• Applied Microscopy
• /
• v.47 no.3
• /
• pp.95-100
• /
• 2017

High resolution measurements of the carrier profile in semiconductor devices is required as the semiconductor industry progresses from the 10-nm lithography node to 7-nm and beyond. We examine the factors which determine the resolution of the present method of scanning spreading resistance microscopy as well as such factors for the newer method of scanning frequency comb microscopy that is now under development. Also, for the first time, we consider the sensitivity of both methods to the location of heterogeneities in the semiconductor. In addition, mesoscopic effects on these measurements are considered for the first time. Two simple analytical models are extended to study the sensitivity to heterogeneities as well as mesoscopic effects.

• Korean Institute of Interior Design Journal
• /
• v.23 no.5
• /
• pp.76-85
• /
• 2014

When conscious and unconscious exploring information of space-visitors which is contained in the information acquired in the process of seeing any space is analyzed, it can be found what those visitors pick up as factors in the space for its selection as visual information in order to put it into action. This study, with the object of the space reproduced in three dimensions from the cafe which was visited for conversation, has analyzed the process of acquiring space-information by sex to find out the features of scanning path, findings of which are the followings. First, the rate of scanning type of males was "Combination (50.5%)- Circulation (31.0%) and that of females "Horizontal (32.5%) - Combination (32.1%)", which shows that there was a big difference by sex in the scanning path which took place in the process of observing any space. Second, when the features of continuous observation frequency by sex is looked into, the trends of increased "horizontal" scanning and decreased "Combination" scanning of both showed the same as the frequency of continuous observations increased, while in case of "Circulation" scanning, that of females was found to decrease but that of males showed the aspect of confusion. Third, the 'Combination' scanning of males was found strong at the short observation time with three times of continuous observation frequency defined as "Attention Concentration" while the distinct feature was seen that the scanning type was dispersed to "combination-circulation" as the frequency of continuous observation increased. Females start the information acquirement with "combination-circulation" but in the process of visual appreciation they showed a strong "Horizontal" These scanning features can be defined as those by sex for acquiring space information and therefore are very significant because they are fundamental studies which will enable any customized space-design by sex.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.5
• /
• pp.455-461
• /
• 2009

In a scanning electron microscopy, image distortion is a critical issue and it is needed to be eliminated by some kinds of schemes. In this work, scanning frequency and scanning wave form are adjusted to have an improved image. The relationship between scan coil and its driver is investigated and appropriate frequency and wave form are suggested. It is proved that the selected frequency and wave form showed an enhanced image with less distortion, which were done by experiments. In addition, a noise elimination is addressed, providing improved image with a GROUND signal integration with the amplifier and the scan driver.

• Journal of the Optical Society of Korea
• /
• v.13 no.3
• /
• pp.330-334
• /
• 2009

A simple and compact frequency swept laser is demonstrated at $1.3{\mu}m$ using a wavelength scanning filter based on a rotating slit disk. The laser is comprised of a pigtailed semiconductor optical amplifier, a circulator, and a wavelength scanning filter in an extended cavity configuration. The wavelength scanning filter is composed of a collimator, a diffraction grating, a rotating slit disk, and a mirror. The instantaneous laser output power is more than 5 mW. The scanning range of the laser is extended to 80 nm at the maximum level, and 55 nm in the full width at half maximum at a scanning rate of 2 kHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.9B
• /
• pp.604-611
• /
• 2007

In this paper, we present an analysis of the throughput when there are multiple piconets and WLAN sharing the ISM bands. The analysis takes channel propagation characteristics and the capture effect. We also propose an algorithm which can be used to reduce the amount of channel scanning. By using traffic prediction of the interfering WLAN, we are able to maintain a reasonable performance in terms of fraction of time channel is wasted due to collisions or unused channel. Through computer simulation, we demonstrate that the proposed algorithm achieves reduced scanning frequency.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.10
• /
• pp.1807-1813
• /
• 2007

This paper deals with extending the variable natural oscillation frequency range of an active integrated FET oscillator. In this paper, we conform experimentally that the variable range of the natural oscillation frequency is expanded about three times in the oscillator controlled by the varactor diode. When the frequency difference is given to the oscillators in the two element antenna system, phase difference appeared between the oscillators. The 2-, 3-, 4-, 5-element patch antenna arrays are composed for the beam scanning experiments. All the above patch antennas show good phased array characteristics. The range of the scanning angle is about $30^{\circ}$, and the radiation power is gradually increased from $50{\mu}W\;to\;200{\mu}W$. The radiation patterns we sharpened as the number of elements is increased.

• Korean Journal of Optics and Photonics
• /
• v.19 no.2
• /
• pp.132-139
• /
• 2008

In scanning laser optical tweezers, high speed scanning stages are used to manipulate a laser beam spot. Due to the inertia of the stage, the output scanning signal decreases with increased frequency of the input signal. This discrepancy in the signals is difficult to observe since most of the energy from the laser beam is blocked out to avoid CCD damage. In this paper, we propose two methods to alleviate these problems. Firstly, frequency responses of piezo stages are measured to analyze the signal drops and the input signal is compensated accordingly. Secondly, an overlay of the scanning path is drawn on the live monitoring screen to enhance the visibility of the scanning path. The result is a drop-compensated scanning with clear path view.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.267-267
• /
• 2003

• Journal of the Optical Society of Korea
• /
• v.14 no.2
• /
• pp.104-108
• /
• 2010

We proposed an axis transformation technique which reveals a distance parameter directly from optical scanning holography (OSH). After synthesis of a real-only spectrum hologram and power fringe adjusted filtering, we transform an original frequency axis to a new frequency axis using interpolation. In the new frequency axis, the filtered hologram has a single frequency which is linearly proportional to the distance parameter. Thus, the inverse Fourier transformation of the filtered hologram gives a delta function pair in the new spatial axis. Finally, we extract the distance parameter by detecting the location of the delta function pair.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.5
• /
• pp.479-485
• /
• 2011

To acquire images in a thermionic-scanning electron-beam system, a scanning unit is needed to control the electron beam emitted from the tungsten filament source. In scanning the electron beam on the solid surface, the signalto-noise ratio depends on the scanning frequency. We used a digital filter to reduce noise by analyzing the real-time frequency of a secondary electron signal. The noise and the true image signal were well separated. We designed the digital filter via a DSP floating-point operation, and the noise elimination resulted in enhanced image quality in a highresolution mode.