• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 후기학술대회논문집
• /
• pp.9-10
• /
• 2005

A study on the combustion and exhaust emissions characteristics by using Emulsion Fuel in Diesel Engine is performed experimentally. In this paper, the experiments are performed at engine speed 1800rpm, emulsion fuel ratio is 0%, 5%, 10%, 15%, 20%, 25%, and main measured items are specific fuel consumption, NOx and Soot emissions etc. The obtained conclusions are as follows. 1) Specific fuel consumption increase maximum 19.8% at low load, but is not effected at full load. 2) NOx emissions decrease 30% in case of emulsion fuel ratio 25% at full load. 3) Soot emission decrease 58.9% in case of emulsion fuel ratio 25% at full load.

• 대한기계학회논문집A
• /
• 제37권3호
• /
• pp.397-403
• /
• 2013

친환경 및 연비에 대한 요구와 제한은 하이브리드 차량과 같은 친환경 고연비 차량기술을 발전시켜왔다. 하이브리드 차량의 연비는 시스템의 특성으로 인해 주행 후 배터리 충전량의 변화를 연비에 반영시키는 등가연료사용량이 연료소비량에 추가되므로 제어전략에서 배터리 사용영역 증가만으로 연비를 향상시킬 수 없었다. 본 논문은 연료전지 하이브리드 차량을 matlab simulink상에서 모델링하고 기존제어전략에서 연료전지의 사용구간을 분석하여 연료전지 주 사용영역에서의 배터리와 연료전지 간 동력분배를 연비향상을 목표로 최적화하여 등가연료사용량을 포함한 총연비의 향상을 시도하였다.

• Journal of Biosystems Engineering
• /
• 제26권4호
• /
• pp.331-336
• /
• 2001

This study was to develop a kerosene flame weeder. An air compressor was driven though the PTO of a tractor to provide necessary air for fuel combustion and proper pressure to supply fuel from fuel tank to the nozzle. It was found that the flame was extinguished very easily by wind and vibration of the tractor. This trouble could be solved by attaching a burner cap, which is a modified venturi tube, at the end of the nozzle. The constructed flame weeder was tested for the weeding capability in the prepared field. Weed extinction rate and weight decrease rate were analysed. Measured maximum flame temperature was 1,121$\^{C}$ when the fuel consumption was 13.41 kg/h and fuel supply pressure was 88.2 kPa. The maximum temperature occurred at 20cm from the front end the burner, and it decreased to 46$\^{C}$ as the distance increased to 110cm. The flame length of up to 70cm, where the flame temperature was higher than 372$\^{C}$, would be used for weeding purpose. Weed extinction rate and weight decreasing rate increased as the fuel consumption increased. The flame weeder was evaluated to be a practical weeder through improvement as the weed extinction rate and weight decrease rate were analysed to be 75% and 85%, respectively when the fuel consumption was 116.87kg/ha.

• 수산해양기술연구
• /
• 제48권3호
• /
• pp.195-207
• /
• 2012

Fuel consumption in fisheries is a primary concern due to environmental effects and costs to fishermen. Much research has been carried out to reduce the fuel consumption related to fishing operations. The fuel consumption of fishing gear during fishing operation is generally related to hydrodynamic resistance on the gear. This research demonstrates a new approach using numerical methods to reduce fuel consumption. The results from the simulation were verified with results that mirrored the model experiments. By designing the fishing gear using drawing software, the whole and partial resistance force on the gear can be calculated as a result of simulations. The simulation results will suggest suitable materials or gear structure for reducing the hydrodynamic forces on the gear while maintaining the performance of the gear. Furthermore, the efficiency of low energy used trawl as economic point of view will be dealt. This research will helpful to reduce the GHG emissions from fishing operations and lead to reduce fishing costs due to fuel savings.

• 한국생산제조학회지
• /
• 제24권5호
• /
• pp.541-547
• /
• 2015

In this study, the performance of a low-floor midsize bus under development is predicted through simulations. To predict the vehicle's acceleration, maximum speed, and uphill driving performance, a forward simulator which calculates the vehicle power is developed. Also we verify the forward simulator by comparing simulations and test result for benchmarking vehicle. To predict the fuel consumption, we use a backward simulator for a specified road cycle. However, to predict the fuel consumption using the backward simulation the engine fuel-consumption map is needed. The engine fuel-consumption map extracting data from a similar sized diesel engine is used by re-scaling the maximum torque. As a result, we simulate the vehicle's forward performance with a new engine. Further, we simulated the backward performance to optimize the fuel efficiency and gearshift timing.

