• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.33 no.1
• /
• pp.33-40
• /
• 2010

Because sampling interval for data collection tends to be short compared with the overall processing time, in chemical process, instrumental process related tanks or furnace collected data have a significant autocorrelation. Insufficient control technique and frequent control actions cause unstable condition of the process. Traditional control charts which were developed based on iid (independently and identically distributed) among data cannot be applied on the existence of autocorrelation. Also unstable process is difficult to identity or diagnose. Because large-scale process has a lot of measurable variables and multi-step-structures among data, it is difficult to find relation between measurable variables and nonconformity. In this paper, we suggested an appicable model to diagnose the process and to find relation between measurable variables (CTQ) and nonconformity in the process having autocorrelation, unstable condition frequently, a lot of measurable variables, and multi-step-structure. And we applied this model to real process, to verify that the process engineers could easily and effectively diagnose the process and control the nonconformity.

• Journal of the Korean Society for information Management
• /
• v.27 no.4
• /
• pp.153-168
• /
• 2010

The information service of library is getting into a new paradigm as the smart phone usage increases. This study analyzes the contents reflected on the library mobile website to figure out the structural condition and features of the information. For this study, 26 academic libraries in U.S. are selected for an examination of their mobile websites, and the contents on the sites were analyzed. This study analyzed the most frequent type of contents provided in the mobile website. As a result, this study suggested the information structure and core contents of the mobile website in detail. The outcome of this study is expected to be a reference for building the mobile website of library.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.586-597
• /
• 2004

MAC (Medium Access Control) protocol is necessary for a OLT (Optical Line Termination) to allocate bandwidth to ONUs (Optical Network Units) dynamically in ATM PON (Passive Optical Network) operated in a kind of optical subscriber network having tree topology. The OLT collect information about ONUs and provide all permission with each ONU effectively by means of MAC protocol. Major functions of MAC protocol are composed of the algorism for distributing permission demanded by a ONU dynamically and allocation all permission used in APON properly. Sometimes MAC get to be a element of limiting the whole operation speed and occupy a most frequent operation part of the TC (Transmission Convergence) function module so it have to be designed to guarantee the best quality for each traffic. This paper introduce the way of implementation of a algorism which satisfy all of the upper renditions. This MAC algorism allocate bandwidth according to a number of working ONU and the information of the queue length dynamically and distribute permission for same interval to minimize delay variation of each ONU cell. MAC scheduler for the dynamic bandwidth allocation which is introduced in this paper has look-up table structure that makes programming possible. This structure is very suitable for implementation and operated in high speed because it require very simple and small chip size.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.3
• /
• pp.523-531
• /
• 2007

In this paper, we are going to develop a newly designed indexing scheme which is compatible to manage the moving objects and propose a cost model of the scheme. We propose a dynamic hashing index that insertion/delete costs are low. The dynamic hashing structure is that apply dynamic hashing techniques to combine a hash and a tree to a spatial index. We analyzed the dynamic index structure and the cost model by the frequent position update of moving objects and verified through a performance assessment experiment. The results of our extensive experiments show that the newly proposed indexing schemes(Dynamic Hashing Index) are much more efficient than the traditional the fixed grid and R-tree.

• International journal of advanced smart convergence
• /
• v.10 no.2
• /
• pp.151-157
• /
• 2021

Livestock farmers are using animal carcasses to dispose of the carcasses of livestock that have died of natural causes or disease. Most of the existing livestock carcass processors are mechanical in their structure without considering the environment. It has a function of sterilizing dead bodies at high pressure after processing them and causes environmental problems such as carbon monoxide emissions. If livestock carcasses occur, livestock farmers have to purchase their own livestock carcasses or entrust them to the outside world, which is costly. For this reason, the possibility of environmental pollution, infectious diseases, and spread has been increased recently by frequent dumping of dead bodies. The carcass of livestock mixed with manure not only serves as a medium for infectious diseases but also needsto be buried on a large scale as foot-and-mouth disease and avian influenza spread. As a result, the possibility of environmental pollution, such as contamination of groundwater, is increasing, so research is needed to protect and improve the environment. We aim to improve the process of processing livestock carcasses and purify the agricultural environment through development results on the form, structure and function of eco-friendly livestock carcasses. Its shape is applied with naturalshapessuch asstones and seeds. The material used in the dead body processis a brown beggar biocouple and is applied with an eco-friendly industrial animal recycling process. As a result of the study, it is expected to improve odors and the environment, and to be used as data to improve and help the livestock industry in the future.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.3
• /
• pp.239-249
• /
• 2022

Fire resistance performance and performance design of fire doors are becoming more important to prevent the spread of fire and support the rapid evacuation of apartment buildings. In this study, a database using 182 evacuation spaces and 308 common areas that passed the fire performance test was established, and fire door performance influencing factors were derived through an analysis of the structure(12 elements) of the fire door. As a result, the effects of fire-resisting filler density, adhesive, and foam gasket were confirmed for evacuation space, and the effects of fire-resisting filler, adhesive, and fire fins were confirmed for common areas. In the fire door fire resistance test, flames and cracks were analyzed as the most frequent failure factors.

