• 대한치과교정학회지
• /
• 제39권2호
• /
• pp.83-94
• /
• 2009

최근 골내 고정 형태의 temporary anchorage device (TAD)를 많이 이용하게 되면서 다양한 위치로부터 그리고 강한 교정력을 이용할 수 있게 되었다. 이에 따라 치아군의 이동양상을 예측하고 치료계획을 세우기 위하여 다양한 치아군의 저항중심의 위치에 대한 이해가 필요하게 되었다. 본 연구에서는 3차원 유한요소해석을 이용하여 상악 4전치, 6전치 그리고 상악 전 치열에서 3차원적 저항중심의 위치를 조사하고자 하였다. 이를 위하여 상악 전치열 14개 치아와 치근막 및 치조골의 3차원 유한요소모델을 제작하였고, 각 치아군별로 치관부를 협측, 설측 호선, 설측 splint wire로 고정하여 개별 치아이동을 최소화하고 적용된 힘이 치아에 고루 분산되도록 하였다. 상악 중절치 절단연의 중점에서 연장된 와이어 빔에 수직, 수평으로 100 g 또는 200 g의 힘을 가하여 치아의 변위를 해석하고, 각 치아군에 속한 치아들이 최대한 평행이동 되는 힘의 적용부위를 저항중심으로 정의하였다. 연구결과 상악 4전치군의 저항중심은 상악 중절치 절단연으로부터 치근방향 13.5 mm, 후방 12.0 mm, 상악 6전치군은 상악 중절치 절단연으로부터 치근방향 13.5 mm, 후방 14.0 mm에 위치하였으며 상악 전치열군의 저항중심은 상악 중절치 절단연으로부터 치근방향 11.0 mm, 후방 26.5 mm에 위치하였다. 본 유한요소 실험모델을 이용하여 얻은 결과는 교정치료의 효율성을 높일 수 있으리라 생각된다.

• 대한치과교정학회지
• /
• 제39권5호
• /
• pp.278-288
• /
• 2009

효과적인 교정치료계획의 수립을 위하여 치열군의 저항중심의 위치에 대한 평가는 필수적이다. 이번 연구의 목적은 상악 치열군(4전치, 6전치, 14치아)에서 치조골 손실에 따른 저항중심의 위치변화를 조사해보고자 하였다. 상악 전치열 14개 치아와 치주인대 및 0 mm, 2 mm, 4 mm 손실된 치조골의 3차원 유한요소 모델을 제작하였고 각 치아군(4전치, 6전치, 14치아)별로 치관부를 협측, 설측호선 및 splint wire로 고정하여 치아군 모델을 제작한 후 상악 중절치의 절단연 중점에서 연장된 splint wire에 4전치와 6전치군에는 200 g, 14치아군에는 400 g의 후방 견인력과 압하력을 적용하여 저항중심의 수직적, 수평적 위치를 분석하였다. 4전치군에서 저항중심의 수직 위치는 치조골 0 mm, 2 mm, 4 mm 손실에 따라 중절치의 절단연에서 치근방향 13.5 mm, 14.5 mm, 15 mm, 수평 위치는 후방 12 mm, 12 mm, 12.5 mm, 6전치군에서는 치근방향 13.5 mm, 14.5 mm, 15.5 mm, 후방 14 mm, 14 mm, 14.5 mm, 14치아군에서는 치근방향 11 mm, 13 mm, 14.5 mm, 후방 26.5 mm, 27 mm, 25.5 mm에 위치하였다. 모든 치아군에서 저항중심은 치조골 손실에 따라 치근첨 방향으로 이동하였으나, 치조정과의 거리는 가까워졌고, 4전치군과 6전치군에서 저항중심은 치조골 손실에 따라 후방으로 이동하였으나, 14치아군에서는 치조골 2 mm 손실 시에는 후방으로 이동하였으나, 4 mm 손실 시에는 전방으로 이동하였다.

• 대한치과교정학회지
• /
• 제44권5호
• /
• pp.236-245
• /
• 2014

Objective: To evaluate the therapeutic effects of a preformed assembly of nickel-titanium (NiTi) and stainless steel (SS) archwires (preformed C-wire) combined with temporary skeletal anchorage devices (TSADs) as the sole source of anchorage and to compare these effects with those of a SS version of C-wire (conventional C-wire) for en-masse retraction. Methods: Thirty-one adult female patients with skeletal Class I or II dentoalveolar protrusion, mild-to-moderate anterior crowding (3.0-6.0 mm), and stable Class I posterior occlusion were divided into conventional (n = 15) and preformed (n = 16) C-wire groups. All subjects underwent first premolar extractions and en-masse retraction with preadjusted edgewise anterior brackets, the assigned C-wire, and maxillary C-tubes or C-implants; bonded mesh-tube appliances were used in the mandibular dentition. Differences in pretreatment and post-retraction measurements of skeletal, dental, and soft-tissue cephalometric variables were statistically analyzed. Results: Both groups showed full retraction of the maxillary anterior teeth by controlled tipping and space closure without altered posterior occlusion. However, the preformed C-wire group had a shorter retraction period (by 3.2 months). Furthermore, the maxillary molars in this group showed no significant mesialization, mesial tipping, or extrusion; some mesialization and mesial tipping occurred in the conventional C-wire group. Conclusions: Preformed C-wires combined with maxillary TSADs enable simultaneous leveling and space closure from the beginning of the treatment without maxillary posterior bonding. This allows for faster treatment of dentoalveolar protrusion without unwanted side effects, when compared with conventional C-wire, evidencing its clinical expediency.

• 대한치과보철학회지
• /
• 제28권2호
• /
• pp.91-108
• /
• 1990

The purpose of this study was to compare the maganitude of the discrepancies of the mounting errors in according to the states of dentitions, and to the superoinferior, anteroposterior, and rightleft driecetions. GROUP I. : Fourteen patients 22 to 26 years of age with a full complement of teeth, were used in the study. The criteria fro patient selection were a complete dentition, sparse restorarive treatment, and adequate posterior and anterior occlusan stops. And they had no sign and sympton at TMG area. GROUPII. : Eigth patients 37 to 62 years of age with bilateral free ends. The criteria for patient selection were Kennedy classification class 1 cases, and adequate posterior and anterior stops. And the opposite dentitions were a full complement of teeth. Irreversible hydrocolloid impresiion of each arch was taken of each patient. These were immediatel poured in stone and mounted on a Denar Mark II. Articulator with the arbitrary slidematic face-bow. With hand articulation th e mandibular cast was mounted to the maxillary cast in centric occlusion. Five types of interocclusal records were taken of each patient : (1) aluwax (2) baseplate wax; (3) znic oxide-eugenol pasts; (4) polyether (Ramitec); (5) modeling compound. All measurement of the five selected recording materials were compared with those of the hand-articulated full arch models in centric occlusion or maximum interdigitation. The results were as follows; 1. There were statistical differences in amount of devitation in according to the materials and the states of dentition. The amount of deviation of compound was the largest. 2. There were statistical differences in amount of deviation in complete dentition at all directions. The amount of diviation of compound was the largest. And at the right-left direction the amount of znic oxide-eugenol paste was larger than that of baseplate wax. 3. There was a statistical difference in amount of diviations in partial edentulous dentition at the superoinferior direction. The amount of deviation of compound was larger than that of znic oxide-eugenol paste. 4. There was as statistical difference in amount of deviations in partial edentulous dentition at the right-left direction. The amount of deviation of baseplate wax was larger that tnat of polyether. 5. There was not a statistical difference in amount of diviation in partial edentulous dentition at the anteroposterior direction.