• Journal of Electrical Engineering and Technology
• /
• 제10권1호
• /
• pp.109-117
• /
• 2015

This paper proposes the comparison results of various optimal power flow algorithms (OPF) to calculate the locational marginal prices (LMP) of the unreduced full scale Korean transmission system. Five different types of optimal power flow models are employed: Full AC OPF, Cubic AC OPF, Quadratic AC OPF, Linear AC OPF and DC OPF. As the results, full AC OPF and cubic AC OPF model provides LMP calculation results very similar to each other while the calculation time of cubic AC OPF model is faster than that of the Full AC OPF. Other simplified OPF models, quadratic AC OPF, linear AC OPF and DC OPF offer erroneous results even though the calculation times are much faster than the Full AC OPF and the Cubic AC OPF. Given the condition that the OPF models sometimes fail to find the optimal solution due to the severe complexity of the Korean transmission power system, the Full AC OPF should be used as the primary OPF model while the Cubic AC OPF can be a promising backup OPF model for the LMP calculations and/or real-time operation.

• 한국물환경학회지
• /
• 제22권6호
• /
• pp.1101-1106
• /
• 2006

생물학적 영양소 제거공정의 하수처리장에서 운전온도가 낮은 겨울철 기간중 사상성 미생물에 의한 Bulking 문제가 발생하고 있다. 본 연구는 사상성 세균의 한 종류인 M. parvicella의 성장에 의한 Bulking 문제를 C시 하수처리장과 파일럿 시설을 이용하여 검토하였다. Full-scale 시설은 1일 처리용량이 $51,000m^3/d$이고 F/M비는 0.12 kgBOD/kgMLVSS/d이며 SRT는 25일 이상으로 운전되고 있었다. 본 시설은 2003년 생물학적 영양소 제거공정으로 전환된 이후 운전온도가 $15^{\circ}C$ 이하의 저온으로 운전될 때 Bulking과 그로 인해 반응조내 거품현상이 주기적으로 발생되어 왔다. 파일럿 플랜트는 Full-scale과 동일한 시스템 및 폐수를 이용하였으며 1일 처리용량은 3.8 톤이고 운전온도는 $10^{\circ}C$에서 $25^{\circ}C$이었으며 SRT는 10일에서 25일 사이로 운전되었다. Full-scale에서는 온도변화에 따른 M. parvicella 성장과 SVI 변화 양상이 검토되었다. 아울러 파일럿 시설에서는 DO와 SRT를 변화시키면서 그에 따른 Bulking 미생물의 성장과 SVI 변화 형태를 분석하였다. 3년간 Full-scale의 운전결과를 분석한 결과 여름철 기간은 SVI가 160 이하의 양호한 분포를 나타내는 가운데 M. parvicella에 의해 더 이상 침전효율이 저조한 결과를 나타내지 않고 있었다. 반면 낮은 운전온도에서는 SVI가 300 이상의 높은 값을 나타내었다. 본 연구결과 DO 농도를 2-4 mg/L로 운전하거나 SRT를 20일 이내로 유지하였을 경우 M. parvicella에 의한 Bulking 문제가 효과적으로 제어되었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1905-1913
• /
• 2011

The dynamic characteristic of bogie that is driving system of railway vehicle is very important regarding decision of vehicle characteristics as running safety and comport. The dynamic characteristic test of bogie is tested on full size in place on field testing on track. But, the testing on the full size caused many problems. To overcome these problem by full size test, the Railway Safety Research Center in Seoul National University of Science & Technology developed 1/5 scale size of small scale derailment simulator and is currently testing running stability of 1/5 scaled bogie. Also To take effectively advantage of running stability test using small scale derailment simulator in actuality design and reliability estimation, it is necessary comparison and examination with field test and theoretical analysis result In this paper. to achieve running stability analysis of 1/5 scaled bogie on small scale derailment. the program using MATLAB that is fast compose and analysis the motion equation of Saemaul power bogie is developed. It is achieved analysis according to various specification (weight, size, suspension, etc..) and is evaluated corelation between test result and dynamic characteristic of actual railway vehicle.

• Child Health Nursing Research
• /
• 제13권4호
• /
• pp.436-443
• /
• 2007

Purpose: An exploratory study was done to examine the validity of the new Ballard scale with extended scoring system(eNBS) in estimating gestational age(AG) in full-term newborns. Method: The eNBS scoring system was extended to include all numbers of total score of NBS and GA to allow a 3-days variation in GA estimatio compared to the original scale which has a 2-week variation due to the application of a 5-score interval for the total NBS score and only even numbers for GA. GA by eNBS(GA-eNBS) was compared with GA by LMP(GA-LMP) and GA by standard NBS(GA-sNBS) in 133 full-term newborns. Difference between GA-LMP and GA-eNBS was analyzed for each GA. Results: Positive correlations were observed in GA-sNBS and GA-eNBS with GA-LMP. There was no difference between GA-LMP and GA-eNBS at 39GA and 40GA. At 37GA and 38GA, GA-eNBS overestimated GA-LMP up to 1 week, while underestimating up to 1 week at 41GA. Conclusions: The accuracy of eNBS was validated within 3 days of variation in GA estimation at 39-40GA. Overestimation by eNBS suggests the possible acceleration of fetal maturity in premature newborns, while underestimation, of the deceleration of fetal maturity in postterm newborns.

