• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.2 no.2
• /
• pp.19-24
• /
• 1991

This paper propose a new taegeuk shaped directional couper and verify the possibility of high power division rate in those directional coupler through the experiments. We took the taegeuk shaped structure in those proposed directional coupler to utilize a $3\lambda/4$ section of hybrid ring directional coupler actively, and calculated the branch admittances, which satisfied the condition of perfect matching and isolation in the center frequency, by even odd mode analyzing methodes. On the result, we knew that it can be realized a much higher power division rate than reported result in same circuit area within the producible resistance limit in the microstrip line, made the taegeuk shaped directional couplers with 0, 8, 16 dB power split ratio in the 10 GHz frequency using CGP - 502 plate, and confirmed the validity of theory through the experiments.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.16 no.1
• /
• pp.1-9
• /
• 1996

Many signal-processing techniques have been found to be useful in ultrasonic and nondestructive evaluation. Among the most popular techniques are signal averaging, spatial compounding, matched filters and homomorphic processing. One of the significant new process is split-spectrum processing(SSP), which can be equally useful in signal-to-noise ratio(SNR) improvement and grain characterization in several specimens. The purpose of this paper is to explore the utility of SSP in ultrasonic NDE. A wide variety of engineering problems are reviewed, and suggestions for implementation of the technique are provided. SSP uses the frequency-dependent response of the interfering coherent noise produced by unresolvable scatters in the resolution range cell of a transducer. It is implemented by splitting the frequency spectrum of the received signal by using gaussian bandpass filter. The theoretical basis for the potential of SSP for grain characterization in SUS 304 material is discussed, and some experimental evidence for the feasibility of the approach is presented. Results of SNR enhancement in signals obtained from real four samples of SUS 304. The influence of various processing parameters on the performance of the processing technique is also discussed. The minimization algorithm, which provides an excellent SNR enhancement when used either in conjunction with other SSP algorithms like polarity-check or by itself, is also presented.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.38 no.4
• /
• pp.265-275
• /
• 2005

A prerequisite for deriving the abundance estimates from acoustic surveys for commercially important fish species is the identification of target strength measurements for selected fish species. In relation to these needs, the goal of this study was to construct a data bank for converting the acoustic measurements of target strength to biological estimates of fish length and to simultaneously obtain the target strength-fish length relationship. Laboratory measurements of target strength on 15 commercially important fish species were carried out at five frequencies of 50, 70, 75, 120 and 200 kHz by single and split beam methods under the controlled conditions of the fresh and the sea water tanks with the 389 samples of dead and live fishes. The target strength pattern on individual fish of each species was measured as a function of tilt angle, ranging from $-45^{\circ}$ (head down aspect) to $+45^{\circ}$ (head up aspect) in $0.2^{\circ}$ intervals, and the averaged target strength was estimated by assuming the tilt angle distribution as N $(-5.0^{\circ},\;15.0^{\circ})$. The TS to fish length relationship for each species was independently derived by a least-squares fitting procedure. Also, a linear regression analysis for all species was performed to reduce the data to a set of empirical equations showing the variation of target strength to a fish length, wavelength and fish species. For four of the frequencies (50, 75, 120 and 200 kHz), an empirical model for fish target strength (TS, dB) averaged over the dorsal sapect of 602 fishes of 10 species and which spans the fish length (L, m) to wavelength (\Lambda,\;m)$ ratio between 5 and 73 was derived: $TS=19.44\;Log(L)+0.56\;Log(\Lambda)-30.9,\;(r^2=0.53)$.

• Progress in Medical Physics
• /
• v.4 no.2
• /
• pp.49-58
• /
• 1993

The complex glow curves were split into isolated glow curves to be calculated the values of kinetic order, activation energy, escape frequency and density of initial trap from the independent glow curves using the mathematical method of thermally stimulated processes. The minimization of the intensity difference between measured and theoretical glow curve was done by the nonlinear least-square program. The results of the fitted curves were almost equal to the actual values of the parameters. Thermoluminescence from gamma ray irradiated ${\alpha}$-Al$_2$ $O_3$ over the range of 300K to 600K was split into six glow curves. The kinetic order, activation energy and escape frequency of first glow curve were obtained as 1, 1.12eV and 6.79X10$\^$12/sec$\^$-1/, respectively, which were similar to the results of other method. Also the parameters of the second and the third glow curve and so forth were calculated.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.7-12
• /
• 2007

