• 한국생산제조학회지
• /
• 제22권4호
• /
• pp.686-692
• /
• 2013

Today, environmental issues have become a matter of worldwide concern. In particular, automobile industries engage in considerable research and investment to develop high-efficiency and ecofriendly cars. Most ecofriendly cars use natural gas or hydrogen gas instead of fossil fuels. In this regard, low-weight and high-pressure vessels have gradually been developed to increase the driving distance of a car. However, most pressure vessels installed in cars develop many defects over time owing to shocks sustained when the car is being driven. Such defects can cause the explosion of the pressure vessel. Therefore it is important to prevent such explosions due to internal defects. The use of shearography for measuring the internal defects of objects afford many advantages. It is a non-contact and non-destructive method, and it is not limited by the object shape. In this study, the internal defect deformation and strain of an aluminum liner that is used in a CNG bus for the fuel storage tank is measured using shearography. It is important to measure the strain and deformation in order to detect defects and repair the pressure vessel. To verify the accuracy of the shearography measurement method, the measurement results of shearography, out-of-plane ESPI, and FEM are compared quantitatively.

• 수산해양기술연구
• /
• 제50권4호
• /
• pp.487-494
• /
• 2014

This study describes the result on PV system for evaluating the performance of small fishing boats. Photovoltaic system with 200 watts power generation facilities on the 3-ton fishing boat was carried. Load test was performed on the condition that the work lamps lit during night operations. As a result the performance can be used for more than two hours at 60 watt work lamps. The load test was performed on the condition that fishing vessels are on the cruising condition at sea. The solar power systems have been investigated as a power generation efficiency of about 36.55%. Additional tests show that the power generation efficiency is difficult to expect a maximum of 50% or more. Fuel consumption of fishing boats by installing a solar power system is reduced. Also the PV system is useful for the verification of their availability for fishing vessels as well as the satisfaction of the fishermen. The results for the durability of the photovoltaic device is acceptable, including a solar panel, controller and the performance exhibited no breakage in the harsh marine environment or failure so far. The installed PV system was confirmed that the durability with at least 2 years.

• 대한기계학회논문집B
• /
• 제20권5호
• /
• pp.1591-1602
• /
• 1996

In operating the underwater engines such as encountered in exploring submarines, the dumping of the exhaust gas out of the engine requires a large portion of the total power, frequently amounting to 25-30% of the power generated. This unfavorable circumstance can be cured by liquefying the exhaust gas and storing it. In the present study, two liquefaction systems were simulated to enhance the overall efficiency; one is a closed cycle diesel engine and the other is a closed cycle LNG engine. The liquefied natural gas (LNG) is chosen as a fuel, not only because its use is economical but also because its cold energy can be utilized within the liquefaction system. Since a mixture of oxygen and carbon dioxide is used as an oxidizer, liquefying carbon dioxide is of major concern in this study. For further improving this system, the intercooling of the compressor is devised. The necessary power consumed for the liquefying system is examined in terms of the related properties such as pressure and temperature of the carbon dioxide vessel as a function of the amount of the exhaust gas which enters the compressor. The present study was successful to show that much gain in the power and reduction of the vessel pressure could be achieved in the case of the closed cycle LNG engine. The compression power of exhaust gas were observed remarkably lower, typically only 6.3% for the closed cycle diesel engine and 3.4% for the closed cycle LNG engine respectively, out of net engine power. For practicality, a design -purpose map of the operating parameters of the liquefaction systems was also presented.

• 한국수소및신에너지학회논문집
• /
• 제32권4호
• /
• pp.205-211
• /
• 2021

Recently, it is necessary for study on renewable energy due to environmental pollution and fossil fuel depletion. Therefore, in this study, the filling temperature according to the nozzle geometry was evaluated based on the limit temperature specified in SAEJ2601 for charging hydrogen, a new energy. There are three types of nozzles, normal, angle and round, fixed the average pressure ramp rate at 52.5 MPa/min, and the injection temperature was set at 293.4 K. As a result, the lowest temperature distribution was found in the round type, although the final temperature did not differ significantly in the three types of nozzles. In addition, Pearson's coefficient was calculated to correlate the mass flow rate with the heat transfer rate at the inner liner wall, which resulted in a strong linear relationship of 0.98 or higher.

