• Korean Journal of Materials Research
• /
• v.27 no.2
• /
• pp.107-112
• /
• 2017

The BCBJ (Back Contact and Back Junction) or back-lit solar cell design eliminates shading loss by placing the pn junction and metal electrode contacts all on one side that faces away from the sun. However, as the electron-hole generation sites now are located very far from the pn junction, loss by minority-carrier recombination can be a significant issue. Utilizing Medici, a 2-dimensional semiconductor device simulation tool, the interdependency between the substrate thickness and the minority-carrier recombination lifetime was studied in terms of how these factors affect the solar cell power output. Qualitatively speaking, the results indicate that a very high quality substrate with a long recombination lifetime is needed to maintain the maximum power generation. The quantitative value of the recombination lifetime of minority-carriers, i.e., electrons in p-type substrates, required in the BCBJ cell is about one order of magnitude longer than that in the front-lit cell, i.e., $5{\times}10^{-4}sec$ vs. $5{\times}10^{-5}sec$. Regardless of substrate thickness up to $150{\mu}m$, the power output in the BCBJ cell stays at nearly the maximum value of about $1.8{\times}10^{-2}W{\cdot}cm^{-2}$, or $18mW{\cdot}cm^{-2}$, as long as the recombination lifetime is $5{\times}10^{-4}s$ or longer. The output power, however, declines steeply to as low as $10mW{\cdot}cm^{-2}$ when the recombination lifetime becomes significantly shorter than $5{\times}10^{-4}sec$. Substrate thinning is found to be not as effective as in the front-lit case in stemming the decline in the output power. In view of these results, for BCBJ applications, the substrate needs to be only mono-crystalline Si of very high quality. This bars the use of poly-crystalline Si, which is gaining wider acceptance in standard front-lit solar cells.

• Journal of architectural history
• /
• v.28 no.3
• /
• pp.7-18
• /
• 2019

This study analyzed "Bukgwol Dohyeong (Drawing Plans for the Northern Section of Gyeongbokgung Palace)", which is an important source material for the restoration of the palace, by applying Paltaekron, the geomantic principle of bearings, in order to clarify the building layout principle of Gyeongbokgung Palace. Gyeongbokgung Palace shows the typical geographical conditions that meet the principle of Baesan Imsu (mountain in the back and water in the front) which takes Baegaksan Mountain as the main mountain and the overall layout of the buildings that meet the principle of 'Jeonchak Hugwan (narrow in the front and broad toward inside)' by using the natural topography that meets the principle of 'Jeonjeo Hugo (low in the front and higher toward back).' It is estimated that this layout and arrangement must have been led by geomantic principle of bearings. The analysis of the building layout plan of Gyeongbokgung Palace in the late Joseon Dynasty Period suggests the application of two methods: one is to divide central area from Gwanghwamun Gate to Geoncheongung Hall into eight layers and the other is to apply the bearings of the Eight Trigrams based on the building that becomes the center. As a result, the gate, main hall, and kitchen of all major buildings where the royal family lived are located in the auspicious bearings according to the geomantic principle of bearings while the spaces where people other than the royal family such as those who served the royal family and the officials operated in the palace or the hall that enshrines the ancestors such as Taewonjeong Hall are located in the ominous bearings. Therefore, the buildings of Gyeongbokgung Palace are arranged based on the geomantic principle of bearings.

