• Journal of the Korean housing association
• /
• v.10 no.1
• /
• pp.51-61
• /
• 1999

Small apartment housings in Korea are dissatisfied due to the growing areas and changing lifestyle of the residents. Many of them currently confronted with slum areas and kinds of housing stock accumulated much more in Korean contexts. An extention of the existing small houses could be an adaptation model to the increasing requirement standards of the house residents. The new model could support diverse identification of the dwelling model in a settlement and many residents could be satisfied with the settlement. This paper deals with the unification typology of two dwelling units to one in order to remodel existing small apartment houses on the 15-pyung areas (N type) constructed by Korea National Housing Corporation in Naju. The proposed type of the merging of the dwellings remove concrete panel walls, make a path through balcony and attach a living areas to the front of the houses in order to make a circulation between the dwellings. A stair hall can be located in-between or inside the merged houses. It can also enhance privacy against conflictive activities in a house and possibly provide space appropriate for three-generation living. It can be devided for the multi-family use. Finally, the merging types of two dwelling units into one can be used as a device to get rid of the monotonous characteristics and gain diversity in the declining stock housing.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.91-94
• /
• 2006

In this paper, in order to get micro or nano size optical patterns, an analytical and experimental investigation on a LGP (light guide plate) injection molding process has performed. The LGP, which diffusing and emitting the light from the CCFL or the LEDs to the panel front direction uniformly, typically has an under 1mm thick base substrate and numerous 60 to $170{\mu}m$ width and 6 to $10{\mu}m$ thick dot patterns on it. Generally, the small size LGPs, for mobile devices, have been and are being made of PMMA through the injection molding process. However, the substrate thickness and the dot pattern size are decreasing, it becomes hard to fill the micro to sub-micro cavities completely. To investigate the flow behavior of resin in micro/nano cavities and identify the characteristics of the LGP injection molding process, we carried out the flow analyses with respect to the variations of the substrate thickness, the dot pattern size and the pitch of a cavity.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.734-738
• /
• 2003

The addressing time should be reduced by modifying cell and/or driving method in order to replace the dual scan system by single scan and increase the luminance in large ac plasma display panel(PDP). In this paper, the relationships between of discharge cell structure and addressing time in ac PDP are investigated. It is found out that the addressing time was decreased with decreasing gap of ITO electrode and thickness of transparence dielectric layer on the front glass. The decrease rates were 4% per $10{\mu}m$ and 4% per $5{\mu}m$, respectively. Also in cases of decreasing height of barrier rip and thickness of white dielectric layer on the rear glass, addressing times were at the rate of 4% per $10{\mu}m$ and 4% per $2{\mu}m$, respectively.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.113-115
• /
• 2003

Droplet impinging into a cavity at micro-scale is one of important fluidic issues for microfabrications, e.g. bio-chip applications and inkjet deposition processes in the PLED panel manufacturing. The droplets generally dispensing from an inkjet head, which contains an array of nozzles, have a volume in several picoliters, while each nozzle jets the droplets into cavities with micron-meter size located on substrates. Due to measurement difficulties at micro-scale, the numerical simulation could serve as an efficient and preliminary way to evaluate the micro-sized droplet impinging behavior into a cavity. The micro-fluidic flow is computed by solving the three-dimensional Navier-Stokes equations through a finite volume discretization. The droplet front is predicted by a volume-of-fluid approach, in which the surface tension is modeled as a function of the fluid concentration. This paper discusses the influence of fluid properties, such as surface tension and fluid viscosity, on micro-fluidic characteristics at different jetting speeds in the deposition process via the proposed numerical approach.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.6
• /
• pp.1034-1040
• /
• 2003

Tension mask is a part of CRT type devices, which is installed right behind glass-made front panel. Numerous slits on the thin metal sheet enable the electron beams emitted from posterior gun to be focused, resulting in enhanced definition. Flattened and enlarged displays necessitate the imposition of pretension on the masks, in order to improve the robustness of display quality against vibration or impact. High temperature assembly process subsequent to pretensioning, however, degenerates creep resistance of mask material, and common mask may become susceptible to undesirable elongation due to creep. Once tensile stress becomes high enough to induce creep deformation, pretension is substantially loosened. In this study, tension mask assembly is modeled as a combined structure of beams and wire array, and a numerical simulation is attempted for pretensioning followed by high temperature process. Based on a model study, creep occurrence is found to be probable and its adverse influence is quantified. As fur maintaining high tensile force, simply increasing pretension does not seem to be helpful. Instead, the structure of frame needs to be modified somehow, or material for mask needs to be selected properly.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.4 s.247
• /
• pp.306-313
• /
• 2006

