• Journal of Trauma and Injury
• /
• 제26권3호
• /
• pp.175-182
• /
• 2013

Purpose: Crushing injuries by car tires result from a combination of friction, shearing, and compression forces and the severity of injury is influenced by the acceleration. Because car-tire injuries of the lower leg in children are common these days but they have received little attention; thus, our purpose was to look closely into this problem. Methods: A retrospective analysis was conducted of data from children under 15 years old age who visited an emergency department because of a car-tire-related crushing injury to the lower leg in pedestrian traffic accident from January 2008 to September 2012. The patient's age, sex, site of injury, degree of injury, associated injuries, type of surgery, and complications were reviewed. Results: There were 39 children, the mean age was 8.0 years, and 71.8% were boys. The dorsal part of the leg was involved most frequently. According to the severity classification, 15 children were grade I, 6 were grade II, and 18 were grade III. Among 24 patients, 13 were treated with skin graft and 3 were treated using a sural flap. Twelve patients developed complications, such as hypertrophic scarring, contractures, and deformities with significant bone loss. Conclusion: Various degrees of skin or soft tissue defects were caused in children by car tires. In this study, patients were often also had tendon or bone damage. Proper and timely initial treatments are needed to reduce the incidence of infection, the number of operative procedures, and the hospital stay.

• 대한기계학회논문집
• /
• 제10권6호
• /
• pp.852-860
• /
• 1986

본 연구에서는 청정실 내부에 하나의 작업대가 유동을 방해하고 있으며, 출구 공기덕트가 2개이기 때문에 출구의 평균압력조건은 주어지나 출구속도의 경계조건이 간단히 기술되지 않는 청정실내에서 유동을 예측하고자 하였으며, 수치계산상의 구체 적인 방법을 논하였다. 그 결과로서 작업대 위치 및 각 출구에서의 압력조건에 따른 유동장의 형태 및 각 출구에서의 유출유량 비율등을 논하였다.

• 한국화재소방학회논문지
• /
• 제25권4호
• /
• pp.89-93
• /
• 2011

(초)고층건축물에서 승강로가 연기 확산의 주요 통로였기 때문에 승강기를 통해 피난하는 것은 권장되지 않았다. 하지만 북미에서는 승강로를 연기로부터 방호하기 위해, 승강로를 가압하는 방식을 사용하여 왔다. 이번 시험은 실제로 승강로 급기가압 방식을 이용해서 연기 전파를 차단할 수 있는지와 피난수단으로 승강기를 사용할 수 있는지를 검증하기 위해 고층 아파트에서 실시되었다. 시험 결과 승강로가압은 공기의 이동에 의한 마찰손실이 작았기 때문에 150 CMM의 풍량에서 승강장과 세대 사이에 50 Pa의 차압을 전층에 고르게 형성시켰다. 또한 1개층 세대 문과 승강기 문이 동시에 개방되었을 때, 180 CMM의 풍량으로 연기의 역류를 차단할 수 있는 방연풍속을 형성하였다. 그리고 승강로가압은 모든 문이 닫힌 상태에서 차압유지에 필요한 풍량과 1개층이 개방되었을 때 방연풍속을 유지하는데 필요한 풍량의 차가 작아서 과압의 우려가 낮을 것으로 예상되었다. 따라서 이번 시험을 통해 고층아파트의 화재 시에 승강로가압을 적용하면 일반인과 피난약자의 피난수단으로 승강기를 사용할 수 있음을 확인하였다.

• 한국화재소방학회논문지
• /
• 제24권2호
• /
• pp.97-105
• /
• 2010

압력차를 이용한 연기제어기법은 피난계단 또는 대피공간으로 연기의 유입을 방지하기 위한 방법 중 가장 많이 알려져 있다. 그럼에도 불구하고 국내에서는 기술에 대한 이해부족에 기인한 많은 문제점이 발생하고 있다. 그러한 관점에서 차압제연설비의 성능에 영향을 미치는 주요인자인 풍도면적, 급기댐퍼의 개구면적, 부속실 개방에 따른 영향, 연돌효과 그리고 급기주입구의 위치가 시스템의 성능에 어떠한 영향을 미치는지를 분석하였다. 중요한 결론으로는 풍도의 단면적이 작을수록 마찰손실이 증가하여 적절한 차압을 유지할 수 없었으며, 특히 연돌효과는 저층부의 압력차를 작게 만들어 차압제연시스템의 성능을 약화시키는 가장 큰 요인으로 확인되었다.

