• Korean Journal of Optics and Photonics
• /
• v.16 no.6
• /
• pp.527-534
• /
• 2005

We investigate the pulsation characteristics in a multi-section DFB laser which is composed of one DFB section, phase tuning section, and gain section. Multi-section DFB lasers with anti-phase (AP) complex-coupled (CC) DFB structure show wide current ranges of gain and phase tuning sections fer stable pulsations compared to those with in-phase CC DFB structure or index-coupled DFB structure. For multi-section DFB lasers with AP CC DFB structure, the current range of a gain section for stable pulsations increases and the tuning range of the pulsation frequency increases as a coupling strength or a gain coupling coefficient increases Also, the tuning range using the phase variation in a phase tuning section increases. For a fixed coupling strength, the current ranges of gain and phase tuning sections for stable pulsations increase and the tuning range of the pulsation frequency increases as the length of a DFB section increases.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.3
• /
• pp.463-468
• /
• 2021

In this paper, when a refractive index grating and a gain grating were simultaneously present in a DFB laser having a wavelength of 1.55 ㎛, a dielectric film coating was applied so that reflection did not occur on the right mirror surface, so that 𝜌_r=0. In case of 𝛿L>0, the characteristics of the oscillation frequency and oscillation gain were analyzed. When the grating phase of the left mirror surface continues to decrease from 𝜋, the graph lines of each mode gradually shift to the left. In case of 𝜅L=10, the threshold gain of the oscillation mode is the lowest. In this case, the mode selectivity is relatively low. From 𝜅L=0.5 to 𝜅L=6, the mode selectivity and the frequency stability are excellent. In the case of DFB lasers with an anti-reflection coated mirror, the threshold gain of the oscillation mode increases but the mode selectivity is about twice as excellent, compared with DFB lasers of having two cleaved facets.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2725-2730
• /
• 2003

In this study we present a vibration controller for articulated robots that has flexible joints modeled as a 2-mass system. Most of articulated robots have time varying load inertias for each axis according to its motion. Moreover, the inertias vary drastically; for the base axis of articulated robots it may vary about 10 times of its minimum value. But, for industrial robots and many mechatronic devices, it is desirable to maintain control performance in spite of load inertia variation. So we propose a control gain adjustment rule considering the time-varying nature of load inertia. In this gain-adjusting algorithm, the pole locations are in proportion to the anti-resonance frequency of the 2-mass system. The simulation and experimental results show uniform properties in overshoot in spite of the variation of load.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.341-344
• /
• 2002

This paper is proposed a 8-bit analog to digital converter for CMOS image sensor. A analog to digital converter for CMOS image sensor is required function to control gain. Frequency divider is used In control gain in this proposed analog to digital converter. At 3.3 Volt power supply, total static power dissipation is 8㎽ and programmable gain control range is 30㏈. Newly suggested analog to digital converter is designed by 0.35um 2-poly 4-metal CMOS technology.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.22 no.1
• /
• pp.1-8
• /
• 2017

The optimal gain design method of a three-phase boost converter is proposed in this study. The control system has a two-loop configuration, in which each controller is coupled closely; thus, the optimal design is difficult to achieve using conventional gain-tuning method. The proposed method is adopted to the MATLAB SISO TOOL software and is based on the controller requirements, which are phase margin and cut-off frequency of the open-loop system. The optimal proportional -integral gains can be designed easily using the proposed interactive method of the SISO TOOL. The performance of the proposed system is verified through simulation and experiments.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.7
• /
• pp.1001-1007
• /
• 2014

This paper proposes a method to reduce operation time using discrete cosine transform and to improve image quality by the DC gain correction. Conventional filtered back projection (FBP) filtering in the frequency domain using Fourier transform, but the filtering process uses complex number operations. To simplify the filtering process, we propose a filtering process using discrete cosine transform. In addition, the image quality of reconstructed images are improved by correcting DC gain of sinograms. To correct the DC gain, we propose to find an optimum DC weight is defined as the ratio of sinogram DC and optimum DC. Experimental results show that the proposed method gets better performance than the conventional method for phantom and clinical CT images.

• Proceedings of the KIEE Conference
• /
• 2000.11d
• /
• pp.632-634
• /
• 2000

The robust design of controllers to ensure gain and phase margin is can be use approximation of arctan function. In this paper, We proposed a tuning algorithm PID controllers based on specified gain and phase margin by a new approximation of arctan function. This method have linear interpolation equations of two arctan interval instead of one arctan interval of arctan(x). It is shown that the frequency response of this method was to ensure specified gain and phase margin.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1012-1014
• /
• 2001

The AT Forward MRC is studied on the stability. The compensator is composed of the error amp with 3 poles and 2 zeros. This is optimized through the experiment. The converter loop gain is measured using HP4194A. We are initiated by the thinking of how to make the stabilization from the experimental results of loop gam curves. The loop gain, low frequency gain and gain margin are more improved through the experimental considerations.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.460-463
• /
• 2004

There is a trend to replace TWTA of SSPA in S-Band uplink application for satellite operation. KARI developed l20W full S-Band SSPA system in early 2004. This paper covers SSPA system design and its test results. Through tests, nominal gain of 57dB, gain stability of +/-1dB over frequency, and gain stability of +/-0.5dB over temperature were shown. IMD value of -16.5dBc, -19dBc were revealed in PI and P3 output operations. With meeting specifications, l20W SSPA is expected to be used in operational S-Band uplink application.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.191-194
• /
• 1999

The balanced amplifier is a practical amplifier to, implement a broadband amplifier that has flat gain and good input and output VSWR. Three-stage amplifier design procedure usually divided into three partition satisfying the following requirements : low noise figure, high gain and high power output. FHX35LG HEMT device is used in the design can be obtained low noise figure at the first-stage, MGA82563 MMIC device is used in the design can be maintained high gain at the second-stage, and AHI MMIC device is used in the design can be required high power output at the third-stage. The results of three-stage balanced amplifier show that power gain is about 40㏈, noise figure is less than 1.2㏈ at operating frequency.