• Composites Research
• /
• 제34권4호
• /
• pp.257-263
• /
• 2021

복합재료는 높은 비 강성 및 비 강도 특성으로 인해 기체 혹은 액체 연료를 저장하기 위한 압력 용기의 설계 및 제작에 널리 활용되고 있다. 이에 따라, 압력용기의 파열압력 또는 파단 변형률의 기계적 특성의 보다 정확한 측정은 상용화 전에 필수적 요소이다. 그러나, 기존의 시험방법을 활용한 복합재료 압력 용기의 안전성 검증은 하중 전달 매체의 변형으로 인한 추가적인 에너지 손실의 발생과, 불필요한 하중 및 모멘트의 발생 등의 한계가 있다. 따라서 본 연구에서는 수직기둥의 이론적인 하중전달 정도와 적용 가능한 수직방향 변위를 고려하여 세그먼트형 링 버스트 시험장치를 설계하였다. 또한, 세그먼트 형 링 버스트 시험장치의 균일한 압력분포를 검증하기 위해 수치해석을 활용하였고, 수압 시험방법과 링 시편의 원주방향 응력 및 변형률 분포를 비교하였다. 복합재료 압력용기의 파괴 거동을 모사하기 위해 Hashin 파손 기준을 적용하였고, 실험적으로 파단 변형률을 측정하여 이를 수치해석 결과와 비교하였다.

• 해양환경안전학회지
• /
• 제28권7호
• /
• pp.1238-1243
• /
• 2022

국제해사기구(IMO)를 필두로하여 국제적으로 선박에 대한 배출가스 규정을 강화하고 있으며, 대한민국 정부도 온실가스 감축을 위한 기본 로드맵을 설정하는 등 배출가스 저감을 위한 대책 마련이 절실한 상황이다. 또한, 국내 연안을 항해하는 선박에서 배출되는 온실가스 배출량 중 90.6%를 차지하고 있는 어선에 적용가능한 효율적이고 배출가스량이 감소가능한 새로운 추진시스템의 도입이 절실하다. 본 연구에서는 국내 연안어선에 적용가능한 전기복합 추진시스템을 제안하고, 전기복합 추진시스템이 적용가능한 대상선박을 선정하였다. 선정된 기존 대상어선에 탑재된 추진시스템과 비교하여 개발된 전기복합 추진시스템을 적용할 경우 발생할 수 있는 예상 연료소모량을 비교하기 위한 시뮬레이션 시스템을 Matlab/Simulink를 이용하여 구성하였다. 시뮬레이션을 통해 기계식 추진시스템, 전기복합 추진시스템(배터리 육상충전을 하지 않은 경우, 육상충전을 한 경우)간의 연료소모량 결과를 확인하였으며 전기복합 추진시스템을 적용하는 경우 약 13%, 16%의 연료소모량이 감소될 수 있는 것을 보여주는 결과를 확인하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.173.1-173.1
• /
• 2011

The high fuel flexibility of gas turbine power system has boosted their use in a wide variety of applications. Recently, the demand for biogas generated from the digestion of organic wastes and sewage waste water as a fuel for gas turbines has increased. We investigated the performance of high pressure biogas compression system and operating conditions for supplying biogas. The total flow per minute of biogas from food waste water digestion tank is $54Nm^3$. The main type of biogas compression system is the reciprocating system and screw type system. The target of biogas mechanical data is the as belows; inlet pressure 0.045bar, supplying biogas temperature is $30{\sim}60^{\circ}C$, and final pressure is above the 25 bar. Also, inlet conditions of biogas consist of CH4 48.5%~83%, $H_2S$ Max. 500ppm, $NH_3$ Max. 1,500ppm and Siloxane 2.7~4.6ppm. The boosting Blower system raises a pressure from 0.045bar to 1bar before main compressor. The main system lay out of reciprocating consisits of compressor driver, filter, cooling system, blowdown vessel, control system and ESD(Emergency Shut Down) system. And an enclosure package needs to be installed for reducing noise up to 75dB. The system driver is the electronic motor of explosion proof type. Forthe compressor system reliable operation, the cleaning system something like particulate filter needs to be set up in the inlet of compressor and Coalescing Filter in the outlet of compressor. Particulate Filter has to be removed above $10{\mu}m$ size of the particles in biogas. The coalescing filter(Micofine Borosilicate Glass Fibers Filter treated phenol acid) also removes moisture and oil of above $0.3{\mu}m$ to be involved in high pressure biogas up to 90%~98%.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권6호
• /
• pp.788-793
• /
• 2012

