• Journal of Wetlands Research
• /
• v.19 no.4
• /
• pp.383-392
• /
• 2017

In 2013, August and September(early) as summer and October and November as Fall the probe of eutrophication has been done at 22 sampling points from the entrance of Danghang Bay (Jinhae Bay) to Geosan reservoir. In Danghang Bay, total chlorophyll(TChl) concentration of summer was 3.7 times higher than that of fall, and sampling points closer to the center showed 1.8 times higher concentrations than sampling points near the fringe where fresh water encountered. Eutrophication Index(EI) exceeded 1 at all sampling points in Danghang Bay during summer and fall, and if other conditions for algae growth met there was a possibility red tide to bloom at any place. There was a tendency of EI to gradually increase moving up from the entrance of bay to the inner side during summer and fall. Especially there was a sudden increase by 2.3 times higher at sampling points of 13~22 (planned region as Madong reservoir) than at other points during fall. Nitrogen was a limiting nutrient for growth of algae during summer and fall in Danghang Bay, but phosphorus was a limiting nutrient during summer rainy season. During summer and fall, multiple linear regression analysis between EI and COD, DIN, and DIP showed a significant positive relationship and that DIP was the most effective variable. Whereas multiple linear regression analysis between TChl and COD, DIN, DIP, and DSi showed a significant positive relationship and that DIP was also the most effective variable during summer. There was no significant correlation between TChl and the other parameters during fall.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.1
• /
• pp.121-126
• /
• 2013

Background: Significance of HPV infection and genic mutation of APC and K-ras in rectal cancer has been investigated but not clarified. The objective of our study was to investigate these parameters in patients with rectal cancer to analyze correlations with biological behaviour, to determine relationships among the three, and also to demonstrate survival prognosis effects. Methods: From December 2007 to September 2008, 75 rectal cancer cases confirmed by histopathology in the Tumor Hospital of Xinjiang Medical University were enrolled. The control group consisted of normal rectal mucous membrane taken simultaneously, a least 10 cm distant from the carcinoma fringe. HPV DNA, the MCR of APC and exon-1 of K-ras were detected by PCR and PCR-SSCP. All results were analyzed in relation to clinical pathological material, using chi-square and correlation analysis via SPSS.13 and Fisher's Exact Probability via STATA. 9.0. All 75 patients were followed up for survival analysis using Kaplan-Meier and Log-rank tests. Results: 55 out of 75 cases demonstrated gene HPV L1 while it was notdetected in normal rectal mucosa tissue. HPV infection was correlated with age and lymphatic metastasis (P<0.05) but not other characteristics, such as ethnicity, tumor size, histological type, tumor type, Duke's stage and infiltration depth. Some 43 cases exhibited APC genic mutation (57.3%) and 34 K-ras genic mutation (45.3%). APC genic mutation was correlated with gender(P<0.05), but not age, histological type, infiltration depth, lymphatic metastasis and Duke's stage. In 55 cases of rectal cancer with HPV infection, there were 31 cases with genic mutation of APC (56.4%) and 24 with genic mutation of K-ras (43.6%). For the 20 cases of rectal cancer with non-HPV infection, the figures were 12 cases (60%) and 10 (50.0%), respectively, with no significant relation. Survival analysis showed no statistical significance for K-ras genic mutation, APC genic mutation or HPV infection (P>0.05). However, the survival time of the patients with HPV infection was a little shorter than in cases without HPV infection. Conclusions: Our results suggest that HPV infection might be an important factor to bring about malignant phenotype of rectal cancer and influence prognosis. Genic mutation of APC and K-ras might be common early molecular events of rectal cancer, but without prognostic effects on medium-term or early stage patients with rectal cancer.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.1
• /
• pp.12-29
• /
• 2016

The purpose of this study was to improve forestland characteristic evaluation system's indicators for rational development and ecosystem conservation. There has been no consideration for statistical duplication between variables, and it caused inefficient data collection. Furthermore, the same evaluation criteria were applied for all forestlands without considering regionally different characteristics, and it made variation for designation cancel rates of preservation semi-preservation forestlands between cities. To solve these problems, we first removed 'DBH' variable which has a multicollinearity. Second, we applied standard normal distribution for each forest watershed type. As a result of eliminating 'DBH', the numbers of parcels for all grades except A were changed but their numbers and areas were not large enough to consider the change of total score. For the output of analyses with the existing same regional criteria, the total scores of urban type and urban-fringe type forestlands were higher than those of other types. The numbers of parcels for A and B were increased and those for C and E were decreased by applying standard normal distribution. This caused the increase of preservation-oriented parcels. Finally, we suggested a new evaluation method based on standard normal distribution to consider regional forest characteristics and to solve regional imbalance.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.4
• /
• pp.112-128
• /
• 2014