• Animal Bioscience
• /
• v.37 no.4
• /
• pp.555-566
• /
• 2024

Objective: This study aimed to assess the genetic parameters and accuracy of genomic predictions for twenty-four linear body conformation traits and overall conformation scores in Korean Holstein dairy cows. Methods: A dataset of 2,206 Korean Holsteins was collected, and genotyping was performed using the Illumina Bovine 50K single nucleotide polymorphism (SNP) chip. The traits investigated included body traits (stature, height at front end, chest width, body depth, angularity, body condition score, and locomotion), rump traits (rump angle, rump width, and loin strength), feet and leg traits (rear leg set, rear leg rear view, foot angle, heel depth, and bone quality), udder traits (udder depth, udder texture, udder support, fore udder attachment, front teat placement, front teat length, rear udder height, rear udder width, and rear teat placement), and overall conformation score. Accuracy of genomic predictions was assessed using the single-trait animal model genomic best linear unbiased prediction method implemented in the ASReml-SA v4.2 software. Results: Heritability estimates ranged from 0.10 to 0.50 for body traits, 0.21 to 0.35 for rump traits, 0.13 to 0.29 for feet and leg traits, and 0.05 to 0.46 for udder traits. Rump traits exhibited the highest average heritability (0.29), while feet and leg traits had the lowest estimates (0.21). Accuracy of genomic predictions varied among the twenty-four linear body conformation traits, ranging from 0.26 to 0.49. The heritability and prediction accuracy of genomic estimated breeding value (GEBV) for the overall conformation score were 0.45 and 0.46, respectively. The GEBVs for body conformation traits in Korean Holstein cows had low accuracy, falling below the 50% threshold. Conclusion: The limited response to selection for body conformation traits in Korean Holsteins may be attributed to both the low heritability of these traits and the lower accuracy estimates for GEBVs. Further research is needed to enhance the accuracy of GEBVs and improve the selection response for these traits.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.36 no.3
• /
• pp.227-231
• /
• 2010

Among various make-up products, foundations are widely used to express clear and flawless skin. Foundations can be classified by its formula to 3 types, liquid foundation, powder foundation, and oil dispersion foundation. Powder foundations are easy to carry and use, so it is commonly possessed. In the R&D point of view, the developing method of powder foundations can be classified again to 3 types. Dry-process, baked-process, and the wet slurry-process. The fact that the wet slurry-process goes through either the back injection method or the front injection method is previously known. The front injection process is used as the main method in this study. We observed the quality dependence on the kind of solvent and the powder coating system. In brief, when water was used as the main solvent, the hardness increased than when volatile silicones or hydrocarbons were used. And the sensory results were shown to prefer volatile solvents (silicones or hydrocarbons) over water. Similarly, when the amino acid-coating system was applied, the hardness was shown to increase, when silicone-coating system shown no specific change. By these results, tailor-made powder foundations targeting specific customer grades can be easily produced.

• Fashion & Textile Research Journal
• /
• v.7 no.2
• /
• pp.203-210
• /
• 2005

The purpose of this study is to classify the body types based on the side view. The subjects are 404 Korean and Mongolian women within the 18 to 24 age group. From the results of comparing 28 items of indirect photometric measurements, 15 items were shown to have significant differences. Mongolian women were larger in values for 13 items than were Korean women except two items, which are back projecting point height and abdominal projecting point height. The silhouette of Korean women's front body looks completely different from Mongolian women's. Especially, Mongolian women's fore-breast part is much thicker than that of Korean women. The result of analysing the indirect photometric measurement of 4 types which were previously classified by the direct measurements and index values is as follows; Type 1 is normal type, type 2 is lordosis type, type 3 is swayback type, and finally type 4 is flatback type. The groups of each of the 4 types are further divided into Korean and Mongolian women. Judging from their body types based on the side view, it seems clear that significant differences exist between Korean and Mongolian women's side body shapes in the thickness of their breast part.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.3 no.2
• /
• pp.1-9
• /
• 2000

Recently, the number of unsold apartments has been increasing, and apartment furnishing companies have tried a marketing strategy by utilizing the outdoor space for differentiation. There are many differentiation strategies. One of them is to improve the dwellings-on-ground space in apartment complex. Owing to the high density and high-rise of apartment buildings, the dwellings-on-ground apartment complex have been recognized as not good housing by residents in korea. The precedent study on the responses from residents showed the negative effects mainly due to sunlight, daylight, view and privacy and the positive effects from good accessibility and good environment for children and elderly people. The purpose of this study was to improve the dwellings-on-ground space and to suggest the most appropriate type of the dwellings-on-ground space through the residents' desires and preferences. In this point of view, this study shows three results for the design improvement: 1) Providing private gardens and individual accesses to the dwellings-on-ground. 2) Providing private garden with flower bed to intensify the visual aspect. 3) Furnishing variable transformation of unit plan in dwellings-on-ground, for example, maisonette, etc.

