacity. Viewed in this light, dramatherapy with this girl was successful on the whole. The thing had significant effect on it was psycho-dynamic approach focused on separation from her mother and defence mechanism to avoid negative emotion. And assessment method used in this case will be full of suggestions to researches to come.

다단계 긴장 PSC 거더 철도교량의 동특성 실험 및 주행열차하중 해석에 의한 동적성능 평가 (Dynamic Performance Estimation of the Incrementally PSC Girder Railway Bridge by Modal Tests and Moving Load Analysis)

  • 김성일;김남식;이희업
    • 대한토목학회논문집
    • /
    • 제26권4A호
    • /
    • pp.707-717
    • /
    • 2006
  • 근래에 들어 기존의 PSC 거더 교량 외에 다양한 형태의 교량이 개발되고 있으며, 다단계 긴장에 의한 PSC 거더교는 대표적인 예이다. 다단계 긴장 PSC 거더교는 구조적 개념에 따라 자중을 줄이고 경간을 장대화할 수 있는 장점을 갖고 있다. 그러나, 이와 같은 장대화된 보다 유연한 교량은 구조적 안전성 및 사용성을 고려한 주행열차하중에 대한 동적거동 검토가 필수적이며, 철도교량의 주행열차하중에 대한 동적성능평가를 위한 정확한 동특성 입력은 매우 중요하다. 본 연구에서는 정확한 고유진동수 및 감쇠비 추출을 위하여 25m 실물 다단계 긴장 PSC 거더를 제작하여 시공단계별 모달테스트를 수행하였다. 모달테스트를 위한 가진방법으로 기존의 충격햄머에 의한 방법 외에 디지털 콘트롤에 의한 가진기를 사용하여 보다 정확한 주파수응답 함수를 얻고자 하였다. 또한, 시공단계별 구조계 변화 및 긴장에 의한 동특성 변화를 고찰하기 위하여 시공단계별 실험을 수행하였다. 모달테스트 결과에 의한 동특성 값을 주행열차하중 해석에 적용하여 다양한 매개변수연구를 통한 철도교량 동적성능평가를 수행하였다. 동적처짐, 충격계수, 바닥판의 연직가속도, 단부꺾임각 등에 대하여 열차별, 속도별 동적해석을 수행하여 국내외 철도교량 동적성능 평가기준과 비교하였다.

선망어법의 어획과정에 있어서 어군행동에 관한 연구 (A Study on the Behaviour of Fish Schools in the Process of Catch of the Purse Seine Fishing Method)

  • 박정식;김석종;김삼곤
    • 수산해양기술연구
    • /
    • 제33권3호
    • /
    • pp.173-182
    • /
    • 1997
  • 선망어법의 어회과정에 있어서 어군행동에 관한 기초적인 연구를 목적으로 제주 근해에서 사용하고 있는 고등어 선망어구인 파워불록용 선망(Powetblock seine)과 앞으로 예상되는 단선조작에서의고등어 선망어구인 트리플레스용 선망(Triplex seine)의 두 가지 모형망을 1/180로 제작 하고 선망에 의해 포위된 어군의 망내행동과 양쪽 선단의 개구부를 통하여 도피하는 어군의 행동을 관찰 분석함과 동시에 망단의 개구부의 면적 및 장력변화 등을 해석하였으며, 그 결과는 다음과 같다. 1. 죔줄죄기 소요시간 20분일 때, 개구부로 도피하는 아군의 평균 유영속도는 Powerblcok seine에서 9.71cm/sec, Triplex seine에서 9.97cm/sec였다. 2.죔줄죄기 소요시간 20분중 좀줄을 50% 정도 감아들었을 때, 선망내의 어군은 Powerblock seine의 경우 I section 10%, II section방향으로 10% 유영하는 행동을 보였다. 3.죔줄죄기 소요시간 20분중 10분 경과했을 때, 전면 망단 개구부의 면적 감소율은 Powerblock seine이 63.5%, Triplex seine이 어군도피에 대한 수평적 서단능력이 높았따. 그리고, 좀줄에 걸리는 최대장력은 Powerblock seine이 약 8.1톤, Triplex seine이 8.3톤으로 나타 났는데, 양자의 차이는 그다지 크지 않았다.

