• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.4
• /
• pp.471-478
• /
• 2012

The role of moisture absorptive capacity of pre-silage material and its relationship with silage effluent in high moisture by-product feedstuffs (HMBF) is assessed. The term water retention capacity which is sometimes used in explaining the rate of effluent control in ensilage may be inadequate, since it accounts exclusively for the capacity of an absorbent incorporated into a pre-silage material prior to ensiling, without consideration to how much the pre-silage material can release. A new terminology, 'potential water retention capacity' (PWRC), which attempts to address this shortcoming, is proposed. Data were pooled from a series of experiments conducted separately over a period of five years using laboratory silos with four categories of agro by-products (n = 27) with differing moisture contents (highest 96.9%, lowest 78.1% in fresh matter, respectively), and their silages (n = 81). These were from a vegetable source (Daikon, Raphanus sativus), a root tuber source (potato pulp), a fruit source (apple pomace) and a cereal source (brewer's grain), respectively. The pre-silage materials were adjusted with dry in-silo absorbents consisting wheat straw, wheat or rice bran, beet pulp and bean stalks. The pooled mean for the moisture contents of all pre-silage materials was 78.3% (${\pm}10.3$). Silage effluent decreased (p<0.01), with increase in PWRC of pre-silage material. The theoretical moisture content and PWRC of pre-silage material necessary to stem effluent flow completely in HMBF silage was 69.1% and 82.9 g/100 g in fresh matter, respectively. The high correlation (r = 0.76) between PWRC of ensiled material and silage effluent indicated that the latter is an important factor in silage-effluent relationship.

• International Journal of Concrete Structures and Materials
• /
• v.10 no.3
• /
• pp.337-353
• /
• 2016

The successful completion of the present research would be achieved using ground waste glass (GWG) microparticles in self-consolidating concrete (SCC). Here, the influences of GWG microparticles as cementing material on mechanical and durability response properties of SCC are investigated. The aim of this study is to investigate the hardened mechanical properties, percentage of water absorption, free drying shrinkage, unit weight and Alkali Silica Reaction (ASR) of binary blended concrete with partial replacement of cement by 5, 10, 15, 20, 25 and 30 wt% of GWG microparticles. Besides, slump flow, V-funnel, L-box, J-ring, GTM screen stability, visual stability index (VSI), setting time and air content tests were also performed as workability of fresh concrete indicators. The results show that the workability of fresh concrete was increased by increasing the content of GWG microparticles. The results showed that using GWG microparticles up to maximum replacement of 15 % produces concrete with improved hardened strengths. From the results, when the amount of GWG increased there was a gradual decrease in ASR expansion. Results showed that it is possible to successfully produce SCC with GWG as cementing material in terms of workability, durability and hardened properties.

• Journal of Korean Association for Spatial Structures
• /
• v.17 no.4
• /
• pp.167-174
• /
• 2017

The F3D(Free-Form Formwork 3D Printer) technology that manufactures EPS(Expanded Polystyrene) formworks for irregular-shaped concrete structures by 3D printers was developed to reduce the cost and time. Because of weak strength and low elastic modulus of the EPS, structural performance including lateral pressure by fresh concrete of the formwork that consisted of EPS should be investigated. In order to calculate lateral pressures acting on formwork, several variables including sizes, shapes of formwork, tangential force(fricition) between fresh concrete and formwork, and material properties of fresh concrete should be considered. However, current regulations have not considered the properties of concrete, only focused on vertical formwork. Galleo introduced 3-dimensional finite element analysis models to calculate lateral pressure on formwork. Thus, proposed finite element analysis model based on previous studies were verified for vertical formwork and irregular-shaped formwork. The test results were compared with those by FEM analysis. As a result, the test agrees well with the analysis.

