• 한국해안·해양공학회논문집
• /
• 제25권5호
• /
• pp.285-290
• /
• 2013

선형과 천해 edge wave로 구분되는 이들의 거동을 더 잘 이해하기 위해 비교하였다. 본 연구에서는 변수분리법을 사용하여, Ursell (1952)이 해의 유도과정 없이 제시한, 선형 edge wave의 해를 얻었다. 천해 edge wave는 비록 천해방정식으로부터 유도되지만 분산특성을 갖는다. 완만한 해저경사의 경우, 천해 파형은 선형 파형과 거의 같게 되고 천해 파형은 다루기가 쉬운 장점이 있다. Gaussian 분포형태의 이동체에 의해 생성되는 edge wave를 계산하기 위해 천해 고유파형으로 전개한 해를 구성하였고, 이에 대한 결과를 제시하고 특성을 기술하였다.

• Journal of Electrical Engineering and Technology
• /
• 제10권1호
• /
• pp.320-324
• /
• 2015

Mutual coupling between antenna elements of a linear microstrip patch antenna array positioned along the H-plane including the effect of edge reflections is investigated. Simple formulas are presented for the estimation of the grounded dielectric substrate size with minimum mutual coupling. The substrate sizes calculated by these formulas are in good agreement with those obtained by the full-wave simulation and experimental measurement. The substrate size with minimum mutual coupling is a function of the effective dielectric constant for surface waves and the distance between the antenna centers. The substrate size with minimum mutual coupling decreases as the effective dielectric constant for surface waves on a finite grounded dielectric substrate increases.

• Steel and Composite Structures
• /
• 제2권6호
• /
• pp.411-428
• /
• 2002

Non-linear large-displacement elasto-plastic finite element analyses are used to propose design recommendations for the eaves bracket of a cold-formed steel portal frame. Owing to the thinness of the sheet steel used for the brackets, such a structural design problem is not trivial as the brackets need to be designed against failure through buckling; without availability of the finite element method, expensive laboratory testing would therefore be required. In this paper, the finite element method is firstly used to predict the plastic moment capacity of the eaves bracket. Parametric studies are then used to propose design recommendations for the eaves bracket against two potential buckling modes of failure: (1) buckling of the stiffened free-edge into one-half sine wave, (2) local plate buckling of the exposed triangular bracket area.The results of full-scale laboratory tests on selected geometries of eaves bracket demonstrate that the proposed design recommendations are conservative. The use of the finite element method in this way exploits modern computational techniques for an otherwise difficult structural design problem.