  • PDF

글래스 아이오노머 이장재와 복합레진간의 결합강도에 관한 연구 (A STUDY ON THE BOND STRENGTHS BETWEEN GLASS IONOMER CEMENT BASES AND COMPOSITE RESINS)

  • 김민희;김신;정태성
    • 대한소아치과학회지
    • /
    • 제26권3호
    • /
    • pp.520-527
    • /
    • 1999
  • 본 연구는 현재 널리 쓰이고 있는 sandwich technique을 임상에 적용함에 있어서, GIC 이장재에 대한 이중중합형 레진과 비교적 근래에 소개된 compomer의 결합력을 측정하여 기존의 광중합형, 화학중합형 복합레진과 비교하고, 가장 우수한 결합력을 보이는 glass ionomer-composite resin의 조합을 밝혀내고자 시도되었다. 이장용 재료로는, 광중합형 GIC인 Vitrebond와 화학중합형 GIC인 Ketac-fil을 사용하였으며, 이 두 가지의 이장재에 대해, 광중합형 복합 레진인 Z-100, 화학중합형 복합 레진인 Clearfil, compomer인 Dyract, 그리고 이중중합형 복합 레진인 Bis-core를 축조하여 각 군당 10개씩, 총 80개의 시편을 제작하였다. 제작된 시편은 $37^{\circ}C$의 증류수에 24시간동안 보관한 후, full load scale 50kg, cross-head speed 1mm/min 조건의 만능 시험기에서 그 전단결합강도를 측정하였으며 실험결과는 student t-test로 검정하였다. 본 연구의 결과는 다음과 같다. 1. Vitrebond를 이장재로 사용한 경우, Z-100이 가장 낮은 결합강도를 보였으며, 나머지 세 재료는 결합력의 차이를 보이지 않았다(P>0.05). 2. Ketac-fil을 이장재로 사용한 경우, Clearfil이 가장 높은 결합강도를 보였고, Dyract, Bis-core가 중등도의 결합강도를, Z-100이 가장 낮은 결합강도를 보였다(P<0.05). 3. Clearfil은 Vitrebond 상방에서는 타 재료들과 비슷한 결합강도를 보였으나, Ketac-fil 상방에서는 가장 강한 결합강도를 보임으로써, GIC 이장재의 종류에 따른 결합력의 차이를 보였으나 (P<0.05), 나머지 세 재료의 경우에는 차이를 보이지 않았다(P>0.05). 4. Vitrebond를 사용할 때보다 Ketac-fil을 이장재로 사용할 때, 상부에 축조되는 복합레진의 종류에 따른 결합력의 차이가 더 크게 나타났다(P<0.05).

  • PDF

국부좌굴을 고려한 고강도 조립 H형강 부재의 휨성능 실험 (Flexural Test of H-Shape Members Fabricated of High-Strength Steel with Considering Local Buckling)