• 한국재료학회지
• /
• 제19권8호
• /
• pp.437-442
• /
• 2009

This paper describes an improved strategy for controlling the adhesion force using both the antiadhesion and adhesion layers for a successful large-area transfer process. An MPTMS (3-mercaptopropyltrimethoxysilane) monolayer as an adhesion layer for Au/Pd thin films was deposited on Si substrates by vapor self assembly monolayer (VSAM) method. Contact angle, surface energy, film thickness, friction force, and roughness were considered for finding the optimized conditions. The sputtered Au/Pd ($\sim$17 nm) layer on the PDMS stamp without the anti-adhesion layer showed poor transfer results due to the high adhesion between sputtered Au/Pd and PDMS. In order to reduce the adhesion between Au/Pd and PDMS, an anti-adhesion monolayer was coated on the PDMS stamp using FOTS (perfluorooctyltrichlorosilane) after $O_2$ plasma treatment. The transfer process with the anti-adhesion layer gave good transfer results over a large area (20 mm $\times$ 20 mm) without pattern loss or distortion. To investigate the applied pressure effect, the PDMS stamp was sandwiched after 90$^{\circ}$ rotation on the MPTMS-coated patterned Si substrate with 1-${\mu}m$ depth. The sputtered Au/Pd was transferred onto the contact area, making square metal patterns on the top of the patterned Si structures. Applying low pressure helped to remove voids and to make conformal contact; however, high pressure yielded irregular transfer results due to PDMS stamp deformation. One of key parameters to success of this transfer process is the controllability of the adhesion force between the stamp and the target substrate. This technique offers high reliability during the transfer process, which suggests a potential building method for future functional structures.

• Nuclear Engineering and Technology
• /
• 제28권1호
• /
• pp.56-71
• /
• 1996

지지격자를 갖는 5$\times$5 핵연료 봉다발부수로내에서 국부 수력특성인자들을 레이저 유속측정장치인 LDV(Laser Doppler Velocimeter)를 이용하여 측정하였다. 이 연구는 지지격자가 봉다발 난류유동구조에 미치는 영향에 관한 연구에 관점을 두었다. 축방향속도, 난류강도, 편이도, 편평도 등의 측정인자들을 측정하였다. 압력강하를 측정하여 지지격자의 손실계수와 봉다발의 마찰계수를 구하였다 실험결과로부터 활발한 난류혼합거리는 지지격자로부터 x/D$_{h}$=10까지이고, 강제 혼합거리는 지지격자로부터 x/D$_{h}$=20까지임이 관찰되었다. 지지격자하류에서의 축방향 난류강도 감쇄거동은 mesh격자나 screen을 통과하는 난류유동과 같은 경향을 보여주었다. 측정된 자료로부터 부수로해석 code에 입력함수로 적용할 수 있는 국부 난류혼합계수상관식을 구하였다. 국부 혼합계수분포 경향을 관찰하여보면 지지격자 근처에서 최대값을 보이고, 하류방향으로 진행하면서 안정된 값을 갖는다.

• Journal of Welding and Joining
• /
• 제26권4호
• /
• pp.85-91
• /
• 2008

The grooving corrosion is caused mainly by the different microstructures between the matrix and weld which is formed during the rapid heating and cooling cycle in welding. By this localized corrosion reaction of pipes, it evolves economic problems such as the early damage of industrial facilities and pipe lines of apartment, and water pollution. So lots of researches were carried out already about grooving corrosion mechanism of ERW carbon steel pipe but there is seldom study for water hammer happened by fluid phenomenon and corrosion rate by flow velocity. In this study, the analysis based on hydrodynamic and fracture mechanics was carried out. ANSYS, FLUENT and STAR-CD were used for confirmation of flow phenomenon and stress on the pipe. As the results, fatigue failure is able to be happened by water hammer and grooving corrosion rate is increased cause by turbulent. Grooving corrosion is happened on the pipe, then friction loss of fluid is occurred from corroded part. Erosion can be happened enough in corroded region of microscopic size that wear "V" form. Also pipe is able to be damaged by water hammer effects because of corroded region is general acting as a notch effects. Corrosion depth was more than half of total thickness, it can be damaged from water hammer pressure.