• Korean Journal of Optics and Photonics
• /
• v.7 no.3
• /
• pp.183-190
• /
• 1996

To design three-mirror telescope system (F/8, 120 inch in focal length) for visible and infra-red band imaging, methods for power configuring and correction of the third order aberrations were studied. In the design of the telescope system, a three-mirror system corrected for spherical aberration, coma, and astigmatism was used for infra-red imaging, and the aberrations were corrected by using conic surfaces. For visible imaging, a singlet corrector lens was appended at the front of the focal plane to correct filed curvature. The telescope system has diffraction limited performance for 10 ${\mu}{\textrm}{m}$ in wavelength within 2.4$^{\circ}$ of field-of-view. In the visible band imaging, the rms spot size of the telescope system is less than 25 ${\mu}{\textrm}{m}$ within 3$^{\circ}$ of field-of-view for monochromatic light, and the telescope system satisfies flat field condition for CCD application.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.6
• /
• pp.1027-1039
• /
• 1995

Clothing fitness is strongly required in the apparel industry, and draping is an effective tool to increase fitness to the wearers. A more sophisticated and systematic information of the somatotype, accordingly, is necessary for better cress form design. This study was performed to provide fundamental data on middle aged women's upper torso for dress form designers and pattern makers by classifying the somatotype based on each individual's lateral view, and analyzing the characteristics of their somatotype. Data were analyzed by factor analysis, cluster analysis, analysis of variance. Factor analysis was used to 23 items from photometric measurment and cluster analysis was applied for classification of upper torso forms. Through cluster analysis using 5 factor scores, 3 somatotypes were categorized from th lateral view 1) Type I was straight somatotype in which the plumb line passes throught the lobe of the ear, the shoulder joing and the mid abdominal region laterally. This type of woman was slender and shorter than average. 2) Type II was bending somatotype in which the upper portion of upper torso is bent forward. This type of woman was taller and fatter than average. 3) Type III was swayback somatotype in which the upper portion of protruding point on the back is bent forward but the lower portion of protruding point had characteristic of turning over somatotype. This type of woman had storter length on the front and longer lenght on the back, slender type and flat chest.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.145-147
• /
• 2009

This research measures EEG signals which are generating on head skin and extracts brain concentration level related with brain activity. We have developed concentration wireless transmission system by displaying this EEG signal on PDA mobile device. The front head was used for measuring EEG signal and INA128 with TL084 and analog elements was used for measuring EEG signal, amplifying and filtering the signal. Measured analog EEG signals changed into digital signals by using ADC of PIC24FJ192 with 10bit resolution and 500Ks/s sampling rate. So The changed digital signals have transmitted to the PDA by using bluetooth. LabView 8.5 was also used for FFT transformation, frequency and spectrum analysis of the transferred EEG signal. As a result, $\alpha$ wave, $\beta$ wave, $\theta$ wave and $\delta$ wave were classified. we extracted the concentration index by adapting concentration extraction algorithm. This concentration index was transferred into PDA by wireless module and displaying.

• Korean Journal of Optics and Photonics
• /
• v.28 no.6
• /
• pp.263-272
• /
• 2017

To design a wide-field optical system, the inverted telephoto configuration, which has a negative front group and a positive rear group, is popular. For a two-mirror system, the inverse Cassegrain system has the inverted telephoto configuration, but the inverse Cassegrain system with the conventional, axially symmetric configuration shows severe field screening and ray obstruction. To avoid these problems, we put the aperture stop on the secondary mirror of an inverse Cassegrain system to increase field of view, and designed a wide-field off-axis two-mirror system which only uses the off-axis field, without ray obstruction.