  • 이철호;한규홍;박창희;김진호;이승은;하태휴
    • 한국강구조학회 논문집
    • /
    • 제23권4호
    • /
    • pp.417-428
    • /
    • 2011
  • 강구조 설계는 재료의 비탄성 변형능력을 활용하는 정도에 따라 탄성설계법, 소성설계법, 내진설계법으로 대별할 수 있다. 현재 국내외 강구조 설계기준에서는 항복강도 450MPa를 초과하는 고강도강재에 대해서는 비탄성 변형능력에 대한 우려와 국부좌굴 및 횡좌굴 거동에 대한 실험자료의 부족으로 소성설계의 적용을 금하고 있다. 본 연구에서는 일반강재를 대상으로 개발된 현행 강구조설계기준의 플랜지 판폭두께비 제한식을 최근에 개발된 고강도강재인 HSB800에도 그대로 확대 적용할 수 있는지 여부를 확인하고 고강도강 휨부재의 국부좌굴 및 비탄성거동을 파악하기 위한 실물대실험을 수행하였다. HSB800 및 SM490A(비교강종) 강재로 조립된 H형강 휨부재를 각각 5개씩 총 10개의 실험체를 제작하고 실험하여 비교분석하였다. 모든 SM490A 비교실험체는 설계기준 상의 판폭두께비에 따른 요구강도와 연성능력을 충분히 발휘하였다. HSB800 실험체 역시 강도 발현의 측면에서는 매우 만족스런 성능을 발휘하였다. 즉, 비콤팩트 및 세장판 요소 플랜지를 지닌 실험체에서도 소성모멘트를 충분히 상회하거나 이에 육박하는 강도가 발현되었다. 이는 현행 판폭두께비 제한규정을 HSB800 고강도강에 그대로 적용해도 강성과 강도 확보를 목표로 하는 모든 탄성설계에 충분히 보수적으로 적용할 수 있음을 의미한다. 그러나 SM490 실험체와는 달리 HSB800 실험체 5개 가운데 3개가 가력점 스티프너와 접합된 하부플랜지에서 조기 인장파단이 발생하여 소성설계에 요구되는 회전능력 R=3에는 미달하였다. HSB800 실험체에서 관측된 파단원인을 규명하고 고강도강재에 보다 적합한 판폭두께비의 정립을 위한 추가실험과 해석적 연구가 필요할 것으로 판단된다.

보다 정확한 동적 상황인식 추천을 위해 정확 및 오류 패턴을 활용하여 순차적 매칭 성능이 개선된 상황 예측 방법 (Context Prediction Using Right and Wrong Patterns to Improve Sequential Matching Performance for More Accurate Dynamic Context-Aware Recommendation)