Automated material handling system is being used as a method to reduce manufacturing cost in the semiconductor and flat panel displays (FPDs) manufacturing process. Those are considering switch-over from the traditional cassette system to single-substrate transfer system to reduce raw materials of stocks in the processing line. In the present study, the wafer transportation speed has been evaluated by numerical and experimental method for three propulsion nozzle array (face, front, rear) in an air levitation system. Test facility for 300 mm wafer was equipped with two control tracks and a transfer track of 1,500mm length. The diameter of propulsion nozzle is 0.8mm and air velocity of wafer propulsion is $50\sim150m/s$. We found that the experimental results of the wafer transportation speed were well agreed with the numerical ones. Namely, the predicted values of the maximum wafer transportation speed are higher than those values of experimental data by 16% and the numerical result of the mean wafer transportation speed is higher than the experimental result within 20%.

• Journal of the Korean Society of Costume
• /
• v.65 no.7
• /
• pp.60-74
• /
• 2015

It is considered that jacket was widespread in the 19th century due to its simple and convenient production technique. This study aims to explore the western women's jacket in the late 19th century, which is the basis of modern women's outwear, and we focused on the patterns and construction, the technical aspect of the jacket. We researched pattern books and preserved costume materials, and the study methods are as follows: First, we analyzed the pattern of the jackets from the pattern books and preserved costumes. Second, we analyzed the construction of the jackets from the preserved costumes and compared it to previous researches. The study results are as follows: 19th century jacket consisted of a bodice, a back bodice, a side panel, two-piece sleeve and a collar. The front bodice had cuttings and a dart to make the jacket fit the shape of the body and the two-pieced leg of mutton sleeve, puffed at the shoulder. Various styles of collar and neckline existed. The pattern suggested diverse ways of designing a jacket, such as cutting with partition, dart and pattern expansion that focused on three-dimensional effect at that time.

• The Research Journal of the Costume Culture
• /
• v.11 no.4
• /
• pp.562-577
• /
• 2003

The object of my research is to inquiry into the immediate constituent and techniques of underwear after looking into basic theory of underwear, techniques by materials classified according to the matter of elasticity, and studying flat pattern and draping which are basis of corset and brassiere structure focusing on corsetry among underwears and production techniques. Various papers are referenced for theoretical study and the elements and techniques of underwear are analyzed based on photographical materials. This paper concludes as follows. To make the flat pattern of corset and brassiere fit to the body tightly, design dart two times without any space and draw smaller than the body. To support the breast sufficiently, move the side seam 1¼″ to the front panel and the seam should pass the apex in all occasions. For draping, dart should be added into short of elasticity materials in the past but dart is no use these days since the material today is extremely elastic. It is possible now to show the body line with only the seam or a pattern. In a case of elastic material, set the elastic direction to the grain line and have a draping as pulling from the center to the out side. As production technic, for an hem, put a zigzag stitch in elastic materials with a 10-20% short elastic band, pulling the band. Then make 3/16″-1/4″ short inseam.

• Journal of KIISE:Software and Applications
• /
• v.34 no.5
• /
• pp.447-454
• /
• 2007

TFT-LCD(Thin Film transistor liquid crystal display) has become actively used front panel display technology with increasing market. Intrinsically there is region of non uniformity with low contrast that to human eye is perceived as defect. As the gray level difference between the defect and the background is hardly distinguishable, conventional thresholding and edge detection techniques cannot be applied to detect the defect. Between the patterned and un-patterned LCD defects, this paper deals with un-patterned LCD defects by using independent component analysis, adaptive thresholding and skewness. Our method showed strong results even on noised LCD images and worked successfully on the manufacturing line.

• Journal of Fashion Business
• /
• v.12 no.6
• /
• pp.81-92
• /
• 2008

The purpose of this study is to develop the applied brassiere pattern of women which are fitting for 75A. The constructing of this experimental brassiere were lower cup, upper cup, front panel and U-wing as well as a full cup embcing the entire breasts. Basing on the bra model from domestic experiment results, development of an applied design, round side type pattern, has been suggested. Thus, suggesting the round variation design bra, which is an applied design based on the basic model based on the breast volume. Based on the sizes that are in reference to Size Korea (2004) and related previous researches, the basic model that has been experimented with 11.4% polyurethane and 88.6% Nylon as the materials, has been selected as the model of research. This takes 75A, the size of which is set according to the underbust circumference and the breasts circumference, as the basic model. It is an application in terms of design, and there is no change to the cup volume or size because it has been moved only from the cutting line. The applied design changes the right side of the lower cup into an easily-movable form and attaches it to the upper cup, and the lower cup takes the right part of the upper cup to form a cup shape of round variation design. It also changes basic straight form of the wings, and alters them into U-shape.