• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.798-801
• /
• 2000

For the performance enhancement of communication system, high quality filters are required. Also a minimization of size of filter is required for the interation of devices in the limited area. Conventional metal filters made of copper can be substituted by high quality high temperature superconducting(HTS) films for better performance. Hairpin type filters have been designed with the center frequency 14 GHz for the size reduction. 3-pole and 4-pole filters centered at 14 GHz with the bandwidth of about 300 MHz were designed and fabricated. With the simulation results, the frequency responses showed low insertion loss and sharp skirts characteristics. The frequency response of HTS 14 GHz fi1ter was measured at 77 K and compared with the simulation results. We have compared YBCO filters and copper filters which were made with the same design rules. Simulated and measured frequency responses reveal that HTS YBCO hairpin type bandpass filters show better performance than copper filters.

• 전자공학회논문지A
• /
• 제30A권9호
• /
• pp.6-13
• /
• 1993

In is well-known that system performance in the high speed digital radio communication system is usually deteriorted due to the frequency selective fading distortion. In this paper, bit error rate(BER) performance by the reception phase error in cellular mobile communication systems is derived and analyzed. The system is modeled as a frequency selective fast Rayleigh fading channel corrupted by additive white gaussian noise(AWGN) and co-channel interference(CCI). Our numerical results show that for the 24KBaud(48Kb/s) $\pi$/4-DQPSK operated at carrier frequency 800 MHz and C/I<20 dB, the BER will be dominated by CCI if the vehicular speed is below 100 Km/h. The results show that performance, when reception phase error is below $\pi$/12, is deterioreted less than 3 dB, and that performance, when reception phase error is above $\pi$/12, is degraded over 3 dB.

• 한국공작기계학회논문집
• /
• 제10권3호
• /
• pp.26-30
• /
• 2001

Controller refinement scheme to improve the performance of a conventional system automatically in frequency domain is proposed. The controller automatic tuning method features using experimental frequency responses of the conventional closed-loop system, the conventional controller, and the improved closed-loop system, instead of poorly modeled plant due to non-linearities and disturbances. The improved closed-loop system characteristics is automatically acquired by the con-ventional closed-loop system characteristics and the proposed performance index in system bandwidth. And the proper controller is realized by least squares approximation in frequency domain. To testify the usefulness of the approach, the path tracking control of robot arm is performed. Experimental results and analytic results are well-matched.

• 한국정보전자통신기술학회논문지
• /
• 제12권6호
• /
• pp.612-618
• /
• 2019

무인 이동체 관련 산업은 4차 산업혁명 기술발전과 더불어 공공 및 민간 수요의 급증으로 시장이 폭발적으로 성장하고 있다. 뿐만 아니라 통신 서비스에도 무인 이동체가 활용되고 있다. 본 논문에서는 도플러 주파수의 특성에 따른 무인 비행체의 통신 성능을 분석하였다. 무인 비행체의 기하학적 모델을 이용하여 도플러 주파수를 계산하고, 제어기의 위치를 원점으로 고속의 무인 비행체를 고려하여 시속 10km, 30km, 300km, 1000km의 도플러 주파수와 AWGN에 의한 BER 성능을 측정하였다. 도플러 주파수 모델은 Dent 모델을 이용하였으며, 가산성 백색 가우시안 잡음(AWGN)을 추가하여 송신단과 수신단의 비트 오차를 확인하였다. 저속의 무인 비행체는 일반적으로 0.2의 BER 성능을 나타내었으며, 고속의 무인 비행체는 일반적으로 0.06의 BER 성능을 나타내었다. 동일한 속도에서 주파수 대역이 증가하면 BER 성능은 증가하였으며, 동일한 주파수 대역에서 속도가 증가하면 BER 성능은 감소됨을 확인하였다. 이는 이론적으로 예상 가능한 BER 성능 예측을 시뮬레이션 결과를 통해 확인하였다. 2.6GHz, 5GHz, 28GHz 각각의 주파수 대역에서 도플러 주파수에 의한 BER 특성과 제어기 함수에 의한 BER 특성을 확인하였으며, 무인 비행체의 이동시 발생하는 도플러 주파수는 제어기의 위치와 가까운 곳에서 통신 성능에 많은 영향을 미치는 것을 확인하였다.

• 전자공학회논문지SC
• /
• 제47권2호
• /
• pp.1-7
• /
• 2010

본 논문은 Air-cored induction 코일 센서의 고주파 동작 특성에 대한 실험적 관계식을 제시한다. Air-cored induction 코일 센서는 입, 출력 간 선형성이 좋고 저주파 영역에서 정확한 출력 특성 예측이 가능해서 널리 사용되지만 민감도가 낮다는 단점이 있다. 반면, 고주파 영역에서는 코일 센서 구성상의 기생효과로 인해 민감도가 크게 향상되지만 인가되는 자기장 주파수에 대한 출력 민감도의 의존성으로 인해 사용이 제한되어 왔다. 그러나 최근 고정된 주파수의 자기장을 대상으로 하는 비파괴 자기 검사법에서 검사 성능을 향상시키기 위하여 이와 같은 코일 센서의 고주파 특성을 이용하기 시작하였는데 코일 센서를 고주파 영역에서 사용하기 위해서는 고주파 영역에서의 센서 특성에 대한 예측이 요구된다. 본 논문에서는 다양한 코일 센서의 구성 조건하에서 코일 센서의 주파수 응답 특성을 측정하고 이 측정 결과를 기반으로 하여, 민감도가 최대가 되는 공진 주파수와 최대 민감도를 코일 센서 단면의 지름, 권선 지름, 그리고 권선 수와 같은 구성 파라미터의 함수식으로 근사하였다. 함수식은 실험결과를 잘 반영하며, 추론된 함수식으로부터 원하는 사양을 가지는 코일 센서의 구성 방안 및 관련 회로 설계 사양을 얻을 수 있다.