본 연구는 해군함정에 탑재되어 있는 주 추진 디젤엔진에서 배출되는 입자상 물질, 황산화물, 이산화탄소 및 질소산화물의 배출량 예측에 초점을 두었다. 국제사회 및 각국의 정부는 인간의 건강 및 환경을 보호하기 위해 선박의 배기가스 규제를 엄격히 적용하고 있으며 선박 제작사들은 이러한 법규에 대응하기 위해 다양한 기술을 선박에 적용시키고 있다. 엄격히 적용되는 배기가스 법규는 선박의 크기에 따라 차이를 보이고 있지만 함정은 규제대상에서 제외된다. 다양한 연구결과에 의해 선박의 배기가스 배출량 계수(emission factor)는 지속적으로 최신화되고 있으나 함정의 배출량 계수는 그 특성의 차이 때문에 설정이 어려운 실정이다. 본 논문은 함정 엔진의 연료소모량과 함정에서 사용하고 있는 연료의 황성분 함량을 분석하여 항해 시 선박에 적용되고 있는 오염물질 기여도 조사(emission inventory) 방법론을 해군함정에 적용시켜 정속항해 조건에서 배기가스 총 배출량을 예측하는 것이다.

• Nuclear Engineering and Technology
• /
• 제20권1호
• /
• pp.19-26
• /
• 1988

저누출 장전 모형은 새 연료를 안에서부터 넣는 in-out 형태를 취하여 격납 용기의 fluence를 줄이고 중성자 경제성을 높이고자 하는 것으로, 이 경우에는 노심내의 전체적인 중성자 경제성은 좋아지지만 노심 중앙부에서의 새연료의 과다 반응도 때문에 안전성 여유를 줄이게 되므로 많은 수의 가연성 독붕봉을 사용하여 첨두 인자를 조절해야만 한다. 본 논문에서는 가연성 독붕봉 연소에 따른 출력 변화를 섭동으로 취급하며, 이를 출력감도 계수(Power Sensitivity Coefficient)로 표시한다. 최적화된 가연성 독붕봉의 분포를 구하기 인하여 알고 있는 주기말상태로부터, 노심 내의 출력과 과다 반응도를 제어하면서 주기초로 추적해 나가는 역연소법(Reverse Depletion Method)의 도입에 대한 타당성을 출력 민감도 계수개념과 선형 계획법을 이용하여 원자력 7호기 제1주기에 응용하여 검증했으며, 가연성 독붕봉의 추정량과 실제량과의 차이는 최대 4.5%의 오차를 보였다.

• Nuclear Engineering and Technology
• /
• 제44권7호
• /
• pp.735-744
• /
• 2012

In order to quantify the flow distribution characteristics of APR+ reactor, a test was performed on a test facility, ACOP ($\underline{A}$PR+ $\underline{C}$ore Flow & $\underline{P}$ressure Test Facility), having a length scale of 1/5 referring to the prototype plant. The major parameters are core inlet flow and outlet pressure distribution and sectional pressure drops along the major flow path inside reactor vessel. To preserve the flow characteristics of prototype plant, the test facility was designed based on a preservation of major flow path geometry. An Euler number is considered as primary dimensionless parameter, which is conserved with a 1/40.9 of Reynolds number scaling ratio. ACOP simplifies each fuel assembly into a hydraulic simulator having the same axial flow resistance and lateral cross flow characteristics. In order to supply boundary condition to estimate thermal margins of the reactor, the distribution of inlet core flow and core exit pressure were measured in each of 257 fuel assembly simulators. In total, 584 points of static pressure and differential pressures were measured with a limited number of differential pressure transmitters by developing a sequential operation system of valves. In the current study, reactor flow characteristics under the balanced four-cold leg flow conditions at each of the cold legs were quantified, which is a part of the test matrix composing the APR+ flow distribution test program. The final identification of the reactor flow distribution was obtained by ensemble averaging 15 independent test data. The details of the design of the test facility, experiment, and data analysis are included in the current paper.