  • 권오병
    • Asia pacific journal of information systems
    • /
    • 제19권3호
    • /
    • pp.51-67
    • /
    • 2009
  • Developing an agile recommender system for nomadic users has been regarded as a promising application in mobile and ubiquitous settings. To increase the quality of personalized recommendation in terms of accuracy and elapsed time, estimating future context of the user in a correct way is highly crucial. Traditionally, time series analysis and Makovian process have been adopted for such forecasting. However, these methods are not adequate in predicting context data, only because most of context data are represented as nominal scale. To resolve these limitations, the alignment-prediction algorithm has been suggested for context prediction, especially for future context from the low-level context. Recently, an ontological approach has been proposed for guided context prediction without context history. However, due to variety of context information, acquiring sufficient context prediction knowledge a priori is not easy in most of service domains. Hence, the purpose of this paper is to propose a novel context prediction methodology, which does not require a priori knowledge, and to increase accuracy and decrease elapsed time for service response. To do so, we have newly developed pattern-based context prediction approach. First of ail, a set of individual rules is derived from each context attribute using context history. Then a pattern consisted of results from reasoning individual rules, is developed for pattern learning. If at least one context property matches, say R, then regard the pattern as right. If the pattern is new, add right pattern, set the value of mismatched properties = 0, freq = 1 and w(R, 1). Otherwise, increase the frequency of the matched right pattern by 1 and then set w(R,freq). After finishing training, if the frequency is greater than a threshold value, then save the right pattern in knowledge base. On the other hand, if at least one context property matches, say W, then regard the pattern as wrong. If the pattern is new, modify the result into wrong answer, add right pattern, and set frequency to 1 and w(W, 1). Or, increase the matched wrong pattern's frequency by 1 and then set w(W, freq). After finishing training, if the frequency value is greater than a threshold level, then save the wrong pattern on the knowledge basis. Then, context prediction is performed with combinatorial rules as follows: first, identify current context. Second, find matched patterns from right patterns. If there is no pattern matched, then find a matching pattern from wrong patterns. If a matching pattern is not found, then choose one context property whose predictability is higher than that of any other properties. To show the feasibility of the methodology proposed in this paper, we collected actual context history from the travelers who had visited the largest amusement park in Korea. As a result, 400 context records were collected in 2009. Then we randomly selected 70% of the records as training data. The rest were selected as testing data. To examine the performance of the methodology, prediction accuracy and elapsed time were chosen as measures. We compared the performance with case-based reasoning and voting methods. Through a simulation test, we conclude that our methodology is clearly better than CBR and voting methods in terms of accuracy and elapsed time. This shows that the methodology is relatively valid and scalable. As a second round of the experiment, we compared a full model to a partial model. A full model indicates that right and wrong patterns are used for reasoning the future context. On the other hand, a partial model means that the reasoning is performed only with right patterns, which is generally adopted in the legacy alignment-prediction method. It turned out that a full model is better than a partial model in terms of the accuracy while partial model is better when considering elapsed time. As a last experiment, we took into our consideration potential privacy problems that might arise among the users. To mediate such concern, we excluded such context properties as date of tour and user profiles such as gender and age. The outcome shows that preserving privacy is endurable. Contributions of this paper are as follows: First, academically, we have improved sequential matching methods to predict accuracy and service time by considering individual rules of each context property and learning from wrong patterns. Second, the proposed method is found to be quite effective for privacy preserving applications, which are frequently required by B2C context-aware services; the privacy preserving system applying the proposed method successfully can also decrease elapsed time. Hence, the method is very practical in establishing privacy preserving context-aware services. Our future research issues taking into account some limitations in this paper can be summarized as follows. First, user acceptance or usability will be tested with actual users in order to prove the value of the prototype system. Second, we will apply the proposed method to more general application domains as this paper focused on tourism in amusement park.

철골모멘트 용접접합부의 내진성능에 미치는 합성슬래브의 영향 (Effects of Composite Floor Slab on Seismic Performance of Welded Steel Moment Connections)

  • 이철호;정종현;김정재
    • 한국강구조학회 논문집
    • /
    • 제26권5호
    • /
    • pp.385-396
    • /
    • 2014
  • 1994년 미국 노스리지 지진 당시 상당 부분의 피해가 보 하부 플랜지에서 발생하였는데, 이의 원인으로 여러 가지가 거론되었지만 바닥슬래브와 합성작용에 의한 중립축 상승이 주요한 역학적 원인으로 인정되고 있다. 국내의 경우 지진에 저항하는 모멘트골조에 속하는 보(moment frame beam)의 경우에 순철골보로서 설계하고도 실제 시공시에는 보 상부 플랜지에 전단스터드를 필요 이상으로 과도하게 배치하는 오랜 관행이 존재하고 있어 내진성능 확보 차원에서 문제를 유발할 소지가 있다. 본 논문에서는 의도하지 않은 또는 과도한 합성작용이 내진성능에 미치는 부작용을 실물대 실험을 통해 재현하고 이의 개선방향을 모색하고자 하였다. 국내 관행에 따른 접합상세와 합성바닥구조를 갖는 실험체(PN700-C)의 경우, 합성도가 23% 정도임에도 불구하고, 상부플랜지 압축응력에 대해 중립축이 현저히 상승하였고 결국 3% 층간변위에서 콘크리트 압괴를 수반하면서 하부플랜지 취성파단이 발생하였다. 반면 합성바닥이 포함되어 있으나 합성작용이 최소화되도록 설계된 RBS접합부실험체(DB700-C)는 순철골(비합성) RBS접합부실험체(DB700-NC)와 유사한 이력거동을 보이면서 어떤 취성파괴도 없이 5% 수준의 뛰어난 층간변형 능력을 발휘하였다. 본 연구결과는 강구조접합부의 내진보강이나 신축에 있어 모멘트골조에 속한 철골보 및 접합부는 바닥구조와의 합성작용이 최소화되도록 설계 및 시공되어야 함을 시사한다.