This study aims to analyse the variation of spatial accessibility pattern based on 2SFCA(2 Step Floating Catchment Area) by changing its parameter values. The general pattern of the result of 2SFCA analysis shows that the spatial accessibility value is decreased by growing base population, while the spatial accessibility value is increased by growing PPR(Provider to Population Ratio). The three characteristics of local pattern in the Gumi City are founded by cluster analysis on the sensitive analysis procedure. Firstly, the variation of the accessibility values is insignificant in the fringe area of the Gumi City. Secondly, the variation of the accessibility values is diverse in the surrounding area of the welfare facilities. Especially, Dong areas are more sensitive to PPR variation, while others are more sensitive to base population variation. Thirdly, the larger parameter values, the more the spatial accessibility of the central areas, where elder people can access welfare facilities more easily, is improved. It needs to choose parameter values with caution to analyse spatial accessibility based on 2SFCA.

• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.2
• /
• pp.17-27
• /
• 2011

This paper describes an experimental study and finite element analysis (FEA) carried out for investigating thermal deformation behavior of solders, resulting from temperature change in the solder. With such a goal in mind, a shear specimen that was composed of two metal bars having different coefficient of thermal expansion and solder blocks placed between two bars was designed and fabricated. Two different types of solder blocks, eutectic solder (Sn/36Pb/ 2Ag) and lead-free solder (Sn/3.0Ag/0.5Cu) were tested as well. Fringe patterns for several temperature steps were recorded and analyzed for three temperature cycles using a real-time moir$\acute{e}$ setup. The experimental data was verified with FEA and used to evaluate the suitability for numerous solder constitutive models available in literatures. FEA employing Anand material model suggested by Darveaux et al. and Chang et al. were found to be in an excellent agreement with the experimental results for the eutectic solder and the lead-free solder, respectively. In addition, numerical predictions on bending displacement, shear strain and viscoplastic distortion energy are documented and viscoplastic deformation behavior of two types of solder material are compared.

• Korean Journal of Social Welfare
• /
• v.69 no.1
• /
• pp.33-57
• /
• 2017

This study examines the effect of working conditions for care workers on the care quality in long-term care facilities, particularly the coexisting perspective on publicness and the marketization of Long-term care services in South Korea brings about. Prior studies have not identified a causal relationship between working conditions and the care quality, only explained cause of a low-wage labor market and low productivity of social services. Theoretical relevance of working conditions and service quality on Long-term care in Korea is to view from a integrated care model by Daly and Lewis(2002). A nonproportional stratified sampling procedure was used to consider Long-term care facility's ownership. A merged dataset combining surveys from 248 Long-Term Care facilities and online resources from NHIC administrative was used and analyzed by multiple regression. The analysis results is showed as follows. Overall, organizations with better working conditions, having higher wage, having greater a fringe benefit, being skills development and training are likely to have good care quality in each area. This research shows that the working conditions, rewards and support to care workers of organizational culture in the normative dimension beyond the minimum standard on labor market policy and evaluation system by government regulations have a positive impact on Long-term care quality.

• Journal of the Economic Geographical Society of Korea
• /
• v.18 no.1
• /
• pp.45-59
• /
• 2015

The urban-rural consolidated city has emerged in order to promote the balanced development of urban region and rural region. Targeted 11 urban-rural consolidated cities in Gyeonggi Province, this paper investigated the changes of economic space in accordance with the location of industrial activities. The number of establishments has increased in all cities. From the analysis of the changes in the economic space divided into urban regions and rural regions, concentration phenomenon of economic activities in urban regions was strengthened in 9 cities with the exception of Icheon-si and Anseong-si. Concentration of economic activities in urban region was noticeable in Namyangju-si, Pocheon-si, and Yongin-si. 5 types were derived from the classification on the basis of locational changes of economic activities in urban region and rural region. They are 1) urban-rural gap deepen type, 2) urban region growth slowdown type, 3) rural region growth type, 4) urban-rural balanced growth type, and 5) urban region-led growth type. While urban-rural gap of the cities close to highly urbanized city or metropolis has intensified, the growth of urban region was weakened in the cities located away from the metropolis.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.1
• /
• pp.50-64
• /
• 2009