• Food Science of Animal Resources
• /
• v.21 no.3
• /
• pp.235-245
• /
• 2001

This study was conducted to evaluate the usefulness of Second-Heat-Seal film(SHS) as an alternative material to PVDC/EVA shrink film(VSP) being currently used by domestic meat packer for vacuum-packaging of fresh meat. The samples from pork loin and beef striploin and round were stored at 2$^{circ}C$ for 5 weeks and measured for the changes of microbial counts, color, pH, volatile basic nitrogen(VBN), purge loss and sensory parameters. The pork loins packed with SHS showed higher spermine contents during the whole storage period at 2$^{circ}C$, and lower counts in total microbes and lactic acid bacteria after 28 days storage at 2$^{circ}C$ than those packed with SHS tended to be lower than those packed with VSP over the storage time. Nevertheless, no significant differences were observed between two packaging treatments in the other quality parameters evaluated. It is therefore concluded that SHS film might have a possibility to substitute for VSP film for vacuum-packaging of fresh meat at least from a materials point of view.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.389-394
• /
• 2008

Nowadays Plate Heat Exchanger (PHE) is widely used in different industries such as chemical, food and pharmaceutical process and refrigeration due to the efficient heat transfer performance, extreme compact design and efficient use of the construction material. In present work, PHE is applied in the fresh water generator system. Fresh water generators or desalinators are installed in ship to convert seawater to fresh water using heat from engines. PHE is an important part of a condensing or evaporating system. Among many of factors which should be concentrated on, the heat transfer and pressure drop is most important parts during sizing and rating the performance of PHE. Flow maldistribution is common but it will significantly reduce the heat exchanger performance. In this paper provide a overview of PHE cover basic of theory and conduct a numerical approach for flow distribution in plate channel. An experimental study on the performance of fresh water generator system which developed by plate heat exchanger will presented in future research. Thus, extensive experiment and analysis is required to study the thermal and fluid flow characteristics of PHE.

• Journal of Animal Reproduction and Biotechnology
• /
• v.37 no.2
• /
• pp.106-112
• /
• 2022

Cryopreservation of porcine ovarian tissue by vitrification method is a promising approach to preserve genetic materials for future use. However, information is not enough and technology still remains in a challenge stage in pig. Therefore, the objective of present study was to determine possibility of vitrification method to cryopreserve porcine ovarian tissue and to confirm an occurrence of cryoinjuries. Briefly, cryoinjuries and apoptosis patterns in vitrified-warmed ovarian tissue were examined by histological evaluation and TUNEL assay respectively. In results, a damaged morphology of oocytes was detected among groups and the rate was significantly (p < 0.05) lower in vitrification group (25.8%) than freezing control group (67.7%), while fresh control group (6.6%) showed significantly (p < 0.05) lower than both groups. In addition, cryoinjury that form a wave pattern of tissues around follicles was found in the frozen control group, but not in the fresh control group as well as in the vitrification group. Apoptotic cells in follicle was observed only in freezing control group while no apoptotic cell was found in both fresh control and vitrification. Similarly, apoptotic patterns of tissues not in follicle were comparable between fresh control and vitrification groups while freezing control group showed increased tendency. Conclusively, it was confirmed that vitrification method has a prevention effect against cryoinjury and this method could be an alternative approach for cryopreservation of genetic material in pigs. Further study is needed to examine the viability of oocytes derived from vitrified-warmed ovarian tissue.

• Korean Journal of Agricultural Science
• /
• v.37 no.1
• /
• pp.161-170
• /
• 2010

In Korea, food material industry encounters the emerging market which results from the growth of food service industry and food processing industry. Food material suppliers think that the total sales in Korean market may be around 20 trillion won. However, very small numbers of studies about Korean food material industry have been conducted. This paper analyzes the current status of food material industry and the market structure in Korea, and presents several suggestions for the development of Korean food material industry as following: building up the function of fresh-cut in production area, improving market structure, settling down the cold-chain system, enforcing the certification program for food safety.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.3
• /
• pp.86-95
• /
• 2004

