• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.522-525
• /
• 2009

DC-shift phenomenon can be observed in Hybrid rocket combustion. This phenomenon makes performance drop which is structure problem or reduce thrust. Understanding of DC-shift phenomenon, the condition of the hybrid rocket combustion stability can be found. In this paper, the condition of Negative DC-shift was found and made by changing oxidizer flow with pre-post chamber. The Negative C-shift phenomenon and characteristic were defined from the experimental study.

• Proceedings of the KOR-KST Conference
• /
• 1999.10a
• /
• pp.405-410
• /
• 1999

• Journal of IKEEE
• /
• v.16 no.1
• /
• pp.51-55
• /
• 2012

In this paper, we propose to employ a ternary sequence as a cyclic code shift keying (CCSK) modulation sequence. And we simulate the performance in a frequency hopping spread spectrum/time division multiple access (FHSS/TDMA) system with CCSK. Wireless channel is modeled as Rayleigh fading channel. From the simulation results, it is demonstrated that the system adopting the ternary sequence as a CCSK sequence has higher performance than that with a random sequence.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.8B
• /
• pp.1436-1444
• /
• 2000

In this paper, we propose the joint carrier and symbol timing recovery algorithm using repetitive preamble and differential detection for burst modem. The proposed algorithm can estimate the frequency offset and the symbol timing error regardless of the amount of frequency offset, with a high accuracy, even using very short preamble and at low SNR values. The algorithms for continuous phase frequency shift keying (CPFSK) and phase shift keying (PSK) types are developed. Through computer simulations, we compare the proposed algorithm with the existing algorithms on the estimation accuracy in terms of the preamble length, and analyze those bit error rate(BER) performance.

• Journal of Drive and Control
• /
• v.19 no.4
• /
• pp.1-9
• /
• 2022

The structure and operating principle of the 2-speed shift reducer were explained, the allowable bending stress value of the material was compared with the analysis result through FM structural analysis program, and the average stress distribution value of von Mises was performed on the gear root atmosphere. The structural safety of the 2-speed planetary gear reducer was verified through FM structural analysis. The natural frequency was calculated by applying the specifications of the planetary gears of the 2-speed gearbox, and the critical speed of resonance was calculated by calculating the natural frequency and the transmission error of the engaged gear pair. As a result of analyzing the critical speed, since it is formed higher than the actual operating speed range, it is considered safe because there is no resonance problem due to the suggested specifications of the planetary gears of the 2-speed shift reduction.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.10
• /
• pp.1161-1168
• /
• 2010

The FHSS(Frequency Hopping Spread Spectrum), in which a transmitter changes its carrier frequency according to a certain hopping pattern, is widely used in the military communication system, since it is highly resistant to deliberate Jamming. However, the difference of BER performance of satellite communication system which using the different modulation scheme and Jamming model was not studied. Thus, in this paper, we consider PBNJ(Partial-Band Noise Jamming) and WPBJ(Worst case Partial-Band noise Jamming) as Jamming models, and evaluate BER(Bit Error Rate) performances of NC-MFSK(Non-Coherent M-ary Frequency-Shift Keying), SDPSK(Symmetric Differential Phase-Shift Keying), and GMSK(Gaussian filtered Minimum-Shift Keying) modulation schemes. Based on the results, we suggest the best transmission method for each condition.

• Progress in Superconductivity and Cryogenics
• /
• v.5 no.1
• /
• pp.111-117
• /
• 2003

In the design of the split type free displacer Stilting cryocooler the motion of the displacer is very important to decide the cooling capacity, which depends upon the working gas pressure, the swept volume in the compression space and the expansion space, operating frequency, the phase shift between piston and displacer, etc. In this study, Stirling cryocooler actuated by the electric farce of the dual linear motor is designed and manufactured. Cool down characteristics of the cold end with laser displacement sensor in the expander of the Stilting cryocooler is evaluated. The charging pressure was 15kg$_{f}$/$\textrm{cm}^2$ and operating frequency was 50Hz. Input power and the lowest temperature were about 32W and 67K, respectively. And, displacement of the piston is measured by LVDTs (Linear Variable Differential Transformers), displacement of thedisplacer is measured by laser optic method, and phase shift between piston and displacer is discussed. As the peak-to-peak pressure of the compressor was increased, peak-to-peak displacement of the displacer was increased. The peak-to-peak displacement of the displacer increases in the range of 0 - 64.5Hz(resonant frequency of the displacer), but decreases steeply when the operating frequency is bigger than the resonant frequency. Finally when the phase shift between displacements of the Piston and displacer is 45。, operating frequency is optimum and is decided by resonant frequency of the expander, mass and cross section area of the displacer and constant by friction and flow resistance.e.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.7
• /
• pp.86-98
• /
• 1996

Modulation and demodualtion circuits of chaos frequency shift keying have been implemented using chua's circuits. The modulatin circuit, which is designed ot perform the frequency-doubling by coupled synchronization wihtout changing the intrinsic characteristics of its two chaos signals generated, modulates the digital input signals. The demodulation circuit detects the digital input signals form carrier by drive synchronization. these circuits, which are simplest until now and have no restriction to their digital input amplitudes, perform the aimed functions.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.67 no.2
• /
• pp.82-89
• /
• 2018

This paper presents a novel prototype of dual mode control based phase shift ZVS PWM high frequency load resonant inverter with lossless snubber capacitors in addition to a single active auxiliary resonant snubber for electromagnetic induction heating(IH) foam metal based consumer fluid dual packs(DPA) heater. The operating principle in steady state and unique features of this voltage source soft switching high frequency inverter circuit topology are described in this paper. The lossless snubber and auxiliary active resonant snubber assisted constant frequency phase shift ZVS PWM high frequency load resonant inverter employing IGBT power modules actually is capable of achieving zero voltage soft commutation over a widely specified power regulation range from full power to low power. The steady state operating performances of this dual mode phase shift PWM series load resonant high frequency inverter are evaluated and discussed on the basis of simulation and experimental results for induction heated foam metal heater which is designed for compact and high efficient moving fluid heating appliance in the consumer pipeline systems.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.3
• /
• pp.219-227
• /
• 2021

This paper proposed an Orthogonal Frequency Division Multiplexing (OFDM) based biomimetic communication method using a dolphin whistle which covertly transmits communication signals to allies. The proposed method divides the dolphin whistle into several time slots corresponding to a number of OFDM symbols, and modulates the communication signal by mapping differential phase shift keying (DPSK) symbols into subcarriers that have the frequency bands of the dolphin whistle in each slot. The advantages of the proposed method are as follows: In the conventional Chirp Spread Spectrum (CSS) and Frequency Shift Keying (FSK) based biomimetic communication methods, the discontinuity of the frequency contour is large, but the proposed method can reduce the discontinuity. Even if the modulation order is increased, the degradation of the mimicking performance is small. The computer simulations demonstrate that the Bit Error Rate (BER) and mimicking performance of the proposed method are better performance than those of the conventional CSS and FSK.