• Nuclear Engineering and Technology
• /
• 제56권3호
• /
• pp.980-992
• /
• 2024

Steam line break accident (SLB) in the nuclear reactor is one of the representative Non-LOCA accidents in which thermal-hydraulics and neutron kinetics are strongly coupled each other. Thus, the multi-scale and multi-physics approach is applied in this study in order to examine a realistic safety margin. An entire reactor coolant system is modelled by system scale node, whereas sub-channel scale resolution is applied for the region of interest such as the reactor core. Fuel performance code is extended to consider full core pin-wise fuel behaviour. The MARU platform is developed for easy integration of the codes to be coupled. An initial stage of the steam line break accident is simulated on the MARU platform. As cold coolant is injected from the cold leg into the reactor pressure vessel, the power increases due to the moderator feedback. Three-dimensional coolant and fuel behaviour are qualitatively visualized for easy comprehension. Moreover, quantitative investigation is added by focusing on the enhancement of safety margin by means of comparing the minimum departure from nucleate boiling ratio (MDNBR). Three factors contributing to the increase of the MDNBR are proposed: Various geometric parameters, realistic power distribution by neutron kinetics code, Radial coolant mixing including sub-channel physics model.

• 한국해양공학회지
• /
• 제12권1호
• /
• pp.135-142
• /
• 1998

In this study, the frequency transfer function of motions are predicted from the result of a full-scale seakeeping trials. Because the real sea has the characteristics of multi-directional waves,we compare the results in the one directional waves with ones in the directional waves. For calculation of the frequency transfer function in the directional waves, Takezawa's inverse estimation method was introduced and the frequency ranges were divided into three parts in order to consider following seas. The full-scale seakeeping trials was executed in the south sea of Korea using the stern trawler. Those results show that analysis method of the multi-directional waves is more reliable than that of one directional waves, and confirm the possibility of applying this method to the full-scale seakeeping trials.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2821-2829
• /
• 2011

Since the KTX was in operation in 2004, a number of researches on increasing the train speed have been conducted. Currently, the Honam High-speed train system is designed for the operation velocity of 350km/h. The societal demand expects higher operation speed, whereas the existing construction method and design specification are questioned in the KTX operation in the velocity over 350 km/h. In this study, a full-scale model test was conducted to obtain the preliminary data that is necessary to understand deformation characteristics of the reinforced road bed and the subgrade layers. In the full-scale model test, direct arrival seismic tests, crosshole seimic test, in-situ bender element test and sensing bar test were employed to measure the stiffness and deformation of the trackbed. The systematic analysis on the different set of measurements enhances the understanding of the behavior of the trackbed.

• 제어로봇시스템학회논문지
• /
• 제2권2호
• /
• pp.121-126
• /
• 1996

The hydrodynamic coefficients estimation (HCE) is important to design the autopilot and to predict the maneuverability of an underwater vehicle. In this paper, a system identification is proposed for an HCE of an underwater vehicle. First, we attempt to design the HCE algorithm which is insensitive to initial conditions and has good convergence, and which enables the estimation of the coefficents by using measured displacements only. Second, the sensor and measurement system which gauges the data from the full scale trials is constructed and the data smoothing algorithm is also designed to filter the noise due to irregular fluid flow without changing the data characteristics itself. Lastly the hydrodynamic coefficients are estimated by applying the measured data of full scale trials to the developed algorithm, and the estimated coefficients are verified by full scale trials.

• 한국가시화정보학회지
• /
• 제4권1호
• /
• pp.8-13
• /
• 2006

Fire simulation has been developed for decades to analyze fire cases and provide a tool to study fundamental fire dynamics and combustion. There are three way of fire simulation which are a full scale simulation, an experimental simulation and a computational simulation. In case of a full scale simulation, because a higher cost, a higher risk, more efforts are needed, a demand for it has been decreased. But recently a demand for an experimental simulation and a computational simulation has been increased. A computational simulation has several advantages; lower cost, short period, many case studies, more visual results, a quantitative result and etc. FDS(Fire Dynamics Simulator) which has been developed in BFRL(Building and Fire Research Laboratory), NIST(National Institute of Standards and Technology) is a popular world wide code for fire simulation. Lack of accurate predictions by the model could lead to erroneous conclusions with regard to fire safety. All results should be evaluated by the informed judgment of the qualified user.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2014년도 춘계학술대회
• /
• pp.36-37
• /
• 2014

It is necessary to develop highly sophisticated Modeling & Simulation (M&S) system for the scientific investigation of marine accident causes and for the systematic reproduction of accidental damage procedure. To ensure an accurate and reasonable prediction of marine accidental causes, such as collision, grounding and flooding, full-scale ship M&S simulations would be the best approach using hydrocode, such as LS-DYNA code, with its Fluid-Structure Interaction (FSI) analysis technique. The objectivity of this paper is to present three full-scale ship collision, grounding and flooding simulation results of marine accidents, and to show the possibility of the scientific investigation of marine accident causes using highly sophisticated M&S system.