차양식 방화루버의 화염 및 온도 전파 억제 특성 (The Flame and Distributed Temperature Restraint Properties of Fire Venetian Blind Louver in Buildings)

  • 채영석
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제19권1호
    • /
    • pp.120-127
    • /
    • 2015
  • 이 연구는 화재시 수직화염을 적절하게 제어할 수 있는 차양식 방화루버의 실용화 및 설계기법 개발에 관한 일련의 연구로써 구조물에서 화염 억제 특성을 해석할 수 있는 기법을 제시하고 실험을 통해 해석기법의 검증과 차양식 방화루버의 성능을 검증하기 위한 것이다. 실제 방화루버의 수직화염 억제뿐만 아니라 열전달 특성을 정량적으로 분석하기 위하여 2개의 실대형 실험을 계획하였다. 실험체는 전체 $3m{\times}3m$의 시험체 중 $850mm{\times}1,800mm$의 개구부를 두고 상부에 실험용 방화루버 ($900mm{\times}900mm{\times}175mm$)를 설치하였으며, 건설기술연구원에서 ISO834 화재하중 규모로 1시간 실험을 실시하였다. 실험변수는 방화루버의 두께로 1.5mm, 2.0mm로 설정하였다. 실험결과 차양용 방화루버는 상부의 수열온도가 현저하게 감소하는 것을 확인하였다. 특히 화재하중 가력 초기에서 6분 (로내 온도 $600^{\circ}C$)에서 우수한 차열성능을 나타냈다. ISO 834 화재하중 60분에서 방화루버 상부 500mm, 800mm 위치의 수열온도는 루버 두께에 상관 없이 각각 로내 온도 대비 11, 10%로 나타났다. 이를 통해 화재발생 후 상부층으로 화염 전파 억제 및 온도 전달 제어 측면에서 차양용 방화루버는 유효한 방안 중 하나라는 것을 알 수 있었다.

600MPa급(SM 570 TMC) 고성능강 기둥-보 용접접합부의 탄소성 거동에 관한 연구 (A Study on Elasto-Plastic Behavior of Column-to-Beam Welded Connection with 600MPa Class High Performance Steel)

  • 김종락;오영석;백기열;장성연
    • 한국강구조학회 논문집
    • /
    • 제20권6호
    • /
    • pp.783-792
    • /
    • 2008
  • 최근 초고층 건축물의 수요에 대응하여 고성능 고강도 강재에 대한 수요가 급증하고 있으며 고층건축물에 대한 지진 피해에 대한 인식이 확산되면서 건축구조용강에 대한 요구 성능이 점차 증가하는 추세이다. 이러한 수요에 의해 600MPa 급 강재가 출현 되었으며 현재 강교량 및 초고층 건축물에 적용하려고 많은 연구가 이루어지고 있다. 새로운 강재를 적용한 골조의 수평력에 대한 거동은 자료가 부족한 실정이다. 특히 인성에 관해서는 일반구조용 강재를 적용한 기둥 보 접합부의 소성변형율과 비교하여 고강도강을 적용한 기둥보 접합부의 소성변형율 관련 설계자료가 절실히 필요하다. 따라서 본 연구에서는 600MPa급(SM570 TMC) 강재를 적용한 기둥-보 접합부의 초기연구로서 논스캘럽과 추천형스 캘럽 상세의 실구조물 규모의 기둥-보 용접접합부 실험체를 제작, 내진성능실험을 통해 구조성능을 평가하였다. 기존의 일반구조용 SM490 강재를 적용한 기존의 연구와 비교 분석하여 초고층 건축물에 적용을 위한 내진설계자료 및 제작상의 주의사항을 제시하였다.