• The Journal of Advanced Prosthodontics
• /
• 제15권3호
• /
• pp.145-154
• /
• 2023

PURPOSE. The objective of this study was to investigate how internal structures influence the overall and marginal accuracy of full arch preparations fabricated through additive manufacturing in different printing systems. MATERIALS AND METHODS. A full-arch preparation digital model was set up with three internal designs, including solid, hollow, and grid. These were printed using three different resin printers with nine models in each group. After scanning, each data was imported into the 3D data processing software together with the master cast, aligned and trimmed, and then put into the 3D data analysis software again to compare the overall and marginal deviation whose results are expressed using root mean square values and color maps. To evaluate the trueness of the resin model, the test data and reference data were compared, and the precision was evaluated by comparing the test data sets. Color maps were observed for qualitative analysis. Data were statistically analyzed by one-way analysis of variance and Bonferroni method was used for post hoc comparison (α = .05). RESULTS. The influence of different internal structures on the accuracy of 3D printed resin models varied significantly (P < .05). Solid and grid models showed better accuracy, while the hollow model exhibited poor accuracy. The color maps show that the resin models have a tendency to shrink inwards. CONCLUSION. The internal structure design influences the accuracy of the 3D printing model, and the effect varies in different printing systems. Irrespective of the kind of printing system, the printing accuracy of hollow model was observed to be worse than those of solid and grid models.

• ETRI Journal
• /
• 제42권2호
• /
• pp.272-281
• /
• 2020

Three-dimensional (3D) selfie services, one of the major 3D printing services, print 3D models of an individual's face via scanning. However, most of these services require expensive full-color supporting 3D printers. The high cost of such printers poses a challenge in launching a variety of 3D printing application services. This paper presents a stencil-based 3D facial relief creation method employing a low-cost RGBD sensor and a 3D printer. Stencil-based 3D facial relief is an artwork in which some parts are holes, similar to that in a stencil, and other parts stand out, as in a relief. The proposed method creates a new type of relief by combining the existing stencil techniques and relief techniques. As a result, the 3D printed product resembles a two-colored object rather than a one-colored object even when a monochrome 3D printer is used. Unlike existing personalization-based 3D printing services, the proposed method enables the printing and delivery of products to customers in a short period of time. Experimental results reveal that, compared to existing 3D selfie products printed by monochrome 3D printers, our products have a higher degree of similarity and are more profitable.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.340-343
• /
• 2007

We describe the DuPont Displays full color OLED printing and materials technologies. The process is more cost-effective and scalable than thermal evaporation through shadow masks. The materials lifetime is sufficient for most portable applications and is nearing that required for stationary displays. Recently, 4.3" WQVGA displays were demonstrated.

• 한국융합학회논문지
• /
• 제11권11호
• /
• pp.123-134
• /
• 2020

최근 3D프린터의 발전에 따라 실제 제품과 유사하게 제작하고 싶은 니즈가 늘어가고 있다. 이에 따라 FDM 풀 컬러 3D프린터가 개발되어 활발하게 보급되고 있으나, GUI디자인은 그에 미치지 못하여 사용자로 하여금 혼란을 야기한다. 이에 따라 본 연구는 문헌조사를 진행하였고, 사례 조사를 통하여 FDM 풀 컬러 3D프린터의 현황을 파악하고 선행연구를 바탕으로 GUI디자인의 구성요소를 분석하였다. 도출한 GUI디자인의 구성요소에 맞춰 체크리스트 초안을 도출하였으며, 세 차례의 델파이 조사를 통해 초안 50항목 중 24항목을 삭제하였으며 나머지 26가지 항목에 대한 타당성을 검증하였다. 그 결과 레이아웃은 직관적인 화면 구성과 사용빈도가 높은 메뉴 위주로 구성하여야 하며, 텍스트는 직관적으로 눈에 띄며 기능을 명확하게 전달하여야 한다. 또한 아이콘은 눈에 잘 보이는 위치에 위치하고 실생활에서 차용하여 이미지화하여야한다. 마지막으로 컬러는 강조색을 사용하여 사용자에게 피드백을 주고, 출력물과의 색상이 겹치지 않도록 하여야 함을 알 수 있었다.