Swirl injector with multi-stage tangential entry was analyzed to suppress high-frequency combustion instability in Liquid Rocket Engines. In order to analyze the effect of swirl injector as an acoustic absorber, swirl injector was regarded as a quarter-wave resonator and it's damping capacity is verified in atmospheric temperature. It has a finite mode of vibration and natural frequencies which can be tuned to the natural frequencies of a model combustion chamber. When the targeted injector for each modes is located at anti-node point, the amplitude of modes was decreased. And when the injector of large diameter is mounted, the split of mode which accompanies the decrease of amplitude appeared. From the experimental data, it is proved that if the location of injector mounted is located at an anti-node position of the targeted modes with proper volume, the amplitude of modes is decreased and the split of modes occurs at anti-node point.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.1 no.2
• /
• pp.71-79
• /
• 2008

This study proposed a content-based image retrieval system that uses RGB maximum frequency indexing and BW clustering in order to deal with existing retrieval errors using histogram. We split RGB from RGB color images, obtained histogram which was evenly split into 32 bins, calculated and analysed pixels of each area at histogram of R, G, B and obtained the maximum value. We indexed the color information obtained, obtained 100 similar images using the values, operated the final image retrieval system using the total number and distribution rate of clusters. The algorithm proposed in this study used space information using the features obtained from R, G, and B and clusters to obtain effective features, which overcame the disadvantage of existing gray-scale algorithm that perceived different images as same if they have the same frequencies of shade. As a result of measuring the performances using Recall and Precision, this study found that the retrieval rate and priority of the proposed algorithm are more outstanding than those of existing algorithm.

• Journal of Power Electronics
• /
• v.17 no.4
• /
• pp.942-952
• /
• 2017

Modular multilevel converters (MMCs) have been receiving extensive research interest in high/medium-voltage applications due to its modularity, scalability, reliability, high-voltage capability, and excellent harmonic performance. Submodule capacitors are usually rather bulky because they have to withstand fundamental frequency voltage fluctuations. To reduce the capacitance of these capacitors, this study proposes a modified MMC with an active power decoupling circuit within each submodule. The modified submodule contains an auxiliary half bridge, with its capacitor split in two. Also, the midpoints of the half bridge and the split capacitors are connected by an inductor. With this modified submodule, the fundamental frequency voltage fluctuation can be suppressed to a great extent. The second-order voltage fluctuation, which is the second most significant component in submodule voltage fluctuations, is removed by the proper control of the second-order circulating current. Consequently, the submodule capacitance is significantly reduced. The viability and effectiveness of the proposed new MMC are confirmed by the simulation and experimental results. The proposed MMC is best suited for medium-voltage applications where power density is given a high priority.

• Journal of Korean Institute of Industrial Engineers
• /
• v.31 no.1
• /
• pp.1-9
• /
• 2005

This paper proposes the heuristic algorithm for the generalized GT problems to consider the restrictions which are given the number of machine cell and maximum number of machines in machine cell as well as minimum number of machines in machine cell. This approach is split into two phase. In the first phase, we use the similarity coefficient which proposes and calculates the similarity values about each pair of all machines and sort these values descending order. If we have a machine pair which has the largest similarity coefficient and adheres strictly to the constraint about birds of a different feather (BODF) in a machine cell, then we assign the machine to the machine cell. In the second phase, we assign parts into machine cell with the smallest number of exceptional elements. The results give a machine-part grouping. The proposed algorithm is compared to the Modified p-median model for machine-part grouping.

• Journal of Astronomy and Space Sciences
• /
• v.26 no.3
• /
• pp.345-354
• /
• 2009

A stepped septum polarizer has been designed and fabricated for the 43 GHz band KVN receiver system. The dual-circular polarizer converts left and right hand circularly polarized signals into linear polarizations in two separated rectangular waveguides. Measurements show that the performance of the designed septum polarizer covering 42-48 GHz frequency band is adequate to meet the requirement of KVN receivers. Especially, a polarizer for the KVN receiver of 85-95 GHz frequency band can be fabricated by scaling the dimensions of the septum polarizer developed in this paper.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.5
• /
• pp.784-792
• /
• 1990

In this paper, attempts have been made to compare the subjective performance of sub-band coding (SBC) techniques incorporating four representative modulation transfer functions (MTF's) of th human visual system(HVS): Sakrison, Nill, Ngan, and Rao. In SBC, the frequency band of input signal is split into 16 equal sub-bands. In addition, 28 sub-band splitting schemd which splits more sub-bands in low spatial frequency is considered to compare the 4 MTF's effectively. In encoding of each sub-band, the weight of each sub-band obtained from the MTF of HVS is applied to bit allocation process which minimize the weighted mean square error (WMSE). The differential pulse code modulation(DPCM) coder is used to encode the lowest sub-band and the pulse code modulation(PCM) coder is used for the rest of sub-bands. It is found that the images incorporating the MTF of Rao yields the best results in subjective criteria, followed by Ngan, Nill, Sakrison, and the images not employing the HVS.