• 수산해양기술연구
• /
• 제46권4호
• /
• pp.313-323
• /
• 2010

Fuel consumption in fisheries is a primary concern due to environmental effects and costs to fishermen. Much research has been carried out to reduce the fuel consumption related to fishing operations. The fuel consumption of fishing gear during fishing operation is generally related to hydrodynamic resistance on the gear. This research demonstrates a new approach using numerical methods to reduce fuel consumption. By designing the fishing gear using drawing software, the whole and partial resistance force on the gear can be calculated as a result of simulations. The simulation results will suggest suitable materials or gear structure for reducing the hydrodynamic forces on the gear while maintaining the performance of the gear. This research will helpful to reduce the $CO_2$ emissions from fishing operations and lead to reduce fishing costs due to fuel savings.

• 한국자동차공학회논문집
• /
• 제19권5호
• /
• pp.143-147
• /
• 2011

Operating points of a fuel cell system (FCS) can be shifted to its high-efficiency region by hybridization in a fuel cell hybrid vehicle (FCHV), so the hydrogen can be saved. In this paper, the hydrogen consumption of an FCHV is compared to that of a fuel cell vehicle (FCV). A power management strategy is applied to the FCHV and the related simulation is carried out. The concept of equivalent hydrogen consumption is introduced in order to consider the effect of the difference between initial and final battery SOC on the total hydrogen consumption.

• 에너지공학
• /
• 제14권2호
• /
• pp.73-81
• /
• 2005

강판의 냉간압연 후 소둔을 하기 위한 열처리 공정에서 사용되고 있는 Radiant Tube Burner(이하 RT버너) 연비를 개선하기 위한 효율적인 방법을 실험적으로 조사하였다. 재열기가 설치된 모델 RT버너를 실험에 맞도록 개조하여, 배기 중 산소 농도 조건을 변화시키면서 연료 소모에 대한 흡입공기의 온도와 산소분율의 영향도를 파악하였다. 본 연구의 결과, 흡기 온도를 상승시키면 RT버너의 chamber온도가 상승하나 그 상승폭은 흡기 온도 상승폭의 $10\%$에 지나지 많아, 흡입 공기 온도의 상승만으로는 연료 소모 개선을 기대할 수 없다는 것을 알 수 있었다 그러나, 흡입 공기 중 산소분율 변경 실험 결과, 흡입 공기 중의 산소분율을 $1.5\%$증가시키면 NOx의 배출이 약 $40\%$정도 증가하지만 약 $20\%$의 연비 개선 효과를 보였다. 따라서, NOx 배출 증가를 억제하는 산소 고부하 전용 RT버너는 RT버너 시스템의 연료 소모를 개선하는 효과적인 방법의 하나로 기대된다.

• 한국산업융합학회 논문집
• /
• 제7권2호
• /
• pp.153-159
• /
• 2004

The purpose of this research is to investigate the performance of swirl combustion chamber diesel engine by changing the jet passage area, the depth and shape of the piston top cavity (main chamber). The performance of diesel engine with newly changed swirl combustion chamber was tested through the experimental conditions as engine speed, load and injection timing etc. The test results were compared and analyzed. And another purpose of this research is to make a new diesel engine that is satisfied fuel consumption and regulation value of exhaust gas. 1. The rate of fuel consumption was affected significantly by the jet passage area at the high speed and load than low speed and low load. The influence of jet passage large area was proven to decrease the rate of fuel consumption. 2. Smoke was affected significantly by the depth of the piston top cavity, but exhaust temperature and the rate of fuel consumption wasn't affected. The rate of fuel consumption was affected by changing injection timing. 3. The rate of fuel consumption, exhaust temperature and Smoke were affected significantly by the shape of the piston top cavity from rectangular to trapezoid. That is we have all high value. The exhaust smoke density and exhaust gas temperature depended sensitively on variation of the injection timing rather than the shape of the combustion chamber within the experimental conditions. 4. We made a new diesel engine that is satisfied design target values(sfc=190 g/hr, NOx + THC=6.0 g/KWh, PM=0.3 KWh), the rate of fuel consumption and emission standard etc., through changing injection timing at the maximum torque point and rated power point. Although we have a little high NOx value.

• 한국기계기술학회지
• /
• 제13권3호
• /
• pp.17-23
• /
• 2011

To estimate fuel consumption of a vehicle, a car can be tested on chassis dynamometer. In this case, test causes a lot of time and money. To predict the fuel efficiency of vehicles in the design stage or early stage of development, the development of computer simulation model is necessary. Using simulation to predict the fuel consumption, the driving model which consists of time-velocity profile and time-grade profile is necessary In this study, vehicle model is developed in MatLab/simulink to estimate real driving fuel consumption rate with time-velocity profile, time-shift gear profile and time-grade profile. Vehicle model consists of driver model, engine model, power train model, and so on. On-road vehicle tests to verify the vehicle model are carried out for analyzing the result of simulation and comparing with those of the experiments.