• Journal of Korea Multimedia Society
• /
• v.25 no.8
• /
• pp.1069-1074
• /
• 2022

IP mobility can be handled in different layers of the protocol. Mobile IP has been proposed to handle the mobility of Internet hosts in the network layer. Recently, a new method based on the SIGMA mobility architecture has been proposed to support mobility management with reduced packet loss and latency. The location management structure is not suitable for frequent mobile handover due to the high mobility of the user with this transport layer solution. In this paper, we propose a location management optimization method in a mobile communication network by applying hierarchical location management using MMPs(Mobility Management Points) for transport layer mobility management. Therefore, we propose an efficient hierarchical mobility management structure even between heterogeneous wireless networks using MMPs for the probability that a mobile terminal can change multiple location areas between two messages and calls. The proposed method shows reduction in location update cost and data retrieval cost using MMPs, and as opposed to mobility appearing in time intervals with the minimum cost required to reach 90% of the stabilized cost, the mobility location update search, location It was found that the message processing cost per area was reduced.

• The Korean Journal of Ecology
• /
• v.24 no.6
• /
• pp.385-394
• /
• 2001

An attempt to clarify the landscape structure of urban areas was carried out in the greenbelt around Seoul, Korea's metropolis. By means of aerial photographs and a field survey, a vegetation map including land-use pattern was made. Landscape structure was described by analyzing this vegetation map and the results of phytosociological survey. Landscape element types identified were (1) secondary forest, (2) plantation, (3) cultivated field, (4) urbanized area, (5) graveyard, and (6) bare rock. Vegetation units, resulting from the phytosociological analysis, included Quercus mongolica, Q. variabilis, Q. acutissima, Pinus densiflora, Q. aliena, and Alnus japonica communities. Plantations were composed of Robinia pseudoacacia, Populus tomentiglandulosa, P. rigida, Larix leptolepis, P. koraiensis, and Castanea crenata stands. Patches near to human settlements in the lower zones of the mountains were fragmented and small but they became larger towards the higher mountain zones. On the other hand, the number of patches was fewer and their size was larger in Mt. Cheonggye more distant from the principal residential area, larger in size, and higher in elevation compared with the other 2 mountains, Mt. Daemo and Mt. Acha. Floristic composition of Mongolian oak(Q. mongolica) stand distributing in the upper part of each mountain, in which artificial interference is rare, showed a difference among those study areas different in parent rock and disturbance regime. But that of black locust(R. pseudoacacia) stand located in lowland of mountainous area, in which artificial interference is frequent was similar to each other. As the results of analyses on the frequency distribution of diameter classes of major species, dominant landscape elements, Mongolian oak forest showed different responses depending on artificial interference as continuous maintenance and retrogressive succession in the sites far from and near to the residential areas, respectively. On the other hand, black locust stands showed a probability to be restore to the native oak forest through progressive succession.

• Structural Engineering and Mechanics
• /
• v.68 no.3
• /
• pp.335-344
• /
• 2018

The execution of an experiment is a complex affair. It includes the preparation of test specimens, the measurement process itself and also the evaluation of the experiment as such. Financial requirements can differ significantly. In contrast, the cost of numerical simulations can be negligible, but what is the credibility of a simulated experiment? Discussions frequently arise concerning the methodology used in simulations, and particularly over the geometric model used. Simplification, rounding or the complete omission of details are frequent reasons for differences that occur between simulation results and the results of executed experiments. However, the creation of a very complex geometry, perhaps all the way down to the resolution of the very structure of the material, can be complicated. The subject of the article is therefore a means of creating the material structure of concrete contained in a test specimen. Because a complex approach is taken right from the very start of the numerical simulation, maximum agreement with experimental results can be achieved. With regard to the automation of the process described, countless material structures can be generated and randomly produced samples simulated in this way. Subsequently, a certain degree of randomness can be observed in the results obtained, e.g., the shape of the failure - just as is the case with experiments. The first part of the article presents a description of a complex approach to the creation of a geometry representing real concrete test specimens. The second part presents a practical application in which the numerical simulation of the compressive testing of concrete is executed using the generated geometry.

• Research in Community and Public Health Nursing
• /
• v.15 no.2
• /
• pp.209-217
• /
• 2004

Purpose: The purpose of this study was to construct the structure, process and outcome of community-based home care nursing service and to examine their validity. Method: There were two steps. The first step was developing the structure and process of community-based home care and the second was evaluating the outcome of community-based home care. Home care services were provided to 25 clients who had health problems. Data on these clients were analyzed. Result: According to Albrecht Model, in the developed structure and process of community-based home care, structure contained facility's philosophy, organization, delivery system, steering committee, office, equipments, medical instruments, the home care nurse and client of home care nursing. Process contained classification of client. nursing diagnosis and nursing intervention. The majority of clients were men (56%). The service was used mostly by people aged over 50 (82%). The most frequent nursing diagnoses were altered urinary elimination (23.2%). impaired skin integrity (21.8%) and risk for infection (17.6%). Nursing interventions included wound care (16.7%), tube care (15.1%) and catheter care (14.5%). Conclusion: Several strategies are suggested from this study: first, activate a referral system within the national health care system: second, increase public information on home care nursing: third, develop home care nursing services for elderly people: and fourth, construct a cooperation system between home care services and social welfare services.