• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.600-608
• /
• 2016

This paper proposes a new high-efficient interleaved phase-shift full-bridge (PSFB) converter for low-voltage and high-current power systems. The proposed converter is composed of three switch-bridges and two transformers in the primary side and two rectifiers in the secondary side. Each transformer handles half of the total power with an interleaved operation, so that the proposed converter has high system reliability, as much as the conventional interleaved PSFB converter. The soft-switching characteristics of the proposed converter are better than those of the conventional converter due to the modulated primary side configuration. The proposed converter represents a single lagging-leg bridge, which has a poor soft switching condition in its operation, while the conventional converter has two lagging-leg bridges in its operation. Therefore, the number of switches having hard-switching conditions is reduced by half in the proposed converter. In addition, the reduced switch counts in the primary side of the proposed converter helps decrease the complexity of the proposed converter compared to that of the conventional converter. The operational principle and analysis are presented in this paper and the characteristics are verified using a PSIM simulation with 3kW server power specification.

• Journal of Sensor Science and Technology
• /
• v.5 no.5
• /
• pp.21-29
• /
• 1996

A piezoresistive silicon acceleration sensor with 8 beams, utilized by an unique silicon micromachining technique using porous silicon etching method which was fabricated on the selectively diffused (111)-oriented $n/n^{+}/n$ silicon subtrates. The width, length, and thickness of the beam was $100\;{\mu}m$, $500\;{\mu}m$, and $7\;{\mu}m$, respectively, and the diameter of the mass paddle (the region suspended by the eight beams) was 1.4 mm. The seismic mass on the mass paddle was formed about 2 mg so as to measure accelerations of the range of 50g for automotive applications. For the formation of the mass, the solder mass was loaded on the mass paddle by dispensing Pb/Sn/Ag solder paste. After the solder paste is deposited, Heat treatment was carried out on the 3-zone reflow equipment. The decay time of the output signal to impulse excitation of the fabricated sensor was observed for approximately 30 ms. The sensitivity measured through summing circuit was 2.9 mV/g and the nonlinearity of the sensor was less than 2% of the full scale output. The output deviation of each bridge was ${\pm}4%$. The cross-axis sensitivity was within 4% and the resonant frequency was found to be 2.15 KHz from the FEM simulation results.

• Current Research on Agriculture and Life Sciences
• /
• v.24
• /
• pp.37-42
• /
• 2006

The purpose of this study was a biota research and analysis for Close-to-nature stream restoration planning of Shinchun. The summary of this study is as follows; 1) The vascular plants in research area recorded of 45 species and insect fauna recorded of 34 species of 8 orders. As a result of table of community classification, the communities were two group; Quercus variabilis community(I), Pinus densiflora-Quercus variabilis-Quercus dentata community(II). 2) As a result of analysis on correlation of tree species, the level of significance in positive correlation between Quercus dentata and Corylus heterophyll aindicated 1% and between Pinus densiflora and Lespedeza bicolor also indicated 1%. 3) As a result of DBH analysis, it is expected that Quercus variabilis and Quercus dentata will dominateover other species in competition and its succession continuously maintains from now on in community I. In community II, it is assumed that there is a high possibility of changing into community of Quercus such as Quercus mongolica, Quercus dentata, and Quercus variabilis. 4) As a result of analysis on insect fauna, insect fauna consists of 94% of whole species as 32 species, 23 families, 8 orders. And 7 species, 7 families 4 orders was found in highly urbanized area, the vicinity of Sang-Dong bridge. 5) As mentioned above, Based on A biota fundamental research, Close-to-nature stream restoration planning were full of suggestions: i) Designating ecosystem preservation area, ii) Making Close-to-nature stream revetments, iii) Making pool-and-riffle, vi) Making decks for observation and walks for nature experience, v) Creating wetland biotope. Through these methods, it is necessary to promote bio-diversity and lead people to the space for eco-learning.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.88.1-88.1
• /
• 2010

Organic dyes, because of their many advantages, such as high molar extinction coefficients, convenience of customized molecular design for desired photophysical and photochemical properties, inexpensiveness with no transition metals contained, and environment-friendliness, are suitable as photosensitizers for the Dye-sensitized Solar Cell (DSSC). The efficiency of DSSC based on metal-free organic dyes is known to be much lower than that of Ru dyes generally, but a high solar energy-to-electricity conversion efficiency of up to 8% in full sunlight has been achieved by Ito et al. using an indoline dye. This result suggests that smartly designed and synthesized metal-free organic dyes are also highly competitive candidates for photosensitizers of DSSCs with their advantages mentioned above. Recently, the performance of DSSC based on metal-free organic dyes has been remarkably improved by several groups. We had reported the novel organic dye with double electron acceptor chromophore, which was a new strategy to design an efficient photosensitizer for DSSC. To verify the strategy, we synthesized organic dyes whose geometries, electronic structures and optical properties were derived from preceding density functional theory (DFT) and time-dependent density functional theory (TD-DFT) calculations. In this paper, we successfully synthesized the chromophore containing multi-acceptor push-pull system from triphenylamine with thiophene moieties as a bridge unit. Organic dyes with a single electron acceptor and double acceptor system were also synthesized for comparison purposes. The photovoltaic performances of these dyes were compared, and the recombination dark current curves and the incident photon-to-current (IPCE) efficiencies were also measured in order to characterize the effects of the multi-anchoring groups on the open-circuit voltage and the short-circuit current. In order to match specifications required for practical applications to be implemented outdoors, light soaking and thermal stability tests of these DSSCs, performed under $100mWcm^{-2}$ and $60^{\circ}C$ for 1000h.