The freshwater lakes located at the fringe of urban cities are a habitat for diverse organisms. However, they are facing severe danger of environment deterioration and water pollution caused by reckless development of the area. In this study, an ecological management plan was suggested to promote the biodiversity through appointing management area based on the research and analysis data of flora and fauna as well as maintain biodiversity and harmonize utilization of freshwater lakes such as Duryang Reservoir at Sacheon, Gyeongsangnam-do. Base on the data of ecological research and analysis, this study conducted research on biotope assessment, wild life habitat assessment and presence of protected species. As a result, the ecosystem conservation area including multi-layer structured natural forests, waterside and wetland that are home to various species and the edge area with high habitat diversity were recognized as highly preservable regions. Management areas were ecologically disturbed region, highly polluted commercial district and damaged waterside caused by fishing. Proactive management must be implemented through vegetation management such as vegetation transition and shrub planting as well as establishing pollutant management system. The deterioration of waterside and forest vegetation of freshwater lake has a direct influence on biodiversity and water quality. Therefore, the conservation area and development area should be totally separated from each other, and the development area must be restored and managed strictly.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.4
• /
• pp.425-442
• /
• 2004

Statement of problem: A difficulty in achieving a passive-fitting prosthesis can be overcome by individual crown restoation of multiple implants. But individualized crown has another difficulty in control of contact tightness and stress distribution. Purpose: This in vitro study is to evaluate the stress distribution and the magnitude in the supporting tissues around Endopore implants with different crown lengths, interproximal contact tightness, and the splinting effects. Material & methods: Three Endopore implants($4.1{\times}9mm$) were placed in the mandibular posterior edentulous area distal to the canine and photoelastic model was made with PL-2 resin(Measurements Group, Raleigh, USA). Restorations were fabricated in two crown lengths: 9, 13 mm. For non-splinted restorations, individual crowns were fabricated on three custom-milled titanium abutments. After the units were cemented, 4 levels of interproximal contact tightness were evaluated: open, ideal($8{\mu}m$ shim stock drags without tearing), medium($40{\mu}m$), and heavy($80{\mu}m$). For splinted restorations, 3-unit fixed partial dentures were fabricated. This study was examined under simulated non-loaded and loaded conditions(6.8 kg). Photoelastic stress analysis was carried out to measure the fringe order around the implant supporting structure. Results: 1. When restorations were not splinted, the more interproximal contact tightness was increased among the three implants, the more stress was shown in the cervical region of each implant. When crown length was increased, stresses tended to increase in the apex of implants but there were little differences in stress fringes. 2. When nonsplinted restorations were loaded on the first or third implant, stresses were increased in the apex and cervical region of loaded implant. Regardless of interproximal contact tightness level, stresses were not distributed among the three implants. But with tighter interproximal contact, stresses were increased in the cervical region of loaded first or third implant. 3. When the nonsplinted restorations were not loaded, there were little stresses on the supporting structure of implants, but low level stresses were shown in the splinted restorations even after sectioning and soldering. 4. With splinted restorations, there were little differences in stresses between different crown lengths. When splinted restorations were loaded, stresses were increased slightly on the loaded implant, but relatively even stress distribution occurred among the three implants. Conclusions: Splinting the crowns of adjacent implants is recommended for Endopore implants under the overloading situation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.4
• /
• pp.397-411
• /
• 2004

Purpose: The purpose of this study was to determine the effect of anchorage systems and palatal coverage of denture base on load transfer in maxillary implant-supported overdenture. Material and methods: Maxillary implant -supported overdentures in which 4 implants were placed in the anterior region of edentulous maxilla were fabricated, and stress distribution patterns in implant supporting bone in the case of unilateral vertical loading on maxillary right first molar were compared with each other depending on various types of anchorage system and palatal coverage extent of denture base using three-dimensional photoelastic stress analysis. Two photoelastic overdenture models were fabricated in each anchorage system to compare with the palatal coverage extent of denture base, as a result we got eight models : Hader bar using clips(type 1), cantilevered Hader bar using clips(type 2), Hader bar using clip and ERA attachments(type 3), cantilevered milled-bar using swivel-latchs and frictional pins(type 4). Result: 1. In all experimental models, the highest stress was concentrated on the most distal implant supporting bone on loaded side. 2. In every experimental models with or without palatal coverage of denture base, maximum fringe orders on the distal ipsilateral implant supporting bone in an ascending order is as follows; type 3, type 1, type 4, and type 2. 3. Each implants showed compressive stresses in all experimental models with palatal coverage of denture base, but in the case of those without palatal coverage of denture base, tensile stresses were observed in the distal contralateral implant supporting bone. 4. In all anchorage system without palatal coverage of denture base, higher stresses were concentrated on the most distal implant supporting bone on loaded side. 5. The type of anchorage system affected in load transfer more than palatal coverage extent of the denture base. Conclusion: To the results mentioned above, in the case of patients with unfavorable biomechanical conditions such as not sufficient number of supporting implants, short length of the implant, and poor bone quality, selecting a resilient type attachment or minimizing the distal cantilevered bar is considered to be an appropriate method to prevent overloading on implants by reducing cantilever effect and gaining more support from the distal residual ridge.