• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제20회 춘계학술대회 논문집
• /
• pp.258-261
• /
• 2003

액체로켓 엔진에 사용되는 가스발생기의 최적설계와 연소해석을 수행하였다. 추진제는 RP-1/LOx 이고, open cycle터보펌프 시스템을 사용하였으며, 가스발생기는 농후(fuel-rich)연소를 적용하였다. 최적설계의 목적함수는 주연소실의 비추력이 최대가 되는 것으로 하였다. 설계변수는 가스발생기의 O/F비, 유량(mass flow rate into gas generator), 터빈 노즐 출구 각, 부분분사비, 그리고 터빈 원주속도로서 이들을 이용하여 가스발생기의 열역학적 성능을 계산하였고, 설계제한조건인 가스발생기 연소실 총온도와 터빈-펌프의 출력일치(matching)를 만족하면서 목적함수를 최대화 할 수 있는 가스발생기의 형상과 성능조건을 확인하였다. 연소해석을 통하여 난류고리 장착에 따른 연소가스의 혼합길이와 연소실 직경을 검토하고, 반경방향의 온도분포 등을 살펴보았다.

• 한국연소학회지
• /
• 제20권1호
• /
• pp.32-42
• /
• 2015

The combustion instability was experimentally investigated in model gas turbine combustor with dual swirl burner. When such instability occurs, a strong coupling between pressure oscillation and unsteady heat release excites a self-sustained acoustic wave which results in a loud sound, and can even cause fatal damage to the combustor and entire system. In present study, to understand the combustion instability with a premixed mixture, the detailed periods of pressure and heat release data in unstable flame mode were investigated by various measurement methods at relatively rich condition and lean condition near flammable limits. Also, to prepare the utilization of synthetic natural gas (SNG) fuel in gas turbine system, an investigation was conducted using a simulated SNG including methane as a reference fuel to examine the effects of $H_2$ content on flame stability. These results provide that the instability due to flash-back behaviour like CIVB phenomenon occurred at rich condition, while the repetition of relighting and extinction caused the oscillation of lean condition near flammable limit. From the analysis of $H_2$ content effects, it is also confirmed that the instability frequency is proportional to the laminar burning velocity at both rich and lean condition.

• 한국분무공학회지
• /
• 제14권4호
• /
• pp.171-177
• /
• 2009

This study proposes a new stratified charge system for low emission and ultra lean burn. In order to examine combustion characteristics of the new system, sparkplug with a hole at positive pole and a common CNG injector for injecting fuel were used in this study as injector-type spark plug. The new stratified charge system injects fuel of extremely small quantities and ignites mixture around sparkplug gap. Also, the system was fitted in a visualized constant volume chamber. Then, for analysis of the combustion characteristics, we examined combustion pressure, lean inflammable limit, and visualized combustion flame according to equivalence ratio by comparison with homogeneous charge (HC) method and the new stratified charge (SC) method. As results of this study, in the case of using this system, the propagation speed of initial flame was increased and total combustion period was reduced in the ultra lean burn in the same equivalence ratio. These phenomena occurred clearly under the conditions of lean equivalence ratio. Furthermore, the lean inflammable limit of mixture was extended by using the injector-type spark plug.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.474-478
• /
• 2010

순수 파라핀에 10 wt%의 LDPE를 첨가한 용융성 혼합 연료로 제작한 다이아프램을 장착한 연료를 사용하여 하이브리드 로켓 연소 실험을 수행하였고 다이아프램이 없는 파라핀 연료의 결과와 비교하였다. 용융성 다이아프램을 설치한 경우 강화된 난류와 열전달로 인해 다이어프램 후방의 연료 후퇴율이 크게 증가하였으며 특성속도와 비추력이 증가하였다. 연소 불안정 해석에서는 심각한 연소 불안정이 관찰되지 않았다. 이를 통해 용융성 다이어프램이 용융성 연료를 사용하는 하이브리드 로켓의 낮은 연소 효율 개선에 효과적임을 확인하였다.

• 동력기계공학회지
• /
• 제8권2호
• /
• pp.18-23
• /
• 2004

Recently many researchers have been studying the development of alternative energy due to serious environmental pollution and drying up fossil energy. Among various alternative fuels, authors investigated the physical and combustion characteristics of the bio diesel fuel(BDF) which was made from the wasted vegetable oil. In this study, PXI and LabVIEW, which is a novel measuring instrument and online analysis, was used to investigate the combustion characteristics of BDF in a DI diesel engine.