This study was conducted to develop recycle revegetation methods for the restoration of the steep slopes by using fresh wood chip from construction sites. In general, the fresh wood chips can be used as soil media for the restoration works, because they can increase infiltration of rainfall and give enough porous to breathe and elongate for the root growth as well as economic value. The experiment was carried out to compare the effect of fresh wood chips from different mixing with soil, organic material and macromolecular compound which used for slope restoration works conducted by Hyunwoo green(Ltd.). The main results by monitoring for two years are summarized as follows; 1. The soil media made with low percentage of fresh wood chip covered quickly by herb plants. Especially, the soil mixture Type C (wood chip 20%) showed 80 percent ground coverage within two months after seeding. 2. The soil mixture type E (wood chip 40%) and type F (wood chip 50%) which contains more fresh wood chips than soil type C was under 30 percent ground coverage because wood plants are germinated well. If the restoration works aims at making forest, then the soil type E and F would be recommended than using soil type C. 3. Among the woody plants, Ailanthus alfissima, Pinus rigida, Pinus densiflora, and Albizzia julibrissin showed high percentage of germination rates and vigorous growth. In case of shrubs, Lespedeza cyrtobotria and Indigofera pseudo-tintoria scored high percentage of germination rates. 4. In native plants, Chrysanthemum indicum, Artemisia princeps, Lutos corniculatus and Imperata cylindrica showed high percentage of appearance. In case of introduced herbs, Coreopsis lanceolata, Coreopsis tinctoria and Oenothera oborata grew so vigorously. 5. The soil types which including fresh wood chips over 30-40 percentage showed the most diverse plant composition and the most effective germination rates and growth pattern with woody plants. 6. This works to develop recycle revegetation methods using fresh wood chips need more efforts for monitoring the exact effect of fresh wood chips as the soil media.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.2
• /
• pp.249-256
• /
• 1992

Italian ryegrass (Lolium multiflorum Lam.) was fractionated into leaf nutrient concentrate, fiber and deproteinised juice (DPJ). The fresh and fermented DPJs were concentrated and referred to as fresh deproteinised juice concentrate (FDPJC) and fermented deprotenised juice concentrate (FMTD DPJC). The FDPJC and FMTD DPJC were separately mixed with dried fiber and ensiled. Wilted crop silage and fresh fiber silage were also prepared from the same material crop. The nutritive value of these four silages were compared using four goats by $4{\times}4$ Latin square design. Green crop fractionation resulted lesser amount of crude protein and ash, and higher amount of neurtal detergent fiber, acid detergent fiber, cellulose and hemicellulose in fresh fiber. The pH of fresh fiber silage was lower than that of the other silages. Addition of FDPJC or FMTD DPJC to the dried fiber at ensiling did not improve the silage qualities; but all the silages were satisfactorily preserved. Goats fed these silages showed similar ruminal pH and total volatile fatty acid concentrations. But addition of FMTD DPJC was effective on increasing ruminal acetic acid concentration reducing propionic acid concentration. Ruminal n- and iso- butyric acid concentrations were proportional to that of propionic acid. High ammonia content of the silage containing FMTD DPJC was reflected to the ruminal ammonia concentration, urinary nitrogen excretion and serum urea level of goats. Inclusion of FDPJC or FMTD DPJC added 15 to 25% dry matter to the fiber silages with a little reduction in the digestibilities of most components of the silages.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.611-617
• /
• 2008

Nowadays Plate Heat Exchanger (PHE) is widely used in different industries such as chemical, food and pharmaceutical process and refrigeration due to the efficient heat transfer performance, extreme compact design and efficient use of the construction material. In present study, discussed main conception of plate heat exchanger and applied in vacuum. PHE and aimed apply in the fresh water generator which installed in ship to desalinate seawater to fresh water use heat from engines. The experiment is proceeded to investigate the heat transfer between cold and hot fluid stream at different flow rate and supply temperature of hot fluid. Generated fresh water as outcome of the system. PHE is an important part of a condensing or evaporating system. One of common assumptions in basic heat exchanger design theory is that fluid is to be distributed uniformly at the inlet of each fluid side and throughout the core. However, in practice, flow mal-distribution is more common and can significantly reduce the heat exchanger performance. The flow and heat transfer are simulated by the k-$\varepsilon$ standard turbulence model. Moreover, the simulation contacted flow maldistribution in a PHE with 6 channels.