• 전기학회논문지P
• /
• 제67권2호
• /
• pp.82-89
• /
• 2018

This paper presents a novel prototype of dual mode control based phase shift ZVS PWM high frequency load resonant inverter with lossless snubber capacitors in addition to a single active auxiliary resonant snubber for electromagnetic induction heating(IH) foam metal based consumer fluid dual packs(DPA) heater. The operating principle in steady state and unique features of this voltage source soft switching high frequency inverter circuit topology are described in this paper. The lossless snubber and auxiliary active resonant snubber assisted constant frequency phase shift ZVS PWM high frequency load resonant inverter employing IGBT power modules actually is capable of achieving zero voltage soft commutation over a widely specified power regulation range from full power to low power. The steady state operating performances of this dual mode phase shift PWM series load resonant high frequency inverter are evaluated and discussed on the basis of simulation and experimental results for induction heated foam metal heater which is designed for compact and high efficient moving fluid heating appliance in the consumer pipeline systems.

• 조명전기설비학회논문지
• /
• 제18권3호
• /
• pp.135-141
• /
• 2004

전기 에너지를 이용한 살균장치는 화학적인 과정이 없으며, 2차적인 환경 오염도 발생시키지 않는 장점을 가지고 있다. 또한 전력변환회로에는 영전류 스위칭과 영전압 스위칭을 사용한 소프트 스위칭 토폴로지에 의하여 스위칭 손실을 감소시키고, 장치의 크기를 소형화시킬 수 있는 장점이 있다. 제안한 전원장치는 기존의 장치들보다 출력전류가 매우 적어 전원 시스템으로 제작할 경우 소형화가 가능하며 가격이 저감될 수 있다. 따라서 이 전원 장치는 전력 소비가 적고 전력 변환이 급격한 곳에 적합하다.

• Journal of Korean Neurosurgical Society
• /
• 제47권4호
• /
• pp.295-297
• /
• 2010

Candida is a relatively rare cause of spinal infections that commonly affects immunocompromised patients. A 70-year-old woman, who underwent a lumbar discectomy on L5-S1 two months earlier, was admitted to our department complaining of persistent back and leg pain. Magnetic resonance imaging showed irregular enhancing mass lesion in L5-S1 intervertebral space, suggest of pyogenic discitis with epidural abscess. The surgery was performed via retroperitoneal approach and the infected material at L5-S1 intervertebral space was removed. The histological examination of the specimen revealed chronic inflammation involving the bone and soft tissue, and a culture of the excised material was positive for Candida parapsilosis. The patient received intravenous fluconazole for 4 weeks after surgery and oral fluconazole 400 mg/day for 3 months after surgery. The patient made a full recovery with no symptoms 6 months after surgery. We present a rare case of spondylodiscitis after a lumbar discectomy due to Candida parapsilosis and discuss treatment option with a review of the literatures.

• Journal of Power Electronics
• /
• 제9권2호
• /
• pp.215-223
• /
• 2009

A design methodology for transformers including integrated and center-tapped structures for LLC resonant converters is proposed. In the LLC resonant converter, the resonant inductor in the primary side can be merged in the transformer as a leakage inductance. And, the absence of the secondary filter inductor creates low voltage stress on the secondary rectifiers and is cost-effective. A center-tapped structure of the transformer secondary side is widely used in commercial applications because of its higher efficiency and lower cost than full-bridge structures in the rectifying stages. However, this transformer structure has problems of resonance imbalance and transformer inefficiency caused by leakage inductance imbalance in the secondary side and the position of the air-gap in the transformer, respectively. In this paper, gain curves and soft-switching conditions are derived by first harmonic approximation (FHA) and operating circuit simulation. In addition, the effects of the transformer including integrated and center-tapped structures are analyzed by new FHA models and simulations to obtain an optimal design. Finally, the effects of the air-gap position are analyzed by an electromagnetic field simulator. The proposed analysis and design are verified by experimental results with a 385W LLC resonant converter.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.171-176
• /
• 2011

The purposes of the research were to evaluate system performance and response of building structure under external load for full scale modal-testing-tower applied toggle bracing and lead rubber damper(LRD). The dynamic properties of the structure were measured before and after installing damper under harmonic excitation using the AMD and the results were compared. The harmonic excitation condition is to increase 0.01Hz sine sweep signal from 0.49Hz to 0.63Hz. As a result of measuring resonant frequency, before installing damper is 0.55Hz and after installing damper is 0.62Hz. The experimental results after installing damper were also distinguished from simulation results and the main cause of this results is temperature dependency property of rubber material.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1290-1295
• /
• 2006

The 120 meters high pressure feedwater heater drain piping in nuclear power plant had been suffered by excessive vibration from the beginning of power generation. As time goes by, the piping vibration was beyond the allowable limit and an appropriate countermeasure was required to prevent the fatigue failure of the pipeline from the abnormal vibration. In this study, the vibrational characteristics of high pressure feedwater heater drain piping and the countermeasure for abnormal vibration were investigated. Among the several vibration reduction methods, the piping layout changed by making the smooth pipeline was applied to the high Pressure feedwater heater drain piping in nuclear Power plant. Applying the countermeasure, the vibration level was found to reduce over 54 percents and was satisfied under the allowable velocity at the full-power operation condition.