• 한국수소및신에너지학회논문집
• /
• 제31권4호
• /
• pp.380-386
• /
• 2020

This paper represents an analysis of the economic impact of firing natural gas/diesel and natural gas/by-product oil mixtures in diesel engine power plants. The objects of analysis is a power plant with electricity generation capacity (300 kW). Using performance data of original diesel engines, the fuel consumption characteristics of the duel fuel engines were simulated. Then, economic assessment was carried out using the performance data and the net present value method. A special focus was given to the evaluation of fuel cost saving when firing natural gas/diesel and natural gas/by-product oil mixtures instead of the pure diesel firing case. Analyses were performed by assuming fuel price changes in the market as well as by using current prices. The analysis results showed that co-firing of natural gas/diesel and natural gas/by-product oil would provide considerable fuel cost saving, leading to meaningful economic benefits.

• 한국가스학회지
• /
• 제20권4호
• /
• pp.44-49
• /
• 2016

본 연구는 연소실 형상 변화에 따른 디젤연소와 배출가스의 특성에 대해 살펴보았다. 발전용 커먼레일 디젤엔진의 최적화 설계를 위한 연소실형상을 제시하기 위해 5가지 타입형상을 연비 측면에서 계산하였다. 연소실 형상은 연소 시 분무면적을 변화시킴으로서 연소특성에 영향을 주었으며 이러한 주요요소는 연소실 형상 비였다. 이러한 수치해석의 결과는 연소실 형상의 변화는 발전기의 연비 개선을 가능하도록 한다고 판단되었다.

• 한국자동차공학회논문집
• /
• 제18권5호
• /
• pp.76-84
• /
• 2010

The aim of this study is to analyze the effect of the ethanol blending in diesel-ethanol blended fuels on the spray and combustion characteristics in a common-rail four-cylinder diesel engine. For the analysis of the spray characteristics, the spray images were obtained using a high speed camera with metal-halide lamps. From these spray images, the macroscopic spray characteristics such as the spray tip penetration and spray cone angle were investigated. Also, the combustion characteristics including the combustion pressure and the rate of heat release were studied with the analysis of the exhaust emissions in diesel-ethanol blended fuel driven diesel engine. It can be confirmed from the experiment on spray characteristics of diesel-ethanol blended fuels that the increased ethanol blending ratio induced the decrease of the spray tip penetration after the end of the injection. The spray cone angle slightly increased by the blending of ethanol fuel. In the experiment on atomization characteristics, the ethanol blending caused the improvement of the diesel atomization performance. On the other hand, at the same engine load condition, the increase of the ethanol blending ratio lead to lengthen the ignition delays, and to decrease the peak combustion pressure and the rate of heat release. Totally, the combustion and emission characteristics of ULSD and DE10 showed similar characteristics. However, in the case of DE20, CO and HC rapidly increased, and $NO_x$ decreased. It can be believed that 20% ethanol disturbed the combustion of diesel-ethanol blended fuel due to the low cetane number and evaporation.

• 항공우주기술
• /
• 제12권1호
• /
• pp.200-206
• /
• 2013

액체로켓엔진에서 추진제 밀도와 공급 압력 변화에 대한 성능 민감도를 분석하였다. 해석 프로그램은 터보펌프-가스발생기 연계시험 결과와 비교하여 1% 오차를 가지는 것으로 확인되었다. 연료 공급압력이 증가하면 혼합비 감소로 인해 엔진 연소압이 감소하였고 연료의 밀도가 증가하면 혼합비 감소에도 불구하고 추진제 유량이 증가하므로 엔진 연소압이 증가하는 것으로 예측되었다. 또한 산화제의 밀도가 증가되거나 공급압력이 증가하면 엔진의 연소압이 증가할 것으로 분석되었다.

• 한국자동차공학회논문집
• /
• 제22권7호
• /
• pp.98-106
• /
• 2014

Emission standards for passenger diesel engines are becoming more and more stringent. Especially, Europe started the regulation of nano-particles from 2011 with EURO 5b. The objective of this study is to investigate the effect of fuel injection strategy on combustion and nano-particle emission in a small diesel engine. In this study, we conducted combustion analysis and measured both the weight of PM and number of nano-particels. At first, the optimum injection timing was determined with fixed engine operating conditions, such as engine speed, load, and fuel injection quantity. After that, the injection timing was controlled, and the effect of pilot injection was investigated. The number of nano-particles increased as engine load decreases, and it increased up to 10 times depending on the change of injection timing. The weight of PM emissions was increased at low load, and the PM emissions increased with increasing the number of pilot injections.