• Journal of Digital Contents Society
• /
• v.19 no.6
• /
• pp.1145-1150
• /
• 2018

In order to realize the new diplomatic development for the establishment of 'Asia Fate Community', Xi Jinping has adopted a "One Road, One Belt" policy. Based on five core philosophies, One Road, One Belt with neighboring countries has been established to full-sided cooperation and mutual benefit relations. In this paper, I would like to suggest some suggestions on how to use China's One Road, One Belt policy and Korea's Eurasian Initiative in Development strategy of tourism contents. First, The bridge role of Korean companies should lead to the development of tourism contents. Second, the promotion of tourism contents development for Chinese individual tourists should lead to another tourism contents. Third, we need to find ways to win joint orders with local companies in China so that they can lead to tourism contents. Fourth, seeking active use of workers and international students living in Korea. Fifth, the development of tourism contents based on cooperative relationship with North Korea.

• Journal of Digital Convergence
• /
• v.12 no.1
• /
• pp.1-12
• /
• 2014

The 2020 Digital polarization in accordance with rapid information and communication technology (ICT) development arises as an important issue in the society of the time in S. Korea. And at that time of 2020 S. Korea society due to the multicultural families of nearly one million people are expected to start full-scale multicultural society. So this study has been developed ways to bridge the gap as the digital divide with a discussion of multicultural society policy relevant to advent of the era of the informatization. Also under changing environment of this new paradigm, this study proposed that the future strategic direction like expanded and enhanced information services relevant to multicultural families in S. Korea. So this study focused on the strategy consulting of multicultural society policy with e-Government of S. Korea by the application of 'scenario planning' as a foresight method. As a result, A desirable future vision of multicultural society policy with e-government in S. Korea is to build 'open platform' based on ICT-integrated data services.

• Clinics in Shoulder and Elbow
• /
• v.18 no.4
• /
• pp.206-210
• /
• 2015

Background: Assessment of the clinical outcomes after rotator cuff repair is essential for their effectiveness on treatment. The Korean Shoulder and Elbow Society devised the Korean Shoulder Scoring System (KSS) for patients with rotator cuff disorder. The purpose of this study was to evaluate the availability of the KSS for assessment of clinical outcomes in patients after arthroscopic rotator cuff repair, and for comparison with other appraisal scoring systems. Methods: A total of 130 patients with partial-thickness or full-thickness rotator cuff tear who underwent arthroscopic repair using a single row or double row suture bridge technique were enrolled. The average follow-up period was 25.9 months. All patients were classified according to various factors. Comparison within corresponding categories was performed, and the correlation between the KSS and other shoulder assessment methods including University of California Los Angeles (UCLA), Constant and American Shoulder and Elbow Surgeons (ASES) score was analyzed. Results: Total score of the KSS response had increased from 59.6 preoperatively to 88.96 at last follow-up. All KSS domains, including function, pain, satisfaction, range of motion, and muscle power had improved up to 24 months postoperatively. Statistical significance was observed mainly in preoperative measurements with number and size of torn tendons, and greater than or equal to grade 3 of fatty infiltration. The KSS was best correlated with the UCLA scoring system in both preoperative (r=0.785) and postoperative (r=0.951) measurements. Conclusions: The KSS was highly reliable and valid as a discriminative instrument, and it showed strong correlation with ASES and UCLA scoring systems.

• Journal of the Korea Society of Computer and Information
• /
• v.6 no.2
• /
• pp.8-13
• /
• 2001

We demonstrate a pulsed CO$_2$laser with long pulse duration of millisecond order in the low pressure less than 30 Torr. A new power supply for our laser system switches the voltage of AC power line(60㎐) directly. The power supply doesn't need elements such as a rectified bridge, energy-storage capacitors. and a current-limiting resistor in the discharge circuit. In order to control the laser output power, the pulse repetition rate is adjusted up to 60㎐ and the firing angle of SCR gate is varied from 30˚ to 150˚. A ZCS(Zero Crossing Switch) circuit and a PIC one-chip microprocessor are used to control the gate signal of SCR precisely. The maximum laser output is 23W at the total pressure of 18 Torr, the pulse repetition rate of 60㎐, and SCR gate firing angle of 90˚. In addition, the obtained laser pulse width is approximately 3㎳(FWHM)

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.3
• /
• pp.193-200
• /
• 2006

This paper suggests a 6-pulse-shift converter structure with PWM current-source inverter based on buck-boost configuration to improve the efficiency and to reduce the switching frequency of inverter for photovoltaic generation system, the device can be operated as interface system between solar module system and power system grid without energy storage cell. The circuit has six current-source buck-boost converter which operate chopper part and kas one full bridge inverter which make a decision the polarity of AC output. Therefore, the proposed PWM power inverter has advantages such as the reduction of witching loss and realization of unity power factor operation. The theoretical backgrounds are discussed and the input-output characteristics for the implemented prototype inverter using TMS320F2812 are verified experimentally in this paper.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.1
• /
• pp.109-117
• /
• 2000

A full bridge type double resonant high frequency resonant inverter to give VVVF function in the inverter used as power source of induction heating at high frequency is presented in this paper. This proposed inverter can reduce distribution of the switching current because of using the current of serial resonant circuit to the input current of the parallel one and this paper also realize the output control of independence irrespective of the switching frequency using Phase-shift. The analysis of the proposed circuit is generally described by using the normalized parameters. Also, the principle of basic operating and the its characteristics are estimated by the parameters, such as switching frequency, the variation of phase angle ($\phi$) of Phase-shift.