• Nuclear Engineering and Technology
• /
• 제50권7호
• /
• pp.1017-1023
• /
• 2018

The measurement and calculation of neutronic parameters in nuclear research reactors has an important influence on control and safety of the nuclear reactor. The power peaking factors, reactivity coefficients and kinetic parameters are the most important neutronic parameter for determining the state of the reactor. The position of the control shim safety rods in the core configuration affects these parameters. The main purpose of this work is to use the MTR_PC package to evaluate the effect of the partially insertion of the control rod on the neutronic parameters at the operating core of the Tehran Research Reactor. The simulation results show that by increasing the insertion of control rods (bank) in the core, the absolute values of power peaking factor, reactivity coefficients and effective delayed neutron fraction increased and only prompt neutron life time decreased. In addition, the results show that the changes of moderator temperature coefficients value versus the control rods positions are very significant. The average value of moderator temperature coefficients increase about 98% in the range of 0-70% insertion of control rods.

• 한국수소및신에너지학회논문집
• /
• 제20권1호
• /
• pp.31-37
• /
• 2009

An ejector is a machine utilized for mixing fluid, maintaining a vacuum, and transporting fluid. The Ejector enhances system efficiency, are easily operated, have a mechnically simple structure, and do not require a power supply. Because of these advantages, the ejector has been applied to a variety of industrial fields such as refrigerators, power plants and oil plants. In this work, an ejector was used to safely recycle anode tail gas in a 5 kW Molten Carbonate Fuel Cell system at KEPRI(Korea Electric Power Research Institute). In this system, the ejector is placed at mixing point between the anode tail gas and the cathode tail gas or the fresh air. Commercial ejectors are not designed for the actual operating conditions for our fuel cell system. A new ejector was therefore designed for use beyond conventional operating limits. In this study, the entrainment ratio is measured according to the diametrical ratio of nozzle to throat in the designed ejector. This helps to define important criteria of ejectors for MCFC recycling.

• 한국전산구조공학회논문집
• /
• 제16권1호
• /
• pp.95-104
• /
• 2003

본 논문은 사각형 연료 탱크 내 비점성, 비압축성, 비회전 유동에 대한 슬로싱 주파수 응답의 유한요소 해석을 다룬다. 지배방정식으로 포텐셜 이론을 기반으로 한 라플라스 방정식을 적용한다. 슬로싱 운동이 작다고 가정하여 선형화된 자유표면 조건을 적용하였고, 변수분리기법을 이용하여 이론해를 구하였다. 점성 감쇠에 따른- 에너지 소산의 영향을 구현하기 위해 가상치 점성 계수를 도입하였으며, 이고 인해 공진 주파수에서 응답의 발산을 방지할 수 있나. 슬로싱 응답의 최대 진폭을 예측하기 위해 9절점 요소를 사용한 유한요소법을 이용하여 해석하였다. 슬로싱 높이, 유체 내부 동수압 및 내부 유체력의 수치 결과는 이론해와 잘 일치하였다. 유한요소 시험 프로그램을 검증한 후, 유체높이에 따른 슬로싱 주파수 응답 특성을 분석하였다.

• 수산해양기술연구
• /
• 제49권3호
• /
• pp.282-290
• /
• 2013

The global warming related to GHG (greenhouse gases) emissions from industries is a major issue globally. Furthermore, GHG emissions from the fishery industries also represent an important issue, as indicated by "The Code of Conduct for Responsible Fisheries" at the Cancun, Mexico, meeting in 1992 and by the Kyoto protocol in 2005. Korea pronounced itself to be a voluntary exclusion management country at the 16th IPCC at Cancun, Mexico, in 2010. However, few analyses of GHG emissions from Korean fisheries have been performed. Therefore, a quantitative analysis of GHG emissions from the major Korean fisheries is needed before guidelines for reducing GHG emissions from the fishing industry can be established. The aim of this study was to assess the present GHG emissions from the Korean Purse seine fishery using the LCA (life cycle assessment) method. The system boundary and allocation method were defined for the LCA analysis. The fuel consumption factor of the purse seine fishery was also calculated. The GHG emissions for the edible fish were evaluated by determining the weights of whole fish and gutted fish. Finally, the GHG emissions required to produce 1kg of whole fish and 1kg of edible fish were deduced. The results will help determine the GHG emissions from the fishery. They will also be helpful to stakeholders and the government in understanding the circumstances involved in GHG emissions from the fishing industry.

• 한국태양에너지학회 논문집
• /
• 제33권6호
• /
• pp.85-91
• /
• 2013

It is essential to reduce the amount of fossil fuel because facing with the natural problem such as a global warming. To achieve this goal, many of interests in the use of renewable energy is growing. Especially, as one of these renewable energy systems, a solar air heater invention has been conducted for enhancing the efficiency of solar air heater. According to this trend, scale-down sized experiment apparatus was constructed and performed for searching a proper fin and confirming the heat transfer performance by fin shape on constant heat condition to enhance efficiency of solar air heater. In this experiment, heat gain, convection heat transfer coefficient, number of transfer units, Nusselt number, Reynold's number, friction factor, performance factor were investigated in order to evaluate the thermal characteristics based on the real data obtained. By comparison with the each fin performance, a zigzag shape keeping a right angle to the plate had the highest value among them.