• 보존과학회지
• /
• 제36권5호
• /
• pp.306-314
• /
• 2020

도자기 복원에 사용되는 합성수지는 노화 현상과 유물 손상 가능성 등의 이유로 새로운 재료 및 복원 방식 연구의 필요성이 나타났다. 본 연구에서는 최근 연구되고 있는 3차원 디지털 기술을 활용한 복원 방식에 추가로 풀 컬러 3D 프린터를 접목하여 색상 정보를 지닌 결실 부를 출력하고자 하였다. 물성 실험을 통해 물성을 알아보고, 백자발과 분청사기접시를 대상으로 결실부를 출력하여 색도 및 광택도를 비교하였다. 실험 결과, 출력물은 기존 복원 재료와 인장강도는 유사했으며 압축강도는 약 1.4~2배 높게 측정되었다. NIST에 의한 색차 값 평가표에 의하면, 백자발은 ΔE^*ab 1.55로 눈에 띄는 정도, 분청사기접시는 3.34로 감지할 정도로 나타났다. 프린터의 한계로 정확한 색상 표현은 불가능하였지만 비접촉식 방식으로 손상 가능성을 최소화할 수 있었다. 손상 가능성이 높은 대상물에 적용하거나 결실부의 의도적인 색상 구별을 통해 전시효과의 목적 등으로 활용이 가능할 것으로 판단된다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제7권2호
• /
• pp.16-27
• /
• 2015

Holography technology which was developed by Dennis Gabor (1900~1979) in 1948 is a technology to record wave planes of actual 3D objects. It is known as the only technology which can express 3D information most perfectly close to human-friendly. Holography technology is widely used in advertisement, architecture and arts as well as science technology areas. Especially, digital holographic print which is an applied area is greatly used in military map, architecture map and cultural asset restoration by printing and reproducing 3D information. Holography is realized by recording and reproducing the amplitude and phase information on high resolution film using coherent light like laser. Recording materials for digital holographic printer are silver halide, photoresist and photopolymer. Because the materials have different diffraction efficiency according to film characteristics of each manufacturer, appropriate guide lines should be suggested through efficiency analysis of each film. This paper suggests appropriate guide lines through the diffraction efficiency measurement of silver halide which is a holographic printer recording medium. And the objective of this study is to suggest appropriate guide lines through diffraction efficiency analysis of Ultimate 08-C and PFG-03C which are commercially used. The experiment was prepared by self-diffraction efficiency system which measures the strength with the defector by penetrating RGB recording medium and concentrating diffracted beams through collimating lens. The experiment showed Geola's PFG-03C which is a silver halide for full color has price/performance advantage in optical hologram recording, but recording angles and reproduction angles are irregular for digital holographic printer recording. Ultimate's Ultimate08-C for full color shows its diffraction efficiency is relatively stable and high according to recording angles and laser wavelength.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2013년도 하계학술대회
• /
• pp.83-84
• /
• 2013

홀로그래픽 스테레오그램은, 양안 스테레오스코픽 영상들을 레이저 기준파와 간섭시켜 생성된 홀로그래픽 패턴을 감광매질인 홀로그래픽 필름에 기록한 후, 이를 다시 광학적 회절을 이용하여 3차원 영상으로 재현하는 3차원 디스플레이의 한 방법이다. 본 논문에서는 다시점의 full-color, full-parallax 영상을 디지털 방식의 스테레오그램으로 제작하여 3차원 입체 영상으로 재현하기 위한 기록 시스템에서, 기록 매질인 홀로그래픽 필름 면에서의 영상을 고해상도 영상 센서를 이용하여 직접 획득하고, 이 영상 정보를 분석하여 광축을 제어함으로써, 왜곡없는 최적의 호겔을 형성하여 높은 회절 효율을 갖는 스테레오그램을 제작하기 위한 방법 및 장치에 대한 연구개발 결과를 기술하였다.