• 전기학회논문지
• /
• 제63권3호
• /
• pp.371-375
• /
• 2014

In this paper, we compared the performances of the Right Handed Transmission Line (RHTL) and the Left Handed Transmission Line (LHTL) phase shifters as a frequency translator. Unlike other phase shifters, both phase shifters show a $0^{\circ}-360^{\circ}$ phase variation for a broadband frequency and compact in size which are ideal to use as a frequency translator. For the performance comparison, we fabricated both a RHTL and a LHTL phase shifter to cover 1.5 GHz - 2.4 GHz range with the whole $360^{\circ}$ phase variation. For the frequency range, a LHTL based frequency translator showed a much better performance whose Spurious Free Dynamic Range (SFDR) is 4dB - 17dB higher than the RHTL based frequency translator when the sawtooth modulation freqncy is 11 kHz. This is due to the linear phase-voltage variation of LHTL phase shifter. Furthermore, the LHTL phase shifter shows a less insertion loss and a insertion loss variation than the RHTL phase shifter. Overall, the LHTL based frequency translator outperformed RHTL based freqency translator.

• 한국군사과학기술학회지
• /
• 제23권3호
• /
• pp.213-220
• /
• 2020

This paper proposes a method on the performance analysis of pulse repetition frequency jitter compensation for generating Doppler profile. Exact phase compensation of each pulse is required to obtain Doppler profiles under pulse repetition frequency jitter. Three parameters such as velocity, pulse repetition frequency, and carrier frequency are examined to cause errors when conducting the pulse repetition frequency jitter compensation, then assuming well-focused Doppler profiles reflect well-conducted pulse repetition frequency jitter compensation, the proposed method in this paper utilizes the contrast to measure how well Doppler profile is generated. These are validated by electromagnetic computation data and computer simulation. Then, it is concluded which parameter is important on the performance analysis of pulse repetition frequency jitter compensation by using the contrast.

• Perspectives in Nursing Science
• /
• 제14권2호
• /
• pp.70-80
• /
• 2017

Purpose: This study aims to identify the factors that affect the expected frequency of performance and the importance in nursing practice of total care service recognized by nursing college students. Methods: This is a descriptive study. A self-administered questionnaire survey was conducted on 288 nursing students of E university and data was collected and analyzed using the SPSS program. Results: The average scores for the expected frequency of performance and the importance in nursing practice of total care service were $4.07{\pm}0.58$ and $4.00{\pm}0.50$ respectively. The expected frequency of performance was found to have a significantly positive correlation with the importance in nursing practice. Additionally, the factors that influenced the degree of recognition in the expected frequency of performance and the importance in nursing practice of total care service among nursing students were comfortable care and respiratory care, respectively. Conclusion: The major finding of this study shows a significantly positive correlation between the expected frequency of performance and the importance in nursing practice. These results suggest that effective and systematic education is needed on factors affecting the expected frequency of performance and the importance in nursing practice for nursing college students.

• 한국도서관정보학회지
• /
• 제44권1호
• /
• pp.27-47
• /
• 2013

이 연구에서는 자동 색인을 통해 쉽게 얻을 수 있는 자질의 문헌빈도와 장서빈도를 이용하여 자동분류에서 자질 선정 기법을 kNN 분류기에 적용하였을 때, 어떠한 분류성능을 보이는지 알아보고자 하였다. 실험집단으로 한국일보-20000(HKIB-20000)의 일부를 이용하였다. 실험 결과 첫째, 장서빈도를 이용하여 고빈도 자질을 선정하고 저빈도 자질을 제거한 자질선정 방법이 문헌빈도보다 더 좋은 성능을 가져오는 것으로 나타났다. 둘째, 문헌빈도와 장서빈도 모두 저빈도 자질을 우선으로 선정하는 방법은 좋은 분류성능을 가져오지 못했다. 셋째, 장서빈도와 같은 단순빈도에서 자질 선정 구간을 조정하는 것이 문헌빈도와 장서빈도의 조합보다 더 좋은 성능을 가져오는 것으로 나타났다.

• Journal of Power Electronics
• /
• 제19권2호
• /
• pp.509-518
• /
• 2019

A novel islanding detection method is proposed in this paper. It is based on a frequency drooping PLL, which was presented in a previous work. The cause of errors in the non-detection zone (NDZ) of conventional frequency disturbance islanding detection methods (IDM) is analyzed. A frequency drooping phase-locked-loop (FD-PLL) is introduced into a single-phase grid-connected inverter (SPGCI), which can guarantee that grid current is in phase with the grid voltage. A novel FD-PLL IDM is proposed by improving this PLL. In order to verify the performance of the proposed FD-PLL IDM, a full performance comparison between the proposed IDM and typical existing active frequency drift IDMs is carried out, which includes both dynamic performance and steady performance. With the same NDZ, the total harmonic distortion of the grid-current in the dynamic process and steady state is analyzed. The proposed FD-PLL IDM, regardless of the dynamic or steady process, has the best power quality. Experimental and simulation results verify that the proposed FD-PLL IDM has excellent performance.