• International Journal of Concrete Structures and Materials
• /
• 제9권3호
• /
• pp.295-306
• /
• 2015

Simulating natural leaching process for cementitious materials is essential to perform long-term safety assessments of repositories for nuclear waste. However, the current test methods in literature are time consuming, limited to crushed material and often produce small size samples which are not suitable for further testing. This paper presents the results from the study of the physical (gas permeability as well as chloride diffusion coefficient) and mechanical properties (tensile and compressive strength and elastic modulus) of solid cementitious specimens which have been depleted in calcium by the use of a newly developed method for accelerated calcium leaching of solid specimens of flexible size. The results show that up to 4 times increase in capillary water absorption, 10 times higher gas permeability and at least 3 times higher chloride diffusion rate, is expected due to complete leaching of the Portlandite. This coincides with a 70 % decrease in mechanical strength and more than 40 % decrease in elastic modulus.

• 방사성폐기물학회지
• /
• 제13권4호
• /
• pp.315-319
• /
• 2015

전해환원공정의 금속전환체로부터 우라늄을 회수하는 전해정련공정의 수율을 높이기 위해 고수율 전해정련장치가 개발되었다. 전해정련장치의 수율을 증대시키기 위해서는 고체음극에 전착되는 우라늄 덴드라이트를 음극 표면으로부터 효율적으로 회수할 수 있어야 한다. 철강 재료의 음극을 고체음극으로 사용하면, 우라늄 덴드라이트가 전착되어 쉽게 떨어지고 않고 고착 되어 점착계수(sticking coefficient)가 높아진다. 본 연구에서는 효율적으로 고체음극의 점착계수를 낮출 수 있는 진동 탈리법을 개발하였고 이를 적용하였다. 고체음극에 진동을 가함으로써 고체 표면에서 우라늄 전착물이 흑연음극의 자발특성과 유사하게 효율적으로 탈리됨을 확인하였다. 이러한 진동모드에 의한 고체음극에서의 전착물의 탈리 특성을, 고수율 전해정련장치 개념으로 개발한 흑연음극의 자발탈리 특성과 비교 검토하였다. 그리고 우라늄 덴드라이트의 진동 탈리에 대한 인가전류밀도와 진동 스트로크에 의한 영향 등을 고찰하였다.

• 대한기계학회논문집B
• /
• 제37권3호
• /
• pp.243-248
• /
• 2013

내연기관은 연료로 공급되는 에너지의 30~40%만을 동력에너지로 전환되고 나머지 60~70%는 손실에너지와 배기에너지로 버려지게 된다. 따라서 배기에너지를 회수한다면 기계적 에너지 또는 전기적 에너지로 변환시킬 수 있다. 열전발전기는 배기관에 위치하여 고온 열원과 저온 열원 사이에 온도차를 이용한다. 두 열원 사이에 온도차를 이용하여 전기적 에너지를 발생시켜 동력 에너지 등 여러 에너지로 변환 가능하다. 이 논문에서는 이러한 열전발전기의 특성을 예측하기 위해 수치해석을 통하여 여러 조건에 따른 열전발전기 특성을 예측하였다. 수치해석 결과 고온 열원과 저온 열원 간의 온도 차이가 클수록 발생하는 전력 역시 증가하는 것을 알 수 있었다.

• Current Photovoltaic Research
• /
• 제5권1호
• /
• pp.15-19
• /
• 2017

The fossil fuel power consumption generates $CO_2$, which causes the problems such as global warming. Also, the increase in energy consumption has accelerated the depletion of the fossil fuels, and renewable energy is attracting attention. Among the renewable energies, the solar energy gets a lot of attention as the infinite clean energy source. But, the supply level of solar cell is insignificant due to high cost of generation of electric power in comparison with fossil fuels. Thus several researchers are recently doing the research on ultra-low-cost solar cells. Also, $Cu_2O$ is one of the applied materials as an absorption layer in ultra-low-cost solar cells. Cuprous oxide ($Cu_2O$) is highly desirable semiconductor oxide for use in solar energy conversion due to its direct band gap ($E_g={\sim}2.1eV$) and a high absorption coefficient that absorbs visible light of wavelengths up to 650 nm. In addition, $Cu_2O$ has several advantages such as non-toxicity, low cost and can be prepared with simple and cheap methods on large scale. In this work, we fabricated the $Cu_2O$ thin films by reactive sputtering method. The films were deposited with a Cu target with variable parameters such as substrate temperature, rf-power, and annealing condition. Finally, we confirmed the structural properties of thin films by XRD and SEM.

• 한국산학기술학회논문지
• /
• 제11권2호
• /
• pp.590-596
• /
• 2010

본 연구에서는 디젤대체 연료와 LPG 혼합용 및 도시 가스의 발열량을 높이기 위한 첨가제로 사용할 수 있는 DME 분리공정에 대한 올바른 열역학 모델식의 선정에 대한 해석을 시도하였다. 물과 메탄올 용매 사이의 액상에서의 비이상성을 해석하기 위해서 NRTL 액체 활동도계수 모델식을 사용하였으며, 기상에서 이상기체의 비이상성을 해석하기 위해서 Peng-Robinson 상태방정식을 사용하였다. 한편, Methanol absorber에서 메탄올 수용액 중의 $H_2$, CO, $CO_2$, $H_2$, $CH_4$과 $N_2$ 등과 같은 비응축성 기체의 용해도를 추산하기 위해서 온도와 압력의 함수로 나타낸 Henry parameter를 사용하였다. 사례 연구를 통해서 원료에 대한 용매의 몰 유량비가 3.40일 때 최적이 됨을 알 수 있었다.