• Clinics in Shoulder and Elbow
• /
• 제9권1호
• /
• pp.68-72
• /
• 2006

Purpose: To demonstrate arthroscopically the presence of bilateral shoulder "mirror lesions" due to overhead work. Materials and Methods: A cross-sectional study was performed in a historical cohort of 10 male tire plant workers who underwent MRI studies of both shoulders. Bilateral intraarticular shoulder pathology was diagnosed by magnetic resonance imaging and confirmed by arthroscopy. "Mirror lesions" were defined as similar pathology between an individual patient's two shoulders. Results: We report on ten patients who had bilateral "mirror lesions." The most common mirror lesions were tears of the rotator cuff. Most patients (7 of 10) had more than one mirror lesion in their shoulders. There were two bilateral full thickness tears involving the supraspinatus and infraspinatus, four bilateral partial thickness supraspinatus tears, six bilateral partial or upper corner lesion complete subscapularis tears, and one bilateral complete supraspinatus tear. Conclusion: Occupational overhead work with simultaneous use of both arms is associated with bilateral shoulder lesions verified by arthroscopy. By demonstrating the work-related bilateral shoulder involvement, this study suggests an etiopathogenesis for these lesions and provides rational for developing worksite prevention strategies.

• Clinics in Shoulder and Elbow
• /
• 제19권2호
• /
• pp.84-89
• /
• 2016

Background: The purpose of this study was to assess the results of arthroscopic bridging repair using a human dermis allograft in the treatment of massive irreparable rotator cuff tears. Methods: From November 2009 to April 2011, 12 patients underwent arthroscopic bridging repair using a human dermis allograft in the treatment of massive irreparable rotator cuff tears. Patients were followed for an average of 33.9 months. Clinical outcome was evaluated preoperatively and postoperatively using the mean University of California, Los Angeles (UCLA) score and the Korean Shoulder Scoring System (KSS). Magnetic resonance imaging (MRI) was performed postoperatively at an average of 6.5 months. Results: At a mean follow-up of 33.9 months (range, 25 to 42 months), 11 out of 12 patients were satisfied with their procedure. Patients showed significant improvement in their mean modified UCLA score from 15.9 preoperatively to 29.4 postoperatively (p=0.001). The mean KSS score improved from 45.6 preoperatively to 80.5 postoperatively (p=0.002). In MRI studies, 9 out of 12 patients had full incorporation of the graft into the native rotator cuff remnant. To date, there has been no intraoperative or postoperative complication from the graft procedure, such as infection or allograft rejection, in any patient. Conclusions: Arthroscopic bridging repair using a human dermis allograft can be considered as an option in treatment of select cases of massive irreparable rotator cuff tears, resulting in high patient satisfaction.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.988-989
• /
• 2006

The ultrasonic welding is with features of high electric conductivity and hot conductivity when it is used in metallic bond, high electric conductivity and hot conductivity when it is used in various metallic bonds, excellent quality when it is used for advanced junction, easiness when it is used in various metallic bonds, being needless for the exhaustive material and being benefit for the environment. Currently the use of ultrasonic welding is increasing in the industrial fields such as the automobile battle, the refrigerator, the air conditioner, the battery and the solar cell junction. But the production ability is insufficient in our country and it is necessary to explore the core technology of the ultrasonic welding. In this paper, the output LC resonance filter and 35kHz squal wave onion occurrence Full Bridge plans was designed. The output examination of the ultrasonic oscillator and the ultrasonic welding examination were done. The method for getting more smooth result in the ultrasonic welding machine system was researched.

• Journal of Astronomy and Space Sciences
• /
• 제35권1호
• /
• pp.7-18
• /
• 2018

We have investigated the intensities and full width at half maximum (FWHM) of the high dispersion spectroscopic N III emission lines of AG Peg, observed with the Hamilton Echelle Spectrograph (HES) in three different epochs at Mt. Hamilton's Lick Observatory. The earlier theoretical Bowen line study assumed the continuum fluorescence effect, presenting a large discrepancy with the present data. Hence, we analyzed the observed N III lines assuming line fluorescence as the only suitable source: (1) The O III and N III resonance line profiles near ${\lambda}$ 374 were decomposed, using the Gaussian function, and the contributions from various O III line components were determined. (2) Based on the theoretical resonant N III intensities, the expected N III Bowen intensities were obtained to fit the observed values. Our study shows that the incoming line photon number ratio must be considered to balance at each N III Bowen line level in the ultraviolet radiation according to the observed lines in the optical zone. We also found that the average FWHM of the N III Bowen lines was about $5km{\cdot}s^{-1}$ greater than that of the O III Bowen lines, perhaps due to the inherently different kinematic characteristics of their emission zones.