• 한국유체기계학회 논문집
• /
• 제20권1호
• /
• pp.15-20
• /
• 2017

The small turbocharger for the automotive application is designed to operate up to 200,000 rpm to increase system efficiency. Because of high rotation speed of turbocharger, floating ring bearing are widely adopted due to its low friction loss and high rotordynamic stability. This paper presents a linear and nonlinear analysis model for a turbocharger rotor supported by a semi-floating ring bearing. The rotordynamic model for the turbocharger rotor was constructed based on the finite element method and fluid film forces were calculated based on the infinitely short bearing assumption. In linear analysis, we considered fluid film force as stiffness and damping element and in nonlinear analysis, the fluid film force was calculated by solving the time dependent Reynolds equation. We verified the developed theoretical model by comparing to modal test results of test rotors. The analysis results show that there are two unstable modes, which are conical and cylindrical modes. These unstable modes appear as sub-synchronous vibrations in nonlinear analysis. In nonlinear analysis, frequency jump phenomenon demonstrated when vibration mode is changed from conical mode to cylindrical one. This jump phenomenon was also demonstrated in the test. However, the natural frequency measured in the test differs from those obtained using nonlinear analysis.

• Nuclear Engineering and Technology
• /
• 제24권3호
• /
• pp.274-284
• /
• 1992

가압경수로 최적 열수력 분석용 전산코드인 CATHRE의 모델 평가를 위하여 가압경수로의 가상 냉각재 상실사고시 원자로 용기내의 유동현상을 모의한 1/15축소의 CREARE 실험을 모의 계산하였다. 이 실험에서 주요변수들은 비상노심 탱각재 주입량과 아냉정도 그리고 계통압력 및 노심에서 발생되는 증기유량이지만. 본 연구에서는 우선 Downcomer에서 역방향유동의 정성적 분석에 촛점을 맞추었다. 모의 계산 결과와 실험 결과를 비교할 때 정량적인 값 뿐 아니라 변화의 경향에서도 차이가 나타난 것은 주로 적절하지 못한 일부의 수치해석 모델과 상간의 계면마찰 때문으로 판단된다. 따라서 매개변수적 민감도 분석을 통하여 CATHARE 전산코드의‘VOLUME’에 접한 접합점에서 운동량 보존방정식의 상세연구 혹은 다차원 분석을 통해서 이 경우의 물리적 현상을 보다 현실적으로 나타낼 수 있다는 결론을 얻었다.

• 한국유체기계학회 논문집
• /
• 제20권2호
• /
• pp.53-62
• /
• 2017

In this paper, the effect of oil conditions in rotor dynamic behaviors of a FFRB (Fully-Floating Ring Bearing) is investigated. Through the characteristic of a FFRB has two films, it has several advantages such as less friction loss and better stability over a wide speed range. However, it is difficult to supply a oil to the inner film. Thus, turbocharger makers have been paid significant attention to the lubrication of a FFRB because of its importance. This work focuses on the influence of oil inlet pressure and temperature. The methodologies of computational simulation and experimental test were used to estimate the rotor dynamic behaviors. In experimental test, the single-scroll turbocharger for the 1.4L diesel engine was used. The results show that the oil inlet pressure and temperature will place considerable influence on the rotor response. Oil conditions affect RSR (Ring Speed Ratio) which is cause of sub-synchronous vibrations, which also cause of oil whirling and whip even a critical speed. At higher speed range, the phenomenon of self-excited vibrations which is cause of instability of fluid whirl is investigated through the orbit shapes that consist of small orbit and large amplitude orbit. It is shown that some performance of a FFRB can be controlled by the conditions of oil supply. Finally, it was revealed that the oil induced operating conditions will strongly affect the turbocharger rotor dynamics behaviors.